

| Parameter | Value |
|---|---|
| GTIN | Four trillion fifty five billion six hundred twenty six million four hundred fifty eight thousand thirty eight |
| (Cable) | Information on hazardous substances is given in the manufacturer's Declaration in tab "Download" |
| Order code | One million four hundred twenty six thousand three hundred five |
| Packaging unit | One |
| ETIM 7.0 (eCl@ss) | EC001262 |
| China RoHS (Cable) | The time period for use (EFUP) of 50 years |
| REACh SVHC (Cable) | |
| (Parameters head 1) | Cast under pressure. zinc, Nickel-plated (Screw elements) |
| (Ambient conditions) | EtherCAT®, 100 Mbit/s |
| Color (Parameters head 1) | black |
| (General characteristics) | Cast under pressure. zinc, Nickel-plated (Screw elements) |
| Coding (Parameters head 1) | A (Standard) |
| Poles (Ambient conditions) | Four |
| eCl@ss 7.0 (Classification) | Twenty seven million sixty thousand three hundred eight |
| eCl@ss 9.0 (Classification) | Twenty seven million sixty thousand three hundred eight |
| (Standards and regulations) | -40 °C ... 70 °C (cable, for flexible installation) |
| Cable length (Commercial data) | 8 m |
| Color (General characteristics) | black |
| Coding (General characteristics) | A (Standard) |
| Rated voltage (Ambient conditions) | 30 V AC |
| Travel (Standards and regulations) | 10 m |
| Performance head (Parameters head 1) | Plug straight M8 / IP67 |
| Impedance (Standards and regulations) | 100 Ω ±15 Ω (1 ... 100 MHz) |
| Screening (Standards and regulations) | Film covered with the aluminum braid of tinned copper wires |
| Tightening torque (Parameters head 1) | 0.2 Nm |
| Cable type (Standards and regulations) | PROFINET, the conveyor chain, CAT5 |
| Material, contact (Ambient conditions) | CuSn |
| Color lived (Standards and regulations) | white, yellow, blue, orange |
| Cycles installation (Parameters head 1) | ≥ 100 |
| Acceleration (Standards and regulations) | 4 m/S2 |
| Cable design (Standards and regulations) | 1x4xAWG22/7; SF/TQ |
| Halogen-free (Standards and regulations) | Yes |
| Insulation resistance (Parameters head 1) | ≥ 100 MΩ |
| Material (components) (Parameters head 1) | CuSn (Contact) |
| Oil resistant (Standards and regulations) | in accordance with DIN EN 60811-2-1 |
| Signal type/category (Ambient conditions) | Ethernet, 100 Mbit/s |
| The weakening (Standards and regulations) | 2.1 dB (at 1 MHz) |
| Bending radius (Standards and regulations) | 100 mm |
| Performance head (General characteristics) | Plug straight M8 / IP67 |
| AWG signal line (Standards and regulations) | Twenty two |
| Loop resistance (Standards and regulations) | ≤ 120,00 Ohm/km |
| Tightening torque (General characteristics) | 0.2 Nm |
| Weight of cable (Standards and regulations) | 61 kg/km |
| Ambient temperature (operating) (Dimensions) | -25 °C ... 90 °C (plug / socket) |
| Crosstalk (NEXT) (Standards and regulations) | 80 dB (at 1 MHz) |
| General twisting (Standards and regulations) | Four star twists |
| Incombustibility (Standards and regulations) | according to IEC 60332-1-2 |
| Rated current at 40 ℃ (Ambient conditions) | 4 A |
| Cycles installation (General characteristics) | ≥ 100 |
| Material contact surface (Ambient conditions) | Ni/Au |
| Conductor material (Standards and regulations) | flexible wire made from galvanized copper |
| Marking of article (Standards and regulations) | "sequential length in metres" PN-CABLE-934-C / PUR-4X22AWG/7 Trailing * 22AWG (SHIELDED) (UL) E119100 CMX 75°C VERIFIED (UL) CAT 5E PATCH CABLE FRNC * (Marking of the cables supplier) |
| Outer shell, color (Standards and regulations) | green RAL 6018 |
| Wire cross-section (Standards and regulations) | 4x 0.34 mm2 |
| Insulation resistance (General characteristics) | ≥ 100 MΩ |
| Material (components) (General characteristics) | CuSn (Contact) |
| Signal type/category (Standards and regulations) | PROFINET CAT5 (IEC 11801), 100 Mbps |
| The material holder contact (Ambient conditions) | TPU GF |
| Vitality, other data (Standards and regulations) | resistant to UV radiation |
| Insulation resistance (Standards and regulations) | ≥ 500 MΩ*km |
| Other characteristics (Standards and regulations) | Electrical characteristics according to EN 50288-2-2 |
| Number of contacts (interface) (Parameters head 1) | Four |
| Outer sheath, material (Standards and regulations) | PUR |
| Standards/normative documents (Ambient conditions) | M8 connector IEC 61076-2-104 |
| Ambient temperature (operating) (Parameters head 1) | -25 °C ... 90 °C |
| Standards / normative documents (Parameters head 2) | IEC 61076-2-104 |
| The designation of the standard (Parameters head 2) | Connector M8 |
| The load on the torsion (Standards and regulations) | ± 30 °/m |
| The speed of the signal (Standards and regulations) | 0,66 c |
| Outer diameter of cable D (Standards and regulations) | 6.5 mm ±0.2 mm |
| Nominal voltage, conductor (Standards and regulations) | 600 V (UL Nominal) |
| Test voltage phase / phase (Standards and regulations) | 2000 V (50 Hz, 1 min.) |
| Test voltage phase / screen (Standards and regulations) | 2000 V (50 Hz, 1 min.) |
| The tensile strength of GRP (Standards and regulations) | ≤ 150 N |
| Number of contacts (interface) (General characteristics) | Four |
| The number of bending cycles (Standards and regulations) | Three million |
| Ambient temperature (operating) (General characteristics) | -25 °C ... 90 °C |
| Cable design, the signal line (Standards and regulations) | 7x 0.25 mm |
| Material conductor insulation (Standards and regulations) | PE |
| The speed of lateral movement (Standards and regulations) | 4 m/c |
| Cable type (short designation) (Standards and regulations) | 93C |
| Ambient temperature (operating) (Standards and regulations) | -40 °C ... 70 °C (cable firmly laid) |
| The material of the inner shell (Standards and regulations) | FRNC |
| The resistance of the interface (Standards and regulations) | ≤ 20,00 mω/m (at 10 MHz) |
| The propagation time of the signal (Standards and regulations) | 5,3 NSm/m |
| Conductor diameter incl. insulation (Standards and regulations) | 1.5 mm |
| Minimum bending radius, rigid strip (Standards and regulations) | 5 x D |
| Ambient temperature (with the gasket) (Standards and regulations) | -20 °C ... 60 °C |
| The wall thickness of the outer shell (Standards and regulations) | about 0.9 mm |
| Minimum bending radius, flexible strip (Standards and regulations) | 7,5 x D |
| Ambient temperature (storage/transport) (Standards and regulations) | -50 °C ... 70 °C |
| the protective shield of the fiber optic cable (Standards and regulations) | 85 % |
Technical specifications and performance data
Installation and operation guide