NA13CT

Emergency Stop and Safety Gate ModulesNA13CT• Safety Category 3 according to EN 954-1• Category 1 Emergency Stop• 3 NO delayed safety outputs• 1 NC auxiliary delayed output• 24 VDC or 18 VAC power supply• Single channel operation• Automatic or manual reset• Failure diagnosis by LEDsProduct DescriptionOrdering KeyNA13 C TEmergency Stop and Safety Gate modules for category 1 emergency STOP according toEN 60204-1, EN 292-1 /-2, EN418, EN 1088 and EN 954-1.Housing Application Controlled Devices Safety Outputs Safety Category Delayed OutputsElectrical SpecificationsPower supply 18 VAC ± 10% 50-60Hz /24 VDC ± 10%Power consumption2 VA / 2 W Safety outputs3 NO delayed Auxiliary outputs1 NC delayed Contact ratingsResistive loads AC1 6 A @ 230 VACSmall inductive loads AC15 3 A @ 230 VACDC13 3 A @ 24 VDC (50000 cycles)Safety outputcontact fuse protection 4 A fast or 4 A delayedInsulation voltageSupply to inputnoneSupply to output 4 kV 1.2/50µsInput to output4 kV 1.2/50µsPollution degree 2Overvoltage category IIITimeSpecificationsEnvironmental SpecificationsDelay on energisation ≤ 100 msDelay on de-energisation1.2 s ± 0.5 sec @ 24 VDCRecovery timeTd + 0,4 s Delay time Td 1 s Channel simultaneity InfiniteOperating temperature-25°C ... + 65°CStorage temperature -25°C ... + 65°CMechanical SpecificationsProtection degree terminals IP 20Protection degree housing IP 40Max cross sectionof external conductors2.5 mm2 flexible wire2Housing materialPolyamid PA 6.62.5 mmrigid wireHousing type22.5 mm housing modelsMountingDIN railDimensions22.5 x 99 x 114 mmWeight 200 gSpecifications are subjected to change without notice (20.04.07) 1