In Stock Hot Product
MVSTBW 2,5/ 9-ST-5,08BD12-U+SO
MVSTBW 2,5/ 9-ST-5,08BD12-U+SO 1032556 PHOENIX CONTACT Printed-circuit board connector MVSTBW 2,5/ 9-ST-5,08..
$0.00USD
4471 in stock
Key Specifications
EAN:Four trillion fifty five billion six hundred twenty six million five hundred thirty seven thousand one hundred thirty nine
Key order:One million thirty two thousand five hundred fifty six
(Drawings):
Key selling:AAAFBA -
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| EAN | Four trillion fifty five billion six hundred twenty six million five hundred thirty seven thousand one hundred thirty nine |
| Key order | One million thirty two thousand five hundred fifty six |
| (Drawings) | |
| Key selling | AAAFBA - |
| Packing unit | 50 pcs |
| Step (Drawings) | 5,08 mm |
| ETIM 5.0 (eCl@ss) | EC002638 |
| ETIM 6.0 (eCl@ss) | EC002638 |
| ETIM 7.0 (eCl@ss) | EC002638 |
| Tariff number tariff | Eighty five million three hundred sixty six thousand nine hundred ninety |
| eCl@ss 4.0 (Ratings) | Twenty seven million two hundred sixty thousand seven hundred |
| eCl@ss 4.1 (Ratings) | Twenty seven million two hundred sixty thousand seven hundred |
| eCl@ss 5.0 (Ratings) | Twenty seven million two hundred sixty thousand seven hundred |
| eCl@ss 5.1 (Ratings) | Twenty seven million two hundred sixty thousand seven hundred |
| eCl@ss 6.0 (Ratings) | Twenty seven million two hundred sixty thousand seven hundred |
| eCl@ss 7.0 (Ratings) | Twenty seven million four hundred forty thousand three hundred nine |
| eCl@ss 8.0 (Ratings) | Twenty seven million four hundred forty thousand three hundred nine |
| eCl@ss 9.0 (Ratings) | Twenty seven million four hundred forty thousand three hundred nine |
| Result (Tensile test) | Test approved |
| Minimum order quantity | 50 pcs |
| Abbreviation (Drawings) | Plug-in connector for plate circ. printed |
| Plug-in system (Drawings) | CLASSIC COMBICON |
| Number of poles (Drawings) | Nine |
| Type of contact (Drawings) | Female connection |
| (Environmental conditions) | Test approved |
| Number of floors (Drawings) | One |
| Observation (Ability conex.) | According to WEEE/RoHS, without filaments according to IEC 60068-2-82/JEDEC JESD 201 |
| Family of articles (Drawings) | MVSTBW 2,5/..-ST |
| Type of connection (Drawings) | Connection by screw with capsule-traction |
| Visual Control (Tensile test) | Test passed DIN en 60512-1-1:2003-01 |
| Number of potential (Drawings) | Nine |
| Step (Material data - housing) | 5,08 mm |
| Check dimensions (Tensile test) | Test passed DIN en 60512-1-2:2003-01 |
| Number of cycles (Tensile test) | Twenty five |
| Number of connections (Drawings) | Nine |
| Average (Material data - housing) | 40,64 mm |
| Material contact (Ability conex.) | Cu alloy |
| Unit weight (excluding packaging) | 20,070 g |
| Effort cold (Checks resistance (B)) | -40 °C/2 h |
| Isolation (Material data - contact) | PA |
| Resistance of prints (Tensile test) | Test passed DIN en 60068-2-70:1996-07 |
| Observation (Indications of packing) | According to the standard DIN en 61984, connectors, COMBICON are connectors no power switching (COC). In the case of a use in accordance with what is prescribed, these should not be plugged or unplugged under voltage or under load. |
| Strength trial-by-polo (Tensile test) | 33 N |
| Width [ w ] (Material data - housing) | 45,72 mm |
| (Connection and method of connection) | 2.5 mm2 / flexible / > 50 N |
| Height [ h ] (Material data - housing) | 26 mm |
| Length [ l ] (Material data - housing) | 12.5 mm |
| Polarization and coding (Tensile test) | Test passed DIN en 60512-13-5:2006-11 |
| Thermal stress (Checks resistance (B)) | 100 °C/168 h |
| Type of packaging (Product dimensions) | packaged in box |
| Color housing (Material data - contact) | green (6021) |
| Cycles of plug (Mechanical testing (A)) | Twenty five |
| Specification of the test (Tensile test) | DIN EN 60512-15-1:2009-03 |
| plug-in (Characteristic data electrical) | yes |
| Fatigue corrosion (Checks resistance (B)) | 0,2 dmThreeSOTwoin 300 dmThree/40 °C/1 cycle |
| Rated current (Properties of the article) | 12 To |
| Rated voltage (Properties of the article) | 320 V |
| (Checks and environmental resistance (E)) | You will find information about hazardous substances in the manufacturer's declaration in the "Downloads"tab |
| Tension sizing (Properties of the article) | 250 V |
| Ac voltage bearable (Checks resistance (B)) | 2,21 kV |
| Shape of the drive head of screw (Drawings) | Lengthwise slot (L) |
| Ac voltage bearable (Mechanical testing (A)) | 2,21 kV |
| Outline dimensions (Material data - housing) | |
| Designation packing Units (Product dimensions) | Units |
| Characteristics of the surface (Ability conex.) | tinning of malleable cast iron |
| Contact resistance ROne (Mechanical testing (A)) | 2,6 mΩ |
| Contact resistance RTwo (Mechanical testing (A)) | 2,6 mΩ |
| Force to the plug by polo approx. (Tensile test) | 8 N |
| Specification of the test (Checks resistance (B)) | DIN EN ISO 6988:1997-03 |
| Specification of the test (Essays on climate (D)) | DIN EN 61984 (VDE 0627):2009-11 |
| Length of peeling (Characteristic data electrical) | 7 mm |
| Specification of the test (Mechanical testing (A)) | DIN EN 60512-9-1 (VDE 0687-512-9-1):2010-12 |
| Tensile test (Connection and method of connection) | DIN EN 60999-1 (VDE 0609-1):2000-12 |
| Tightening torque (Characteristic data electrical) | 0.5 Nm ... 0.6 Nm |
| Group insulating material (Material data - contact) | I |
| Type of connection (Characteristic data electrical) | Connection by screw with capsule-traction |
| CTI according to IEC 60112 (Material data - contact) | Six hundred |
| China RoHS (Checks and environmental resistance (E)) | Space of time for the intended use (FEUP): 50 years |
| REACh SVHC (Checks and environmental resistance (E)) | Lead 7439-92-1 |
| Force when unplugging per pole approx. (Tensile test) | 6 N |
| Tension and sizing (II/2) (Properties of the article) | 630 V |
| Tension and sizing (III/2) (Properties of the article) | 320 V |
| Voltage shock endurable level sea (Checks resistance (B)) | To 4.8 kV |
| Metal surface area of contact (top layer) (Ability conex.) | Tin (4 - 8 ám Sn) |
| Specification of the test (Lines of flight and air spaces) | DIN EN 61984 (VDE 0627) |
| Voltage shock endurable level sea (Mechanical testing (A)) | To 4.8 kV |
| Result-Degree of protection IP Code (Essays on climate (D)) | Protection against contact of fingers with finger proof IP20 |
| Room temperature (service) (General indications of product) | -40 °C ... 100 °C (in function of the curve derating) |
| Section of conductor rigid (Characteristic data electrical) | 0,2 mm2 ... 2.5 mm2 |
| Transient voltage design (II/2) (Properties of the article) | 4 kV |
| Transient voltage design (III/2) (Properties of the article) | 4 kV |
| Transient voltage design (III/3) (Properties of the article) | 4 kV |
| Insulation resistance Pole-contiguous (Mechanical testing (A)) | > 0.2 TΩ |
| Section of flexible conductor (Characteristic data electrical) | 0,2 mm2 ... 2.5 mm2 |
| Ambient temperature (assembly) (General indications of product) | -5 °C ... 100 °C |
| Section of conductor AWG / kcmil (Characteristic data electrical) | 24 ... 12 |
| Class of flammability according to UL 94 (Material data - contact) | V0 |
| Metal surface of the point of embornaje (top layer) (Ability conex.) | Tin (4 - 8 ám Sn) |
| DiagramType: MVSTBW 2,5/..-ST-5,08 with MDSTB 2,5/..-G-5,08 (Drawings) | |
| DiagramType: MVSTB(R/W) 2,5/...-ST with MDSTBV 2,5/...-G-5,08 (Drawings) | |
| Specification of the test (Curves of current capacity / curves derating) | DIN EN 61984 (VDE 0627) |
| DiagramType: MVSTB(R/W) 2,5/...-ST with MDSTBVA 2,5/...-G-5,08 (Drawings) | |
| Specification of the test (Mechanical testing according to the standards) | DIN EN 60664-1 (VDE 0110-1):2008-01 |
| Ambient temperature (storage / transport) (General indications of product) | -40 °C ... 70 °C |
| 2 conductors with same cross section, rigid (Characteristic data electrical) | 0,2 mm2 ... 1 mm2 |
| Checking of damage in the conductors and loosening (Environmental conditions) | DIN EN 60999-1 (VDE 0609-1):2000-12 |
| DiagramType: MVSTB(R/W) 2,5/...-ST-5,08 with MDSTBW 2,5/...-G-5,08 (Drawings) | |
| Air spaces and lines of flight (Mechanical testing according to the standards) | DIN EN 60664-1 (VDE 0110-1):2008-01 |
| 2 conductors with same cross section, flexible (Characteristic data electrical) | 0,2 mm2 ... 1.5 mm2 |
| Force to the plug by polo approx. (Curves of current capacity / curves derating) | 8 N |
| Height of building (height without the shank of soldering) (Material data - housing) | 26 mm |
| Portacontactos used requirement >20 N (Curves of current capacity / curves derating) | Test approved |
| Force when unplugging per pole approx. (Curves of current capacity / curves derating) | 6 N |
| Minimum value of the line of flight (II/2) (Mechanical testing according to the standards) | 3.2 mm |
| Ignition temperature of filaments GWIT according to en 60695-2-13 (Material data - contact) | Seven hundred seventy five |
| Minimum value of the line of flight (III/2) (Mechanical testing according to the standards) | 3 mm |
| Minimum value of the line of flight (III/3) (Mechanical testing according to the standards) | 3.2 mm |
| Section of flexible conductor with toe, with plastic sleeve (Characteristic data electrical) | 0.25 mm2 ... 2.5 mm2 |
| Number of flammability of filaments GWFI according to en 60695-2-12 (Material data - contact) | Eight hundred fifty |
| Section of the driver / type of driver / traction force (Connection and method of connection) | 0,2 mm2 / stiff / > 10 N |
| Section of flexible conductor with toe cap, without plastic sleeve (Characteristic data electrical) | 0.25 mm2 ... 2.5 mm2 |
| Temperature test of the hardness for the balls according to en 60695-10-2 (Material data - contact) | 125 °C |
| Minimum value of air gap - field inhomogéneo (II/2) (Mechanical testing according to the standards) | 3 mm |
| Minimum value of air gap - field inhomogéneo (III/2) (Mechanical testing according to the standards) | 3 mm |
| Minimum value of air gap - field inhomogéneo (III/3) (Mechanical testing according to the standards) | 3 mm |
| 2 conductors of equal section, flexible, with toe cap, without plastic sleeve (Characteristic data electrical) | 0.25 mm2 ... 1 mm2 |
| Requirement of impossibility of confusion when connecting >20 N (Curves of current capacity / curves derating) | Test approved |
| 2 conductors with same cross section, flexible with toe cap TWIN with plastic sleeve (Characteristic data electrical) | 0.5 mm2 ... 1.5 mm2 |
Product Description
Connector for printed circuit board, nominal section: 2.5 mm², color: green, nominal current: 12 A, dimensioning voltage (III/2): 320 V, contact surface: Tin, contact type: Female connection, Number o
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Technical Details
DiagramType: MVSTB(R/W) 2,5/...-ST with MDSTBVA 2,5/...-G-5,08
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
