In Stock Hot Product
MSTB 2,5 HC/ 5-GF-5,08 CR2,4
MSTB 2,5 HC/ 5-GF-5,08 CR2,4 1480252 PHOENIX CONTACT Printed circuit board base housing, nominal section: 2...
$2.68USD
3765 in stock
Key Specifications
Step:5.08 mm
Screw:ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C sheet metal screw
Result:Approved Test
Amplitude:0.35 mm (10 Hz ... 60.1 Hz)
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| Step | 5.08 mm |
| Screw | ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C sheet metal screw |
| Result | Approved Test |
| Amplitude | 0.35 mm (10 Hz ... 60.1 Hz) |
| Width [w] | 35.56 mm |
| frequency | 10 - 150 - 10 Hz |
| Height [h] | 11.8 mm |
| Length [l] | 12 mm |
| Pin Design | Linear Pin Arrangement |
| Shock Type | Semi-sinusoidal |
| Observation | WEEE/RoHS compliant, filament-free according to IEC 60068-2-82/JEDEC JESD 201 |
| Plug Cycles | 50 |
| Sweep speed | 1 octave/min |
| Acceleration | 30g |
| Product Line | COMBICON Connectors M |
| Product Type | Printed circuit board base housing |
| Hole diameter | 1.4 mm |
| Number of rows | 1 |
| Overall Height | 8.57 mm |
| Product Family | MSTB 2.5 HC/.. -GF |
| Thermal stress | 100 °C/168 h |
| Color (Housing) | Green (6021) |
| Number of poles | 5 |
| Test Directions | X, Y, and Z axes (pos. and neg.) |
| Contact material | Cu Alloy |
| Dimension Scheme | |
| Number of cycles | 50 |
| Type of mounting | Wave soldering |
| Corrosion fatigue | 0.2 dm3UNDER2in 300 dm3/40 °C/1 cycle |
| Temple Dimensions | 1 x 1 mm |
| Tightening torque | 0.3 Nm |
| Type of packaging | Boxed Packaging |
| Contact resistance | 1 mΩ |
| Nominal Current IN | 16 A (see rating curve) |
| Nominal voltage UN | 320 V |
| Test Specification | DIN EN 60512-1-1:2003-01 |
| Bearable AC voltage | 2.21 kV |
| Degree of pollution | 3 |
| Insulating material | PA |
| Weld Pin Length [P] | 3.23 mm |
| Contact Resistance R1 | 1 mΩ |
| Contact Resistance R2 | 1 mΩ |
| Duration of the crash | 18 ms |
| Plug-in force approx. | 6 N |
| Nominal voltage (II/2) | 630 V |
| Number of poles tested | 12 |
| Sizing voltage (III/3) | 320 V |
| Test duration per axis | 2.5 h |
| Surface Characteristics | Galvanically tinned |
| Insulating material group | I |
| CTI according to IEC 60112 | 600 |
| Dimensioning voltage (III/2) | 320 V |
| Ambient Temperature (Service) | -40 °C ... 100 °C (depending on the rating curve) |
| Ambient Temperature (Mounting) | -5 °C ... 100 °C |
| Nominal transient voltage (II/2) | 4 kV |
| Sizing Insulation Voltage (II/2) | 630 V |
| Nominal transient voltage (III/2) | 4 kV |
| Nominal transient voltage (III/3) | 4 kV |
| Sizing Insulation Voltage (III/2) | 320 V |
| Sizing Insulation Voltage (III/3) | 320 V |
| Minimum creepage line value (II/2) | 3.2 mm |
| Bearable shock voltage at sea level | 4.8 kV |
| Metal surface weld area (top layer) | Tin (3 - 5 μm Sn) |
| Minimum creepage line value (III/2) | 3 mm |
| Minimum creepage line value (III/3) | 4 mm |
| Number of Solder Pins Per Potential | 1 |
| Observation regarding the operation | According to DIN EN 61984, COMBICON connectors are connectors without switching power (COC). In the event of use as prescribed, they must not be plugged in or unplugged under voltage or load. |
| Contact Holder UsedRequirement >20 N | Approved Test |
| Insulation Resistance Adjacent Poles | > 5 MΩ |
| Dimensioning transient voltage (II/2) | 4 kV |
| Flammability class according to UL 94 | V0 |
| Power when unplugging by pole approx. | 5 N |
| Dimensioning Transient Voltage (III/2) | 4 kV |
| Dimensioning transient voltage (III/3) | 4 kV |
| Metal surface contact area (top layer) | Tin (3 - 5 μm Sn) |
| Ambient Temperature (Storage/Transport) | -40 °C ... 70 °C |
| Metal Surface Contact Area (Middle Layer) | Nickel (1.3 - 3 μm Ni) |
| Metal Surface Welding Area (Middle Layer) | Nickel (1.3 - 3 μm Ni) |
| Relative humidity of the air (storage/transport) | 30 % ... 70 % |
| Ball hardness test temperature according to EN 60695-10-2 | 125 °C |
| Resistance to leakage currents (DIN EN 60112 (VDE 0303-11)) | CTI 600 |
| Minimum Value of Air Insulation Distance - Non-Homogeneous Field (II/2) | 3 mm |
| Minimum Value of Air Insulation Distance - Non-Homogeneous Field (III/2) | 3 mm |
| minimum value of air insulation distance - non-homogeneous field (III/3) | 3 mm |
| Flammability number of GWFI incandescent filaments according to EN 60695-2-12 | 850 |
| Ignition temperature of incandescent filaments GWIT according to EN 60695-2-13 | 775 |
Product Description
PCB base housing, nominal cross-section: 2.5 mm², colour: green, nominal current: 16 A (see rating curve), nominal voltage (III/2): 320 V, surface contacts: Tin, contact type: Male, number of rows: 1,
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
