In Stock Hot Product
MKKDSG 3/ 2 BD:22-21
MKKDSG 3/ 2 BD:22-21 1537250 PHOENIX CONTACT PCB terminal, rated current: 17.5 A, rated voltage (III/2): 400..
$0.00USD
3610 in stock
Key Specifications
:0.2 mm² / flexible / > 10 N
Step:5 mm
Result:Approved Test
Amplitude:0.35 mm (10 Hz ... 60.1 Hz)
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| 0.2 mm² / flexible / > 10 N | |
| Step | 5 mm |
| Result | Approved Test |
| Amplitude | 0.35 mm (10 Hz ... 60.1 Hz) |
| Width [w] | 10 mm |
| frequency | 10 - 150 - 10 Hz |
| Height [h] | 36.4 mm |
| Length [l] | 22.3 mm |
| Pin Design | Linear Pin Arrangement |
| Observation | WEEE/RoHS compliant, filament-free according to IEC 60068-2-82/JEDEC JESD 201 |
| Peel Length | 7 mm |
| Sweep speed | 1 octave/min |
| Temperature | 850 °C |
| Construction | Card terminal, alignable |
| Product Line | COMBICON Terminals M |
| Product Type | Printed Circuit Board Terminal |
| Hole diameter | 1.3 mm |
| Number of rows | 2 |
| Overall Height | 31.4 mm |
| Product Family | MKKDSG 3 |
| Color (Housing) | Green (6021) |
| Connection type | Screw connection with traction capsule |
| Nominal Section | 2.5 mm² |
| Number of poles | 2 |
| Contact material | Cu Alloy |
| Dimension Scheme | |
| Performance Time | 5 s |
| Type of mounting | Wave soldering |
| Temple Dimensions | 0.9 x 0.9 mm |
| Tightening torque | 0.5 Nm ... 0.6 Nm |
| Type of packaging | Boxed Packaging |
| Nominal Current IN | 17.5 A |
| Nominal voltage UN | 400 V |
| Test Specification | DIN EN 60998-2-1 (VDE 0613-2-1):1994-04 |
| Degree of pollution | 3 |
| Insulating material | PA |
| Weld Pin Length [P] | 5 mm |
| AWG Conductor Section | 24 ... 12 |
| Nominal voltage (II/2) | 630 V |
| Sizing voltage (III/3) | 250 V |
| Test duration per axis | 2.5 h |
| Drive shape: screw head | Longitudinal groove (L) |
| Rigid conductor section | 0.2 mm² ... 4 mm² |
| Surface Characteristics | Galvanically tinned |
| Heating test requirement | Temperature rise ≤ 45 K |
| Insulating material group | I |
| CTI according to IEC 60112 | 600 |
| Flexible conductor section | 0.2 mm² ... 2.5 mm² |
| Dimensioning voltage (III/2) | 400 V |
| Ambient Temperature (Service) | -40 °C ... 100 °C (Based on current/derating load capacity curve) |
| Ambient Temperature (Mounting) | -5 °C ... 100 °C |
| Nominal transient voltage (II/2) | 4 kV |
| Sizing Insulation Voltage (II/2) | 630 V |
| Nominal transient voltage (III/2) | 4 kV |
| Nominal transient voltage (III/3) | 4 kV |
| Sizing Insulation Voltage (III/2) | 400 V |
| Sizing Insulation Voltage (III/3) | 250 V |
| Minimum creepage line value (II/2) | 3.2 mm |
| Metal surface weld area (top layer) | Tin (4 - 8 μm Sn) |
| Minimum creepage line value (III/2) | 3 mm |
| Minimum creepage line value (III/3) | 3.2 mm |
| Number of Solder Pins Per Potential | 1 |
| Insulation Resistance Adjacent Poles | 109Ω |
| Dimensioning transient voltage (II/2) | 4 kV |
| Flammability class according to UL 94 | V0 |
| Dimensioning Transient Voltage (III/2) | 4 kV |
| Dimensioning transient voltage (III/3) | 4 kV |
| Ambient Temperature (Storage/Transport) | -40 °C ... 70 °C |
| Warning Regarding the Connection Section | With the 4 mm² (rigid) conductor attached. |
| 2 conductors with the same cross-section, rigid | 0.2 mm² ... 1.5 mm² |
| Metal surface of the terminal point (top layer) | Tin (4 - 8 μm Sn) |
| Relative humidity of the air (storage/transport) | 30 % ... 70 % |
| 2 conductors with the same cross-section, flexible | 0.2 mm² ... 1.5 mm² |
| Ball hardness test temperature according to EN 60695-10-2 | 125 °C |
| Resistance to leakage currents (DIN EN 60112 (VDE 0303-11)) | CTI 600 |
| Flexible conductor section with toe cap, with plastic sleeve | 0.25 mm² ... 2.5 mm² |
| Flexible conductor section with toe cap, without plastic sleeve | 0.25 mm² ... 1.5 mm² |
| Minimum Value of Air Insulation Distance - Non-Homogeneous Field (II/2) | 3 mm |
| Minimum Value of Air Insulation Distance - Non-Homogeneous Field (III/2) | 3 mm |
| minimum value of air insulation distance - non-homogeneous field (III/3) | 3 mm |
| Conductor Section/Conductor Type/Tensile Force Nominal Value/Actual Value | 0.2 mm² / rigid / > 10 N |
| Flammability number of GWFI incandescent filaments according to EN 60695-2-12 | 850 |
| Ignition temperature of incandescent filaments GWIT according to EN 60695-2-13 | 775 |
| 2 conductors of equal cross-section, flexible with toe cap, without plastic sleeve | 0.25 mm² ... 0.75 mm² |
| 2 conductors with the same cross-section, flexible with TWIN toe cap with plastic sleeve | 0.5 mm² ... 0.5 mm² |
Product Description
More details
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
