In Stock Hot Product
MKDSN 1,5/ 3 HT BK
MKDSN 1,5/ 3 HT BK 1985852 PHOENIX CONTACT PCB terminal block
$0.00USD
3527 in stock
Key Specifications
:0.14 mm² / flexible / > 10 N
Note:WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201
Type:PC termination block
Pitch:5 mm
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| 0.14 mm² / flexible / > 10 N | |
| Note | WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201 |
| Type | PC termination block |
| Pitch | 5 mm |
| Result | Test passed |
| Process | Reflow/wave soldering |
| Amplitude | 0.35 mm (10 Hz ... 60.1 Hz) |
| Frequency | 10 - 150 - 10 Hz |
| Width [w] | 15 mm |
| Height [h] | 13.5 mm |
| Length [l] | 8.1 mm |
| Pin layout | Linear pinning |
| Sweep speed | 1 octave/min |
| Temperature | 850 °C |
| Acceleration | 5g (60.1 Hz ... 150 Hz) |
| Product line | COMBICON Terminals S |
| Product type | Printed circuit board terminal |
| Hole diameter | 1.3 mm |
| Mounting type | THR soldering / wave soldering |
| Specification | IEC 60999-1:1999-11 |
| Number of rows | 1 |
| Pin dimensions | 0.5 x 1 mm |
| Product family | MKDSN 1,5/..-HT |
| Color (Housing) | black (9005) |
| Test directions | X-, Y- and Z-axis |
| Article revision | 04 |
| Contact material | Cu alloy |
| Installed height | 10 mm |
| Stripping length | 6 mm |
| Time of exposure | 5 s |
| Connection method | Screw connection with tension sleeve |
| Tightening torque | 0.5 Nm ... 0.6 Nm |
| Type of packaging | packed in cardboard |
| Nominal current IN | 13.5 A |
| Nominal voltage UN | 320 V |
| Dimensional drawing | |
| Insulating material | PA |
| Note on application | For safe conductor connection, always adhere to a defined tightening torque. Particularly in the case of PCB terminal blocks with two or three positions, the individual solder pin for each contact point cannot compensate for this. That is why the terminal blocks must be supported during conductor connection (held with one hand, support on the housing). |
| Number of positions | 3 |
| Number of potentials | 3 |
| Outer packaging type | Dry bag |
| Rated voltage (II/2) | 320 V |
| Drive form screw head | Slotted (L) |
| Nominal cross section | 1.5 mm² |
| Number of connections | 3 |
| Rated voltage (III/2) | 320 V |
| Rated voltage (III/3) | 200 V |
| Solder pin length [P] | 3.5 mm |
| Test duration per axis | 2.5 h |
| Surface characteristics | Tin-plated |
| Moisture Sensitive Level | MSL 3 |
| Insulating material group | IIIa |
| Solder pins per potential | 1 |
| CTI according to IEC 60112 | 250 - 399 |
| Rated surge voltage (II/2) | 4 kV |
| Conductor cross section AWG | 26 ... 16 |
| Rated surge voltage (III/2) | 4 kV |
| Rated surge voltage (III/3) | 4 kV |
| Solder cycles in the reflow | 3 |
| Classification temperature Tc | 250 °C |
| Conductor cross section rigid | 0.14 mm² ... 1.5 mm² |
| Ambient temperature (assembly) | -5 °C ... 100 °C |
| Ambient temperature (operation) | -40 °C ... 105 °C (Depending on the current carrying capacity/derating curve) |
| Rated insulation voltage (II/2) | 320 V |
| Conductor cross section flexible | 0.14 mm² ... 1.5 mm² |
| Rated insulation voltage (III/2) | 320 V |
| Rated insulation voltage (III/3) | 200 V |
| minimum creepage distance (II/2) | 3.2 mm |
| Requirement temperature-rise test | The sum of ambient temperature and temperature rise of the PCB terminal block shall not exceed the upper limiting temperature. |
| minimum creepage distance (III/2) | 3.2 mm |
| minimum creepage distance (III/3) | 3.2 mm |
| Relative humidity (storage/transport) | 30 % ... 70 % |
| Flammability rating according to UL 94 | V0 |
| Ambient temperature (storage/transport) | -40 °C ... 70 °C |
| Comparative tracking index (IEC 60112) | CTI 250 - 399 |
| Metal surface soldering area (top layer) | Tin (5 - 7 µm Sn) |
| Metal surface terminal point (top layer) | Tin (5 - 7 µm Sn) |
| 2 conductors with same cross section, solid | 0.14 mm² ... 0.75 mm² |
| Metal surface soldering area (middle layer) | Nickel (2 - 3 µm Ni) |
| Metal surface terminal point (middle layer) | Nickel (2 - 3 µm Ni) |
| Insulation resistance, neighboring positions | > 5 MΩ |
| 2 conductors with same cross section, flexible | 0.14 mm² ... 0.75 mm² |
| minimum clearance value - non-homogenous field (II/2) | 3 mm |
| minimum clearance value - non-homogenous field (III/2) | 3 mm |
| minimum clearance value - non-homogenous field (III/3) | 3 mm |
| Conductor cross section, flexible, with ferrule, with plastic sleeve | 0.25 mm² ... 1.5 mm² |
| Conductor cross section flexible, with ferrule without plastic sleeve | 0.25 mm² ... 1 mm² |
| Conductor cross section/conductor type/tractive force setpoint/actual value | 0.14 mm² / solid / > 10 N |
| 2 conductors with same cross section, flexible, with ferrule without plastic sleeve | 0.25 mm² ... 0.5 mm² |
| 2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve | 0.5 mm² ... 0.75 mm² |
Product Description
Terminal block for printed circuit board, nominal current: 13.5 A, nominal voltage (III/2): 320 V, nominal section: 1.5 mm², number of potentials: 3, number of rows: 1, number of poles per row: 3, fam
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
