In Stock Hot Product
MKDSF 3/ 3 GY
MKDSF 3/ 3 GY 1030351 PHOENIX CONTACT PCB terminal block, nominal current: 24 A, rated voltage (III/2): 400 ..
$0.00USD
4589 in stock
Key Specifications
GTIN:4055626534213
Orderkey:1030351
Packing unit:1
(Vibration test):For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| GTIN | 4055626534213 |
| Orderkey | 1030351 |
| Packing unit | 1 |
| (Vibration test) | For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
| ETIM 5.0 (eCl@ss) | EC002643 |
| ETIM 6.0 (eCl@ss) | EC002643 |
| ETIM 7.0 (eCl@ss) | EC002643 |
| Custom tariff number | 85369010 |
| (Ambient conditions) | Test passed |
| Note (Connection capacity) | WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201 |
| China RoHS (Vibration test) | Environmentally Friendly Use Period = 50 |
| Pitch (Key Commercial Data) | 5 mm |
| REACh SVHC (Vibration test) | |
| Note (Packaging information) | For safe conductor connection, always adhere to a defined tightening torque. Particularly in the case of PCB terminal blocks with two or three positions, the individual solder pin for each contact point cannot compensate for this. That is why the terminal blocks must be supported during conductor connection (held with one hand, support on the housing). |
| eCl@ss 5.1 (Classifications) | 27261100 |
| eCl@ss 6.0 (Classifications) | 27261100 |
| eCl@ss 7.0 (Classifications) | 27440401 |
| eCl@ss 8.0 (Classifications) | 27440401 |
| eCl@ss 9.0 (Classifications) | 27440401 |
| Rated current (Pull-out test) | 24 A |
| Nom. voltage (Item properties) | 400 V |
| Torque (Electrical parameters) | 0.5 Nm ... 0.6 Nm |
| Pitch (Material data - housing) | 5 mm |
| Pin layout (Key Commercial Data) | Linear pinning |
| Specification (Electrical tests) | IEC 60664-1:2007-04 |
| pluggable (Electrical parameters) | Yes |
| Mounting type (Key Commercial Data) | Wave soldering |
| (Termination and connection method) | 2.5 mm² / flexible / > 50 N |
| Type of note (Packaging information) | Note on application |
| Dimension a (Material data - housing) | 10 mm |
| Rated voltage (III/2) (Pull-out test) | 400 V |
| Width [ w ] (Material data - housing) | 15 mm |
| Contact material (Connection capacity) | Cu alloy |
| Height [ h ] (Material data - housing) | 15.3 mm |
| Length [ l ] (Material data - housing) | 18 mm |
| Number of levels (Key Commercial Data) | 1 |
| Conductor cross section (Pull-out test) | 2.5 mm² |
| Connection method (Key Commercial Data) | Screw connection with tension sleeve |
| Range of articles (Key Commercial Data) | MKDSF 3 |
| Pin dimensions (Material data - housing) | 0.9 x 0.9 mm |
| Solder pin [P] (Material data - housing) | 4.1 mm |
| Stripping length (Electrical parameters) | 8 mm |
| Connection method (Electrical parameters) | Screw connection with tension sleeve |
| Number of positions (Key Commercial Data) | 3 |
| Hole diameter (Dimensions for the product) | 1.3 mm |
| Number of potentials (Key Commercial Data) | 3 |
| Number of connections (Key Commercial Data) | 3 |
| Rated surge voltage (III/2) (Pull-out test) | 4 kV |
| Dimensional drawing (Material data - housing) | |
| Insulating material (Material data - contact) | PA |
| Rated surge voltage (II/2) (Electrical tests) | 4 kV |
| Surface characteristics (Connection capacity) | Tin-plated |
| Type of packaging (Dimensions for PCB design) | packed in cardboard |
| Pieces per package (Dimensions for PCB design) | 50 |
| Rated surge voltage (III/2) (Electrical tests) | 4 kV |
| Rated surge voltage (III/3) (Electrical tests) | 4 kV |
| Result (Air clearances and creepage distances) | Test passed |
| Brief article description (Key Commercial Data) | PCB terminal block |
| Amplitude (Air clearances and creepage distances) | 0.35 mm (10 - 60.1 Hz) |
| Frequency (Air clearances and creepage distances) | 10 - 150 - 10 Hz |
| Pull-out test (Termination and connection method) | IEC 60999-1:1990-05 |
| Rated insulation voltage (II/2) (Electrical tests) | 630 V |
| Insulating material group (Material data - contact) | I |
| Rated insulation voltage (III/2) (Electrical tests) | 400 V |
| Rated insulation voltage (III/3) (Electrical tests) | 250 V |
| Sweep speed (Air clearances and creepage distances) | 1 octave/min |
| Acceleration (Air clearances and creepage distances) | 5 g (60.1 - 150 Hz) |
| CTI according to IEC 60112 (Material data - contact) | 600 |
| Clearances and creepage distances (Electrical tests) | IEC 60664-1:2007-04 |
| Conductor cross section solid (Electrical parameters) | 0.2 mm² ... 4 mm² |
| Height (without solder pin) (Material data - housing) | 11.2 mm |
| Specification (Air clearances and creepage distances) | IEC 60068-2-6:1982 + AMD 2:1985 |
| Denomination packing units (Dimensions for PCB design) | Pcs. |
| Conductor cross section flexible (Electrical parameters) | 0.2 mm² ... 2.5 mm² |
| Minimum creepage distance value (II/2) (Electrical tests) | 3.2 mm |
| Minimum creepage distance value (III/2) (Electrical tests) | 2 mm |
| Minimum creepage distance value (III/3) (Electrical tests) | 3.2 mm |
| Conductor cross section AWG / kcmil (Electrical parameters) | 24 ... 12 |
| Ambient temperature (assembly) (General product information) | -5 °C ... 100 °C |
| Ambient temperature (operation) (General product information) | -40 °C ... 100 °C (Depending on the current carrying capacity/derating curve) |
| Test for conductor damage and slackening (Ambient conditions) | IEC 60999-1:1990-05 |
| Metal surface soldering area (top layer) (Connection capacity) | Tin (5 - 7 µm Sn) |
| Metal surface terminal point (top layer) (Connection capacity) | Tin (5 - 7 µm Sn) |
| Test duration per axis (Air clearances and creepage distances) | 2.5 h |
| Flammability rating according to UL 94 (Material data - contact) | V0 |
| Metal surface soldering area (middle layer) (Connection capacity) | Nickel (2 - 3 µm Ni) |
| Metal surface terminal point (middle layer) (Connection capacity) | Nickel (2 - 3 µm Ni) |
| Minimum clearance - inhomogeneous field (II/2) (Electrical tests) | 3 mm |
| Minimum clearance - inhomogeneous field (III/2) (Electrical tests) | 3 mm |
| Minimum clearance - inhomogeneous field (III/3) (Electrical tests) | 3 mm |
| 2 conductors with same cross section, solid (Electrical parameters) | 0.2 mm² ... 1.5 mm² |
| Ambient temperature (storage/transport) (General product information) | -40 °C ... 70 °C |
| 2 conductors with same cross section, flexible (Electrical parameters) | 0.2 mm² ... 1.5 mm² |
| Glow wire flammability index GWFI according to EN 60695-2-12 (Material data - contact) | 850 |
| Glow wire ignition temperature GWIT according to EN 60695-2-13 (Material data - contact) | 775 |
| Conductor cross section / conductor type / tensile force (Termination and connection method) | 0.2 mm² / solid / > 10 N |
| Conductor cross section, flexible, with ferrule, with plastic sleeve (Electrical parameters) | 0.25 mm² ... 2.5 mm² |
| Temperature for the ball pressure test according to EN 60695-10-2 (Material data - contact) | 125 °C |
| Conductor cross section flexible, with ferrule without plastic sleeve (Electrical parameters) | 0.25 mm² ... 2.5 mm² |
| 2 conductors with same cross section, stranded, ferrules without plastic sleeve (Electrical parameters) | 0.25 mm² ... 0.75 mm² |
| 2 conductors with same cross section, stranded, with TWIN ferrules with plastic sleeve (Electrical parameters) | 0.5 mm² ... 1.5 mm² |
Product Description
Terminal block for printed circuit board, nominal current: 24 A, nominal voltage (III/2): 400 V, nominal section: 2.5 mm², number of potentials: 3, number of rows: 1, number of poles per row: 3, artic
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
