In Stock Hot Product
MKDS 3/ 3 BD:HSI,HSO
MKDS 3/ 3 BD:HSI,HSO 1788262 PHOENIX CONTACT PCB terminal block
$0.00USD
4485 in stock
Key Specifications
GTIN:4046356598873
Orderkey:1788262
Packing unit:1
Custom tariff number:85369010
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| GTIN | 4046356598873 |
| Orderkey | 1788262 |
| Packing unit | 1 |
| Custom tariff number | 85369010 |
| (Ambient conditions) | Test passed |
| Dry heat (Vibration test) | 168 h/100°C |
| Note (Connection capacity) | WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201 |
| Humid heat (Vibration test) | 48 h/30 °C/92 % |
| Pitch (Key Commercial Data) | 5 mm |
| (Standards and Regulations) | For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
| Note (Packaging information) | For safe conductor connection, always adhere to a defined tightening torque. Particularly in the case of PCB terminal blocks with two or three positions, the individual solder pin for each contact point cannot compensate for this. That is why the terminal blocks must be supported during conductor connection (held with one hand, support on the housing). |
| Test result (Vibration test) | Test passed |
| Rated current (Pull-out test) | 24 A |
| Torque (Electrical parameters) | 0.5 Nm ... 0.6 Nm |
| Pitch (Material data - housing) | 5 mm |
| Rated current (Item properties) | 24 A |
| Caption (Material data - housing) | Schematic representation – for additional information, see product range drawing in the Download Center |
| Mounting type (Key Commercial Data) | Wave soldering |
| Test specification (Vibration test) | IEC 60998-1:2002-12 |
| (Termination and connection method) | 2.5 mm² / flexible / > 50 N |
| Connection test (Ambient conditions) | IEC 60998-2-2:2002-12 |
| Type of note (Packaging information) | Note on application |
| China RoHS (Standards and Regulations) | Environmentally Friendly Use Period = 50 |
| Contact material (Connection capacity) | Cu alloy |
| Number of levels (Key Commercial Data) | 1 |
| Connection method (Key Commercial Data) | Screw connection with tension sleeve |
| Range of articles (Key Commercial Data) | MKDS 3 |
| Pin dimensions (Material data - housing) | 0.9 x 0.9 mm |
| Stripping length (Electrical parameters) | 8 mm |
| Number of positions (Key Commercial Data) | 3 |
| Number of potentials (Key Commercial Data) | 3 |
| Number of connections (Key Commercial Data) | 3 |
| Rated surge voltage (III/2) (Pull-out test) | 4 kV |
| Insulating material group (Electrical tests) | I |
| Dimensional drawing (Material data - housing) | |
| Insulating material (Material data - contact) | PA |
| Rated surge voltage (II/2) (Electrical tests) | 4 kV |
| Rated surge voltage (III/2) (Item properties) | 4 kV |
| Surface characteristics (Connection capacity) | Tin-plated |
| Rated surge voltage (III/2) (Electrical tests) | 4 kV |
| Rated surge voltage (III/3) (Electrical tests) | 4 kV |
| Type of packaging (Dimensions for the product) | packed in cardboard |
| Brief article description (Key Commercial Data) | PCB terminal block |
| Pieces per package (Dimensions for the product) | 50 |
| Dry heat (Air clearances and creepage distances) | 168 h/100°C |
| Rated insulation voltage (III/2) (Pull-out test) | 400 V |
| Pull-out test (Termination and connection method) | IEC 60998-2-1:2002-12 |
| Humid heat (Air clearances and creepage distances) | 48 h/30 °C/92 % |
| Rated insulation voltage (II/2) (Electrical tests) | 630 V |
| Rated insulation voltage (III/2) (Item properties) | 400 V |
| Insulating material group (Material data - contact) | I |
| Rated insulation voltage (III/2) (Electrical tests) | 400 V |
| Rated insulation voltage (III/3) (Electrical tests) | 250 V |
| Test result (Air clearances and creepage distances) | Test passed |
| CTI according to IEC 60112 (Material data - contact) | 600 |
| Conductor cross section solid (Electrical parameters) | 0.2 mm² ... 4 mm² |
| Denomination packing units (Dimensions for the product) | Pcs. |
| Conductor cross section flexible (Electrical parameters) | 0.2 mm² ... 2.5 mm² |
| Test specification (Air clearances and creepage distances) | IEC 60998-1:2002-12 |
| Conductor cross section AWG / kcmil (Electrical parameters) | 24 ... 12 |
| Ambient temperature (assembly) (General product information) | -5 °C ... 100 °C |
| Ambient temperature (operation) (General product information) | -40 °C (Depending on the current carrying capacity/derating curve) |
| Test for conductor damage and slackening (Ambient conditions) | IEC 60998-2-1:2002-12 |
| Metal surface soldering area (top layer) (Connection capacity) | Tin (4 - 8 µm Sn) |
| Metal surface terminal point (top layer) (Connection capacity) | Tin (4 - 8 µm Sn) |
| Flammability rating according to UL 94 (Material data - contact) | V0 |
| 2 conductors with same cross section, solid (Electrical parameters) | 0.2 mm² ... 1.5 mm² |
| Ambient temperature (storage/transport) (General product information) | -40 °C ... 70 °C |
| 2 conductors with same cross section, flexible (Electrical parameters) | 0.2 mm² ... 1.5 mm² |
| Glow wire flammability index GWFI according to EN 60695-2-12 (Material data - contact) | 850 |
| Glow wire ignition temperature GWIT according to EN 60695-2-13 (Material data - contact) | 775 |
| Connection in acc. with standard (Resistance to ageing, humidity and penetration of solids) | CUL |
| Temperature for the ball pressure test according to EN 60695-10-2 (Material data - contact) | 125 °C |
| Conductor cross section / conductor type / tensile force (Termination and connection method) | 0.2 mm² / solid / > 10 N |
| Conductor cross section, flexible, with ferrule, with plastic sleeve (Electrical parameters) | 0.25 mm² ... 2.5 mm² |
| Conductor cross section flexible, with ferrule without plastic sleeve (Electrical parameters) | 0.25 mm² ... 2.5 mm² |
| 2 conductors with same cross section, stranded, ferrules without plastic sleeve (Electrical parameters) | 0.25 mm² ... 0.75 mm² |
| 2 conductors with same cross section, stranded, with TWIN ferrules with plastic sleeve (Electrical parameters) | 0.5 mm² ... 1.5 mm² |
| Resistance to ageing, to humidity conditions, to ingress of solid objects and to harmful ingress of water (Air clearances and creepage distances) | Test passed IEC 60998-1:2002-12 168 h/100°C 48 h/30 °C/92 % |
Product Description
More details
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
