In Stock Hot Product
MKDS 3/ 2-5,08
MKDS 3/ 2-5,08 1711725 PHOENIX CONTACT PCB terminal block
$1.04USD
9660 in stock
Key Specifications
GTIN:4017918023713
Orderkey:1711725
Catalog page:Page 105 (C-1-2013)
Packing unit:100 pc
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| GTIN | 4017918023713 |
| Orderkey | 1711725 |
| Catalog page | Page 105 (C-1-2013) |
| Packing unit | 100 pc |
| Country of origin | DE (Germany) |
| Custom tariff number | 85369010 |
| (Ambient conditions) | Test passed |
| Minimum order quantity | 100 pc |
| Dry heat (Vibration test) | 168 h/100°C |
| Note (Connection capacity) | WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201 |
| Humid heat (Vibration test) | 48 h/30 °C/92 % |
| Pitch (Key Commercial Data) | 5.08 mm |
| (Standards and Regulations) | For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
| Note (Packaging information) | For safe conductor connection, always adhere to a defined tightening torque. Particularly in the case of PCB terminal blocks with two or three positions, the individual solder pin for each contact point cannot compensate for this. That is why the terminal blocks must be supported during conductor connection (held with one hand, support on the housing). |
| Test result (Vibration test) | Test passed |
| Rated current (Pull-out test) | 24 A |
| (General product information) | Following IEC 60068-2-54:2006-04 |
| Torque (Electrical parameters) | 0.5 Nm ... 0.6 Nm |
| Pitch (Material data - housing) | 5.08 mm |
| Rated current (Item properties) | 24 A |
| Pin layout (Key Commercial Data) | Linear pinning |
| Caption (Material data - housing) | Schematic representation – for additional information, see product range drawing in the Download Center |
| Screw thread (Key Commercial Data) | M3 |
| Mounting type (Key Commercial Data) | Wave soldering |
| Test specification (Vibration test) | IEC 60998-1:2002-12 |
| (Termination and connection method) | 2.5 mm² / flexible / > 50 N |
| Connection test (Ambient conditions) | IEC 60998-2-2:2002-12 |
| Type of note (Packaging information) | Note on application |
| Weight per Piece (excluding packing) | 3.960 g |
| Dimension a (Material data - housing) | 5.08 mm |
| Pin spacing (Material data - housing) | 15.24 mm |
| Process (General product information) | Wave soldering |
| Width [ w ] (Material data - housing) | 10.16 mm |
| China RoHS (Standards and Regulations) | Environmentally Friendly Use Period = 50 |
| Contact material (Connection capacity) | Cu alloy |
| Height [ h ] (Material data - housing) | 23 mm |
| Length [ l ] (Material data - housing) | 11.2 mm |
| Number of levels (Key Commercial Data) | 1 |
| Connection method (Key Commercial Data) | Screw connection with tension sleeve |
| Range of articles (Key Commercial Data) | MKDS 3 |
| Pin dimensions (Material data - housing) | 0.9 x 0.9 mm |
| Pin spacing (Dimensions for the product) | 15.24 mm |
| Solder pin [P] (Material data - housing) | 5 mm |
| Stripping length (Electrical parameters) | 8 mm |
| Number of positions (Key Commercial Data) | 2 |
| Hole diameter (Dimensions for the product) | 1.3 mm |
| Number of potentials (Key Commercial Data) | 2 |
| Drive form screw head (Key Commercial Data) | Slotted (L) |
| Number of connections (Key Commercial Data) | 2 |
| Rated surge voltage (III/2) (Pull-out test) | 4 kV |
| Specification (General product information) | Following IEC 61760-1:2006-04 |
| Insulating material group (Electrical tests) | I |
| Dimensional drawing (Material data - housing) | |
| Insulating material (Material data - contact) | PA |
| Rated surge voltage (II/2) (Electrical tests) | 4 kV |
| Rated surge voltage (III/2) (Item properties) | 4 kV |
| Surface characteristics (Connection capacity) | Tin-plated |
| Type of packaging (Dimensions for PCB design) | packed in cardboard |
| Pieces per package (Dimensions for PCB design) | 100 |
| Rated surge voltage (III/2) (Electrical tests) | 4 kV |
| Rated surge voltage (III/3) (Electrical tests) | 4 kV |
| Brief article description (Key Commercial Data) | PCB terminal block |
| Dry heat (Air clearances and creepage distances) | 168 h/100°C |
| Rated insulation voltage (III/2) (Pull-out test) | 400 V |
| Ambient temperature (assembly) (Processing notes) | -5 °C ... 100 °C |
| Pull-out test (Termination and connection method) | IEC 60998-2-1:2002-12 |
| Ambient temperature (operation) (Processing notes) | -40 °C (Depending on the current carrying capacity/derating curve) |
| Humid heat (Air clearances and creepage distances) | 48 h/30 °C/92 % |
| Rated insulation voltage (II/2) (Electrical tests) | 630 V |
| Rated insulation voltage (III/2) (Item properties) | 400 V |
| Insulating material group (Material data - contact) | I |
| Rated insulation voltage (III/2) (Electrical tests) | 400 V |
| Rated insulation voltage (III/3) (Electrical tests) | 250 V |
| Test result (Air clearances and creepage distances) | Test passed |
| CTI according to IEC 60112 (Material data - contact) | 600 |
| Conductor cross section solid (Electrical parameters) | 0.2 mm² ... 4 mm² |
| Height (without solder pin) (Material data - housing) | 18 mm |
| Denomination packing units (Dimensions for PCB design) | Pcs. |
| Conductor cross section flexible (Electrical parameters) | 0.2 mm² ... 2.5 mm² |
| Ambient temperature (storage/transport) (Processing notes) | -40 °C ... 70 °C |
| Test specification (Air clearances and creepage distances) | IEC 60998-1:2002-12 |
| (Resistance to ageing, humidity and penetration of solids) | CSA |
| Conductor cross section AWG / kcmil (Electrical parameters) | 24 ... 12 |
| Test for conductor damage and slackening (Ambient conditions) | IEC 60998-2-1:2002-12 |
| Metal surface soldering area (top layer) (Connection capacity) | Tin (4 - 8 µm Sn) |
| Metal surface terminal point (top layer) (Connection capacity) | Tin (4 - 8 µm Sn) |
| Flammability rating according to UL 94 (Material data - contact) | V0 |
| 2 conductors with same cross section, solid (Electrical parameters) | 0.2 mm² ... 1.5 mm² |
| 2 conductors with same cross section, flexible (Electrical parameters) | 0.2 mm² ... 1.5 mm² |
| Glow wire flammability index GWFI according to EN 60695-2-12 (Material data - contact) | 850 |
| Glow wire ignition temperature GWIT according to EN 60695-2-13 (Material data - contact) | 775 |
| Connection in acc. with standard (Resistance to ageing, humidity and penetration of solids) | EN-VDE |
| Temperature for the ball pressure test according to EN 60695-10-2 (Material data - contact) | 125 °C |
| Conductor cross section / conductor type / tensile force (Termination and connection method) | 0.2 mm² / solid / > 10 N |
| Conductor cross section, flexible, with ferrule, with plastic sleeve (Electrical parameters) | 0.25 mm² ... 2.5 mm² |
| Conductor cross section flexible, with ferrule without plastic sleeve (Electrical parameters) | 0.25 mm² ... 2.5 mm² |
| Flammability rating according to UL 94 (Resistance to ageing, humidity and penetration of solids) | V0 |
| 2 conductors with same cross section, stranded, ferrules without plastic sleeve (Electrical parameters) | 0.25 mm² ... 0.75 mm² |
| 2 conductors with same cross section, stranded, with TWIN ferrules with plastic sleeve (Electrical parameters) | 0.5 mm² ... 1.5 mm² |
| Resistance to ageing, to humidity conditions, to ingress of solid objects and to harmful ingress of water (Air clearances and creepage distances) | Test passed IEC 60998-1:2002-12 168 h/100°C 48 h/30 °C/92 % |
Product Description
Terminal block for printed circuit board, nominal current: 24 A, nominal voltage (III/2): 400 V, nominal cross-section: 2.5 mm², number of potentials: 2, number of rows: 1, number of poles per row: 2,
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
