In Stock Hot Product
MKDS 3/ 2-5,08 RD H1L
MKDS 3/ 2-5,08 RD H1L 1097565 PHOENIX CONTACT PCB terminal block, nominal current: 24 A, rated voltage (III/..
$0.00USD
4452 in stock
Key Specifications
GTIN:4055626938783
Orderkey:1097565
(Drawings):
Packing unit:1
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| GTIN | 4055626938783 |
| Orderkey | 1097565 |
| (Drawings) | |
| Packing unit | 1 |
| Pitch (Drawings) | 5.08 mm |
| ETIM 5.0 (eCl@ss) | EC002643 |
| ETIM 6.0 (eCl@ss) | EC002643 |
| ETIM 7.0 (eCl@ss) | EC002643 |
| Custom tariff number | 85369010 |
| (Ambient conditions) | Test passed |
| Pin layout (Drawings) | Linear pinning |
| Mounting type (Drawings) | Wave soldering |
| Dry heat (Vibration test) | 168 h/100°C |
| Note (Connection capacity) | WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201 |
| Humid heat (Vibration test) | 48 h/30 °C/92 % |
| Number of levels (Drawings) | 1 |
| Connection method (Drawings) | Screw connection with tension sleeve |
| Note (Packaging information) | For safe conductor connection, always adhere to a defined tightening torque. Particularly in the case of PCB terminal blocks with two or three positions, the individual solder pin for each contact point cannot compensate for this. That is why the terminal blocks must be supported during conductor connection (held with one hand, support on the housing). |
| Range of articles (Drawings) | MKDS 3 |
| eCl@ss 8.0 (Classifications) | 27440401 |
| eCl@ss 9.0 (Classifications) | 27440401 |
| Rated current (Pull-out test) | 24 A |
| Nom. voltage (Item properties) | 400 V |
| Number of positions (Drawings) | 2 |
| Torque (Electrical parameters) | 0.5 Nm ... 0.6 Nm |
| Pitch (Material data - housing) | 5.08 mm |
| Drive form screw head (Drawings) | Slotted (L) |
| Specification (Electrical tests) | IEC 60947-1:2007-06 + A1:2010-12 + A2:2014-09 |
| Caption (Material data - housing) | Schematic representation – for additional information, see product range drawing in the Download Center |
| pluggable (Electrical parameters) | Yes |
| (Termination and connection method) | 2.5 mm² / flexible / > 50 N |
| Brief article description (Drawings) | PCB terminal block |
| Connection test (Ambient conditions) | IEC 60998-2-2:2002-12 |
| Type of note (Packaging information) | Note on application |
| Dimension a (Material data - housing) | 5.08 mm |
| Pin spacing (Material data - housing) | 15.24 mm |
| Rated voltage (III/2) (Pull-out test) | 400 V |
| Width [ w ] (Material data - housing) | 10.16 mm |
| Contact material (Connection capacity) | Cu alloy |
| Height [ h ] (Material data - housing) | 23 mm |
| Length [ l ] (Material data - housing) | 11.2 mm |
| Conductor cross section (Pull-out test) | 2.5 mm² |
| Pin dimensions (Material data - housing) | 0.9 x 0.9 mm |
| Pin spacing (Dimensions for the product) | 15.24 mm |
| Solder pin [P] (Material data - housing) | 5 mm |
| Stripping length (Electrical parameters) | 8 mm |
| Connection method (Electrical parameters) | Screw connection with tension sleeve |
| Hole diameter (Dimensions for the product) | 1.3 mm |
| Rated surge voltage (III/2) (Pull-out test) | 4 kV |
| Dimensional drawing (Material data - housing) | |
| Insulating material (Material data - contact) | PA |
| Rated surge voltage (II/2) (Electrical tests) | 4 kV |
| Surface characteristics (Connection capacity) | Tin-plated |
| Type of packaging (Dimensions for PCB design) | packed in cardboard |
| Pieces per package (Dimensions for PCB design) | 100 |
| Rated surge voltage (III/2) (Electrical tests) | 4 kV |
| Rated surge voltage (III/3) (Electrical tests) | 4 kV |
| Result (Air clearances and creepage distances) | Test passed |
| Amplitude (Air clearances and creepage distances) | 0.35 mm (10 - 60.1 Hz) |
| Frequency (Air clearances and creepage distances) | 10 - 150 - 10 Hz |
| Pull-out test (Termination and connection method) | IEC 60998-2-1:2002-12 |
| Rated insulation voltage (II/2) (Electrical tests) | 630 V |
| Insulating material group (Material data - contact) | I |
| Note on connection cross section (Electrical tests) | With connected conductor 4 mm² (solid). |
| Rated insulation voltage (III/2) (Electrical tests) | 400 V |
| Rated insulation voltage (III/3) (Electrical tests) | 250 V |
| Sweep speed (Air clearances and creepage distances) | 1 octave/min |
| Acceleration (Air clearances and creepage distances) | 5 g (60.1 - 150 Hz) |
| CTI according to IEC 60112 (Material data - contact) | 600 |
| Clearances and creepage distances (Electrical tests) | IEC 60947-1:2007-06 + A1:2010-12 + A2:2014-09 |
| Conductor cross section solid (Electrical parameters) | 0.2 mm² ... 4 mm² |
| Height (without solder pin) (Material data - housing) | 18 mm |
| Specification (Air clearances and creepage distances) | IEC 60068-2-6:1995-03 |
| Denomination packing units (Dimensions for PCB design) | Pcs. |
| Conductor cross section flexible (Electrical parameters) | 0.2 mm² ... 2.5 mm² |
| Minimum creepage distance value (II/2) (Electrical tests) | 3.2 mm |
| Minimum creepage distance value (III/2) (Electrical tests) | 2 mm |
| Minimum creepage distance value (III/3) (Electrical tests) | 3.2 mm |
| Conductor cross section AWG / kcmil (Electrical parameters) | 24 ... 12 |
| Ambient temperature (assembly) (General product information) | -5 °C ... 100 °C |
| Ambient temperature (operation) (General product information) | -40 °C ... 100 °C (Depending on the current carrying capacity/derating curve) |
| Test for conductor damage and slackening (Ambient conditions) | IEC 60998-2-1:2002-12 |
| Metal surface soldering area (top layer) (Connection capacity) | Tin (4 - 8 µm Sn) |
| Metal surface terminal point (top layer) (Connection capacity) | Tin (4 - 8 µm Sn) |
| Test duration per axis (Air clearances and creepage distances) | 2.5 h |
| Flammability rating according to UL 94 (Material data - contact) | V0 |
| Minimum clearance - inhomogeneous field (II/2) (Electrical tests) | 3 mm |
| Minimum clearance - inhomogeneous field (III/2) (Electrical tests) | 3 mm |
| Minimum clearance - inhomogeneous field (III/3) (Electrical tests) | 3 mm |
| 2 conductors with same cross section, solid (Electrical parameters) | 0.2 mm² ... 1.5 mm² |
| Ambient temperature (storage/transport) (General product information) | -40 °C ... 70 °C |
| 2 conductors with same cross section, flexible (Electrical parameters) | 0.2 mm² ... 1.5 mm² |
| Glow wire flammability index GWFI according to EN 60695-2-12 (Material data - contact) | 850 |
| Glow wire ignition temperature GWIT according to EN 60695-2-13 (Material data - contact) | 775 |
| Conductor cross section / conductor type / tensile force (Termination and connection method) | 0.2 mm² / solid / > 10 N |
| Conductor cross section, flexible, with ferrule, with plastic sleeve (Electrical parameters) | 0.25 mm² ... 2.5 mm² |
| Temperature for the ball pressure test according to EN 60695-10-2 (Material data - contact) | 125 °C |
| Conductor cross section flexible, with ferrule without plastic sleeve (Electrical parameters) | 0.25 mm² ... 2.5 mm² |
| 2 conductors with same cross section, stranded, ferrules without plastic sleeve (Electrical parameters) | 0.25 mm² ... 0.75 mm² |
| 2 conductors with same cross section, stranded, with TWIN ferrules with plastic sleeve (Electrical parameters) | 0.5 mm² ... 1.5 mm² |
Product Description
Terminal block for printed circuit board, rated current: 24 A, dimensioning voltage (III/2): 400 V, nominal cross-section: 2.5 mm², Number of rows: 1, Number of poles per row: 2, article family: MKDS
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Technical Details
DiagramType: MKDS 3/2 and MKDS 3/3Test following DIN EN 60512-5-2:2003-01Reduction factor = 1No. of positions: 5
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
