In Stock Hot Product
MKDS 1,5/ 3 BD:10-12
MKDS 1,5/ 3 BD:10-12 1702106 PHOENIX CONTACT PCB terminal block
$0.00USD
3258 in stock
Key Specifications
GTIN:4046356571296
Orderkey:1702106
Packing unit:1
Custom tariff number:85369010
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| GTIN | 4046356571296 |
| Orderkey | 1702106 |
| Packing unit | 1 |
| Custom tariff number | 85369010 |
| (Ambient conditions) | Test passed |
| Dry heat (Vibration test) | 168 h/100°C |
| Note (Connection capacity) | WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201 |
| Voltage (Electrical tests) | 250 V |
| Humid heat (Vibration test) | 48 h/30 °C/92 % |
| Pitch (Key Commercial Data) | 5 mm |
| (Standards and Regulations) | For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
| Note (Packaging information) | For safe conductor connection, always adhere to a defined tightening torque. Particularly in the case of PCB terminal blocks with two or three positions, the individual solder pin for each contact point cannot compensate for this. That is why the terminal blocks must be supported during conductor connection (held with one hand, support on the housing). |
| Test result (Vibration test) | Test passed |
| Rated current (Pull-out test) | 17.5 A |
| Torque (Electrical parameters) | 0.5 Nm ... 0.6 Nm |
| Pitch (Material data - housing) | 5 mm |
| Rated current (Item properties) | 17.5 A |
| Pin layout (Key Commercial Data) | Linear pinning |
| Caption (Material data - housing) | Schematic representation – for additional information, see product range drawing in the Download Center |
| Screw thread (Key Commercial Data) | M3 |
| Mounting type (Key Commercial Data) | Wave soldering |
| Test specification (Vibration test) | IEC 60998-2-1:1990-04 |
| (Termination and connection method) | 1.5 mm² / flexible / > 40 N |
| Type of note (Packaging information) | Note on application |
| Dimension a (Material data - housing) | 10 mm |
| Pin spacing (Material data - housing) | 5 mm |
| Width [ w ] (Material data - housing) | 15 mm |
| China RoHS (Standards and Regulations) | Environmentally Friendly Use Period = 50 |
| Contact material (Connection capacity) | Cu alloy |
| Height [ h ] (Material data - housing) | 17.3 mm |
| Length [ l ] (Material data - housing) | 9.8 mm |
| Number of levels (Key Commercial Data) | 1 |
| REACh SVHC (Standards and Regulations) | Lead 7439-92-1 |
| Connection method (Key Commercial Data) | Screw connection with tension sleeve |
| Range of articles (Key Commercial Data) | MKDS 1,5 |
| Pin dimensions (Material data - housing) | 0.9 x 0.9 mm |
| Pin spacing (Dimensions for the product) | 5 mm |
| Solder pin [P] (Material data - housing) | 3.5 mm |
| Stripping length (Electrical parameters) | 7 mm |
| Number of positions (Key Commercial Data) | 3 |
| Hole diameter (Dimensions for the product) | 1.3 mm |
| Number of potentials (Key Commercial Data) | 3 |
| Drive form screw head (Key Commercial Data) | Slotted (L) |
| Number of connections (Key Commercial Data) | 3 |
| Rated surge voltage (III/2) (Pull-out test) | 4 kV |
| Insulating material group (Electrical tests) | I |
| Dimensional drawing (Material data - housing) | |
| Insulating material (Material data - contact) | PA |
| Rated surge voltage (II/2) (Electrical tests) | 4 kV |
| Rated surge voltage (III/2) (Item properties) | 4 kV |
| Surface characteristics (Connection capacity) | Tin-plated |
| Type of packaging (Dimensions for PCB design) | packed in cardboard |
| Pieces per package (Dimensions for PCB design) | 50 |
| Rated surge voltage (III/2) (Electrical tests) | 4 kV |
| Rated surge voltage (III/3) (Electrical tests) | 4 kV |
| Brief article description (Key Commercial Data) | PCB terminal block |
| Dry heat (Air clearances and creepage distances) | 168 h/100°C |
| Rated insulation voltage (III/2) (Pull-out test) | 400 V |
| Pull-out test (Termination and connection method) | IEC 60998-2-1:1990-04 |
| Humid heat (Air clearances and creepage distances) | 48 h/30 °C/92 % |
| Rated insulation voltage (II/2) (Electrical tests) | 630 V |
| Rated insulation voltage (III/2) (Item properties) | 400 V |
| Insulating material group (Material data - contact) | I |
| Rated insulation voltage (III/2) (Electrical tests) | 400 V |
| Rated insulation voltage (III/3) (Electrical tests) | 250 V |
| Test result (Air clearances and creepage distances) | Test passed |
| CTI according to IEC 60112 (Material data - contact) | 600 |
| Conductor cross section solid (Electrical parameters) | 0.14 mm² ... 2.5 mm² |
| Height (without solder pin) (Material data - housing) | 13.8 mm |
| Denomination packing units (Dimensions for PCB design) | Pcs. |
| Conductor cross section flexible (Electrical parameters) | 0.14 mm² ... 1.5 mm² |
| Test specification (Air clearances and creepage distances) | IEC 60998-2-1:1990-04 |
| (Resistance to ageing, humidity and penetration of solids) | CSA |
| Conductor cross section AWG / kcmil (Electrical parameters) | 26 ... 14 |
| Ambient temperature (assembly) (General product information) | -5 °C ... 100 °C |
| Ambient temperature (operation) (General product information) | -40 °C |
| Test for conductor damage and slackening (Ambient conditions) | IEC 60998-2-1:1990-04 |
| Metal surface soldering area (top layer) (Connection capacity) | Tin (4 - 8 µm Sn) |
| Metal surface terminal point (top layer) (Connection capacity) | Tin (4 - 8 µm Sn) |
| Flammability rating according to UL 94 (Material data - contact) | V0 |
| 2 conductors with same cross section, solid (Electrical parameters) | 0.14 mm² ... 1 mm² |
| Ambient temperature (storage/transport) (General product information) | -40 °C ... 70 °C |
| 2 conductors with same cross section, flexible (Electrical parameters) | 0.14 mm² ... 0.75 mm² |
| Glow wire flammability index GWFI according to EN 60695-2-12 (Material data - contact) | 850 |
| Glow wire ignition temperature GWIT according to EN 60695-2-13 (Material data - contact) | 775 |
| Connection in acc. with standard (Resistance to ageing, humidity and penetration of solids) | EN-VDE |
| Temperature for the ball pressure test according to EN 60695-10-2 (Material data - contact) | 125 °C |
| Conductor cross section / conductor type / tensile force (Termination and connection method) | 0.14 mm² / solid / > 10 N |
| Conductor cross section, flexible, with ferrule, with plastic sleeve (Electrical parameters) | 0.25 mm² ... 1.5 mm² |
| Conductor cross section flexible, with ferrule without plastic sleeve (Electrical parameters) | 0.25 mm² ... 1.5 mm² |
| 2 conductors with same cross section, stranded, ferrules without plastic sleeve (Electrical parameters) | 0.25 mm² ... 0.5 mm² |
| 2 conductors with same cross section, stranded, with TWIN ferrules with plastic sleeve (Electrical parameters) | 0.5 mm² ... 1 mm² |
| Resistance to ageing, to humidity conditions, to ingress of solid objects and to harmful ingress of water (Air clearances and creepage distances) | Test passed IEC 60998-2-1:1990-04 168 h/100°C 48 h/30 °C/92 % |
Product Description
Terminal block for printed circuit board, rated current: 17.5 A, dimensioning voltage (III/2): 400 V, nominal section: 1.5 mm², Number of potentials: 3, Number of rows: 1, Number of poles per row: 3,
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
