In Stock Hot Product
MINI MCR-SL-UI-UI-NC
MINI MCR-SL-UI-UI-NC 2864150 PHOENIX CONTACT 3-way isolating amplifier for the electrical isolation of analo..
$0.00USD
4284 in stock
Key Specifications
:0 V ... 5 V
GL:GL EMC 2 D
ATEX:Ex II 3 G Ex nA IIC T4 Gc X
Color:green
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| 0 V ... 5 V | |
| GL | GL EMC 2 D |
| ATEX | Ex II 3 G Ex nA IIC T4 Gc X |
| Color | green |
| Depth | 102.5 mm |
| Width | 6.2 mm |
| Height | 93.1 mm |
| Conformance | CE-compliant |
| Designation | Electromagnetic RF field |
| Screw thread | M3 |
| Noise emission | EN 61000-6-4 |
| Noise immunity | EN 61000-6-2 When being exposed to interference, there may be minimal deviations. |
| No. of channels | 1 |
| Housing material | PBT |
| Number of inputs | 1 |
| Pollution degree | 2 |
| Stripping length | 12 mm |
| UL, USA / Canada | UL 508 Recognized |
| Connection method | Screw connection |
| Mounting position | any |
| Number of outputs | 1 |
| Power consumption | < 450 mW (Current output) |
| Max. input current | 50 mA |
| Max. input voltage | 30 V |
| Protective circuit | Transient protection |
| Max. output current | 28 mA |
| Max. output voltage | approx. 12.5 V |
| Current input signal | 0 mA ... 20 mA |
| Degree of protection | IP20 |
| Electrical isolation | Basic insulation according to EN 61010 |
| Overvoltage category | II |
| Supply voltage range | 19.2 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715)) |
| Voltage input signal | 0 V ... 10 V |
| Assembly instructions | The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715. |
| Current output signal | 0 mA ... 20 mA (please indicate if different setting when ordering) |
| Short-circuit current | approx. 22 mA |
| Standards/regulations | EN 61000-4-3 |
| Voltage output signal | 0 V ... 10 V |
| Limit frequency (3 dB) | approx. 100 Hz |
| Nominal supply voltage | 24 V DC |
| Step response (10-90%) | approx. 3.2 ms |
| Max. current consumption | < 19 mA (Current output, at 24 V DC incl. load) |
| Rated insulation voltage | 50 V AC/DC |
| Configurable/programmable | Yes, unconfigured |
| Maximum transmission error | ≤ 0.1 % (of final value) |
| Electromagnetic compatibility | Conformance with EMC Directive 2004/108/EC |
| Input resistance current input | approx. 50 Ω |
| Ambient temperature (operation) | -20 °C ... 65 °C |
| Load/output load current output | < 500 Ω (at 20 mA) |
| Load/output load voltage output | ≥ 10 kΩ |
| Maximum temperature coefficient | < 0.01 %/K |
| Conductor cross section AWG max. | 12 |
| Conductor cross section AWG min. | 26 |
| Temperature coefficient, typical | < 0.002 %/K |
| Input resistance of voltage input | approx. 100 kΩ |
| Test voltage, input/output/supply | 1.5 kV (50 Hz, 1 min.) |
| Conductor cross section solid max. | 2.5 mm² |
| Conductor cross section solid min. | 0.2 mm² |
| Conductor cross section flexible max. | 2.5 mm² |
| Conductor cross section flexible min. | 0.2 mm² |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Typical deviation from the measuring range final value | 5 % |
Product Description
3-way separation amplifier for galvanic separation of analog signals, input/output configurable via DIP switch, screw connection, standard configuration
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
