In Stock Hot Product
MINI MCR-SL-UI-I-LP-NC
MINI MCR-SL-UI-I-LP-NC 2902829 PHOENIX CONTACT 2-way loop-powered isolating amplifier (supplied on the outpu..
$0.00USD
3028 in stock
Key Specifications
:0 mV ... 750 mV
ATEX:Ex II 3 G Ex nA IIC T4 Gc X
Color:green
Depth:102.5 mm
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| 0 mV ... 750 mV | |
| ATEX | Ex II 3 G Ex nA IIC T4 Gc X |
| Color | green |
| Depth | 102.5 mm |
| Width | 6.2 mm |
| Height | 93.1 mm |
| Conformance | CE-compliant |
| Designation | Electromagnetic RF field |
| Screw thread | M3 |
| Alignment span | ± 2 % |
| Alignment zero | ± 2 % |
| Noise emission | EN 61000-6-4 |
| Noise immunity | EN 61000-6-2 When being exposed to interference, there may be minimal deviations. |
| No. of channels | 1 |
| Housing material | PBT |
| Number of inputs | 1 |
| Pollution degree | 2 |
| Stripping length | 12 mm |
| UL, USA / Canada | UL 508 Listed |
| Connection method | Screw connection |
| Mounting position | any |
| Number of outputs | 1 |
| Power consumption | 28 mW (without signal) |
| Max. input current | < 50 mA (Dielectric strength up to 30 V) |
| Max. input voltage | < 40 V |
| Max. output current | 35 mA (output limit) |
| Current input signal | 0 mA ... 40 mA |
| Degree of protection | IP20 |
| Electrical isolation | Basic insulation according to EN 61010 |
| Overvoltage category | II |
| Supply voltage range | no separate supply voltage necessary |
| Voltage input signal | 0 mV ... 1000 mV |
| Current output signal | 4 mA ... 20 mA |
| Standards/regulations | EN 61000-4-3 |
| Limit frequency (3 dB) | approx. 30 Hz |
| Step response (10-90%) | approx. 16 ms |
| Rated insulation voltage | 50 V AC/DC |
| Configurable/programmable | Yes, preconfigured |
| Test voltage input/output | 1.5 kV (50 Hz, 1 min.) |
| Maximum transmission error | < 0.1 % (of final value) |
| Certificate of classification | DNV GL 14085-15HH |
| Electromagnetic compatibility | Conformance with EMC Directive 2004/108/EC |
| Input resistance current input | ≤ 50 Ω |
| Ambient temperature (operation) | -25 °C ... 70 °C |
| Load/output load current output | (UB- 8 V) / 22 mA |
| Maximum temperature coefficient | 0.01 %/K |
| Conductor cross section AWG max. | 12 |
| Conductor cross section AWG min. | 26 |
| Temperature coefficient, typical | 0.005 %/K |
| Input resistance of voltage input | approx. 100 kΩ (At ≤ 1 V, otherwise approximately 1 MΩ) |
| Conductor cross section solid max. | 2.5 mm² |
| Conductor cross section solid min. | 0.2 mm² |
| Conductor cross section flexible max. | 2.5 mm² |
| Conductor cross section flexible min. | 0.2 mm² |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Typical deviation from the measuring range final value | 0.5 % |
Product Description
Loop-powered 2-way separation amplifiers powered by the output side, configurable with a DIP switch, with screw connection technology, standard configuration.
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Technical Details
The 6.2 mm wide MINI MCR-SL-UI-I-LP... configurable 2-way isolating amplifier is used to electrically isolate, condition, and filter analog signals.
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
