In Stock Hot Product
MINI MCR-SL-RPS-I-I
MINI MCR-SL-RPS-I-I 2864422 PHOENIX CONTACT Repeater power supply
$0.00USD
4053 in stock
Key Specifications
:208 mW (24 V DC)
EMC:A
Note:When being exposed to interference, there may be minimal deviations.
Color:green (RAL 6021)
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| 208 mW (24 V DC) | |
| EMC | A |
| Note | When being exposed to interference, there may be minimal deviations. |
| Color | green (RAL 6021) |
| Depth | 101.2 mm |
| Width | 6.2 mm |
| Height | 93.1 mm |
| Ripple | < 20 mVrms(at 500 Ω) |
| Altitude | ≤ 2000 m |
| Comments | Safety measures must be taken to prevent electrostatic discharge. |
| EMC note | EMC: class A product, see manufacturer's declaration in the download area |
| Humidity | B |
| Enclosure | Required protection according to the Rules shall be provided upon installation on board |
| Vibration | B |
| Insulation | Basic insulation in accordance with IEC/EN 61010 |
| Certificate | CE-compliant |
| Designation | Electromagnetic RF field |
| Temperature | B |
| Product type | Repeater power supply |
| Screw thread | M3 |
| Test voltage | 1.5 kV AC (50 Hz, 60 s) |
| Assembly note | The DIN rail connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, item no. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail in accordance with EN 60715. |
| Mounting type | DIN rail mounting |
| Identification | UL 508 Recognized |
| Noise emission | EN 61000-6-4 |
| Noise immunity | EN 61000-6-2 |
| Product family | MINI Analog |
| No. of channels | 1 |
| Article revision | 16 |
| Housing material | PBT |
| Non-load voltage | approx. 12.5 V |
| Number of inputs | 1 |
| Pollution degree | 2 |
| Stripping length | 12 mm |
| Connection method | Screw connection |
| Mounting position | any |
| Number of outputs | 1 |
| Power consumption | < 900 mW (at 24 V DC and in repeater power supply operation) |
| Protective circuit | Transient protection |
| Dimensional drawing | |
| Current input signal | 0 mA ... 20 mA (isolator operation) |
| Degree of protection | IP20 |
| Electrical isolation | 3-way isolation |
| Overvoltage category | II |
| Supply voltage range | 19.2 V DC ... 30 V DC (The DIN rail connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, item no. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail in accordance with EN 60715) |
| Current output signal | 0 mA ... 20 mA (isolator operation) |
| Standards/regulations | EN 61000-4-2 |
| Limit frequency (3 dB) | approx. 100 Hz |
| Nominal supply voltage | 24 V DC |
| Step response (10-90%) | 3.5 ms |
| Description of the input | Sensor circuit |
| Rated insulation voltage | 50 V AC/DC |
| Max. current input signal | 28 mA |
| Max. current output signal | 28 mA |
| Maximum transmission error | ≤ 0.2 % (of final value) |
| Transmitter supply voltage | UB- max. 4.5 V for load 0 mA ... 20 mA |
| Conductor cross section AWG | 26 ... 12 |
| Transmission error, typical | ≤ 0.1 % (of final value) |
| Signal transmission behavior | In = Out |
| Conductor cross section rigid | 0.2 mm² ... 2.5 mm² |
| Electromagnetic compatibility | Conformance with EMC directive |
| Input resistance current input | approx. 50 Ω |
| Ambient temperature (operation) | -20 °C ... 60 °C |
| Load/output load current output | ≤ 500 Ω (I = 20 mA) |
| Maximum temperature coefficient | < 0.01 %/K |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Permissible humidity (operation) | 5 % ... 95 % (non-condensing) |
| Temperature coefficient, typical | < 0.002 %/K |
| Transmitter supply voltage range | 14.7 V DC ... 25.5 V DC |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Electrical isolation between input and output | yes |
| Maximum power dissipation for nominal condition | 508 mW (24 V DC) |
| Fire protection for rail vehicles (DIN EN 45545-2) R22 | HL 1 - HL 2 |
| Fire protection for rail vehicles (DIN EN 45545-2) R23 | HL 1 - HL 2 |
| Fire protection for rail vehicles (DIN EN 45545-2) R24 | HL 1 - HL 2 |
| Typical deviation from the measuring range final value | 10 % |
Product Description
MCR feeder separator, with screw connection, input signal: (0)4..20 mA, output signal: (0)4..20 mA
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
