In Stock Hot Product
MINI MCR-EX-IDS-I-I
MCR-EX-IDS-I-I 2908805 PHOENIX CONTACT MINI Analog Signal Conditioner SIL 2
$416.36USD
58 in stock
Key Specifications
:4 mA ... 20 mA (SIL)
Note:Single-channel
Color:gray (RAL 7042)
Depth:119.2 mm
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| 4 mA ... 20 mA (SIL) | |
| Note | Single-channel |
| Color | gray (RAL 7042) |
| Depth | 119.2 mm |
| Width | 6.2 mm |
| Height | 109.81 mm |
| Insulation | Double/reinforced insulation |
| Certificate | CE-compliant |
| Height range | > 2000 m ... 3000 m |
| Product type | Output signal conditioner |
| Screw thread | M3 |
| Test voltage | 2.5 kV AC (50 Hz, 60 s) |
| Voltage drop | < 3.5 V DC (20 mA) |
| Configuration | DIP switches |
| Input current | ≤ 30 mA |
| Mounting type | DIN rail mounting |
| Output ripple | 20 mV (rms) |
| Identification | II (1) G [Ex ia Ga] IIC |
| Noise emission | EN 61000-6-4 |
| Noise immunity | EN 61000-6-2 |
| Product family | MINI Analog Pro |
| Status display | Green LED (supply voltage) |
| Article revision | 03 |
| Housing material | PBT |
| Non-load voltage | ≤ 27 V DC |
| Number of inputs | 1 |
| Pollution degree | 2 (≤ 5000 m) |
| Stripping length | 10 mm |
| Connection method | Screw connection |
| Mounting position | any |
| Number of outputs | 1 |
| Power consumption | ≤ 1.2 W |
| Shock (operation) | 15g (DIN EN 60068-2-27) |
| Tightening torque | 0.5 Nm ... 0.6 Nm |
| Output description | intrinsically safe |
| Ex i circuits (EPL) | Ga |
| Protocols supported | HART-transparent |
| Short-circuit-proof | yes |
| Current input signal | 0 mA ... 20 mA |
| Line fault detection | > 10 kΩ (Line break) |
| Max. output power Po | 647 mW |
| Overvoltage category | II (≤ 5000 m) |
| Supply voltage range | 19.2 V DC ... 30 V DC |
| Current output signal | 0 mA ... 20 mA |
| Ex installation (EPL) | Gc |
| Low Voltage Directive | Conformance with Low Voltage Directive |
| Standards/regulations | IEC/EN 61010-1 |
| Vibration (operation) | 5g (DIN EN 60068-2-6) |
| Max. output current Io | 98 mA |
| Max. output voltage Uo | 26.4 V |
| Nominal supply voltage | 24 V DC |
| Step response (10-90%) | ≤ 10 ms |
| Rated insulation voltage | 300 Vrms |
| Maximum transmission error | 0.1 % |
| Conductor cross section AWG | 24 ... 12 (flexible) |
| Max. internal inductance Li | negligible |
| Max. internal capacitance Ci | 7 nF |
| Signal transmission behavior | In = Out |
| Conductor cross section rigid | 0.2 mm² ... 1.5 mm² (with ferrule) |
| Electromagnetic compatibility | Tested in accordance with the following standards and regulations: EN 61326-1 For industrial use, NAMUR NE 21 |
| Ambient temperature (operation) | -40 °C ... 70 °C (Any mounting position) |
| Load/output load current output | ≤ 700 Ω (20 mA) |
| Maximum temperature coefficient | ≤ 0.01 % |
| Conductor cross section flexible | 0.14 mm² ... 2.5 mm² |
| Permissible humidity (operation) | 5 % ... 95 % (at 25 °C, non-condensing) |
| Safety-related maximum voltage Um | 253 V AC |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| IIC (mixed circuit): Max. external inductivity Lo/ Max. external capacitance Co | 1.4 mH / 42 nF, 1 mH / 49 nF, 500 µH / 66 nF, 200 µH / 89 nF |
| IIC (simple circuit): Max. external inductivity Lo/ Max. external capacitance Co | 2 mH / 89 nF |
| IIA/I (mixed circuit): Max. external inductivity Lo/ Max. external capacitance Co | 10 mH / 493 nF, 1 mH / 553 nF, 500 µH / 653 nF, 200 µH / 833 nF, 100 µH / 993 nF |
| IIA/I (simple circuit): Max. external inductivity Lo/ Max. external capacitance Co | 10 mH / 2.48 µF |
| IIB/III (mixed circuit): Max. external inductivity Lo/ Max. external capacitance Co | 4 mH / 303 nF, 1 mH / 383 nF, 500 µH / 463 nF, 200 µH / 613 nF, 100 µH / 733 nF |
| IIB/III (simple circuit): Max. external inductivity Lo/ Max. external capacitance Co | 4 mH / 730 nF |
Product Description
Ex i-Output signal conditioner for isolating and transmitting 0 mA / 4 mA ... 20 mA signals from the controller to an intrinsically safe load in the Ex area. HART-transparent, no-load voltage: 27 V DC
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
