In Stock Hot Product
MINI MCR-2-UI-UI
MINI MCR-2-UI-UI 2902037 PHOENIX CONTACT 3-way signal conditioner with plug-in connection technology and cal..
$0.00USD
3914 in stock
Key Specifications
:1 V ... 5 V (via DIP switch)
ATEX:Ex II 3 G Ex nA IIC T4 Gc X
Color:gray
Depth:120.5 mm
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| 1 V ... 5 V (via DIP switch) | |
| ATEX | Ex II 3 G Ex nA IIC T4 Gc X |
| Color | gray |
| Depth | 120.5 mm |
| Width | 6.2 mm |
| Height | 110.5 mm |
| Conformance | CE-compliant |
| Designation | Electromagnetic RF field |
| Screw thread | M3 |
| Noise emission | EN 61000-6-4 |
| Noise immunity | EN 61000-6-2 When being exposed to interference, there may be minimal deviations. |
| No. of channels | 1 |
| Housing material | PBT |
| Number of inputs | 1 |
| Pollution degree | 2 |
| Stripping length | 10 mm |
| UL, USA / Canada | UL 508 Listed |
| Connection method | Screw connection |
| Mounting position | any |
| Number of outputs | 1 |
| Power consumption | ≤ 800 mW (at IOUT= 20 mA, 9.6 V DC, 600 Ω load) |
| Max. input current | 24 mA |
| Max. input voltage | 33 V |
| Protective circuit | Transient protection |
| Max. output current | 22 mA |
| Current input signal | 0 mA ... 20 mA (via DIP switch) |
| Degree of protection | IP20 |
| Electrical isolation | Reinforced insulation in accordance with IEC 61010-1 |
| Overvoltage category | II |
| Supply voltage range | 9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715)) |
| Voltage input signal | 0 V ... 5 V (via DIP switch) |
| Assembly instructions | The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715. |
| Current output signal | 0 mA ... 20 mA (via DIP switch) |
| Short-circuit current | < 32 mA |
| Standards/regulations | EN 61000-4-3 |
| Voltage output signal | 0 V ... 5 V (via DIP switch) |
| Limit frequency (3 dB) | 30 Hz (via DIP switch) |
| Nominal supply voltage | 24 V DC |
| Step response (10-90%) | < 8.5 ms (with 30 Hz filter) |
| Rated insulation voltage | 300 V (effective) |
| Configurable/programmable | Yes |
| Maximum transmission error | ≤ 0.1 % (of final value) |
| Typical current consumption | 25 mA (Current output, at 24 V DC incl. load) |
| Certificate of classification | DNV GL 14445-15HH |
| Electromagnetic compatibility | Conformance with EMC Directive 2004/108/EC |
| Input resistance current input | approx. 63 Ω |
| Ambient temperature (operation) | -40 °C ... 70 °C |
| Load/output load current output | ≤ 600 Ω (at 20 mA) |
| Load/output load voltage output | ≥ 10 kΩ |
| Maximum temperature coefficient | 0.01 %/K |
| Input resistance of voltage input | > 1000 kΩ |
| Test voltage, input/output/supply | 3 kV (50 Hz, 1 min.) |
| Conductor cross section flexible max. | 1.5 mm² |
| Conductor cross section flexible min. | 0.2 mm² |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Max. AWG conductor cross section, flexible | 12 |
| Min. AWG conductor cross section, flexible | 24 |
| Single conductor/terminal point, solid, with ferrule, max. | 1.5 mm² |
| Single conductor/terminal point, solid, with ferrule, min. | 0.2 mm² |
| Single conductor/terminal point, solid, without ferrule, max. | 2.5 mm² |
| Single conductor/terminal point, solid, without ferrule, min. | 0.2 mm² |
Product Description
3-way separation amplifier with plug-in connection technology and calibrated measurement range change for galvanic separation of single-pole and bipolar analogue signals. Input/output configurable via
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Technical Details
The 3-way signal conditioner with plug-in connection technology and calibrated measuring range changeover can be configured using DIP switches and is used for the electrical isolation, conversion, amplification, and filtering of unipolar and bipolar standard and normalized signals. On the input side, the standard analog signals 0 ... 20 mA, 4 ... 20 mA, 0 ... 10 V, 0 ... 5 V, 1 ... 5 V or -10 ... 10 V, and signals2 ... 10 V, 0 ... 20 V, 4 ... 20 V, 0 ... 24 V, 0 ... 30 V, -5 ... 5 V, -20 ... 20 V, -24 ... 24 V, -30 ... 30 V and -20 ... 20 mA are available. On the output side, 0 ... 20 mA, 4 ... 20 mA, 0 ... 10 V, 0 ... 5 V, 1 ... 5 V, -10 ... 10 V and -5 ... 5 V are possible. There is no need for adjustment following a measuring range changeover. The measuring transducer supports fault monitoring and NFC communication.
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
