In Stock Hot Product
MINI MCR-2-RPSS-I-2I
MINI MCR-2-RPSS-I-2I 2905628 PHOENIX CONTACT Repeater power supply
$0.00USD
4174 in stock
Key Specifications
:65 mA (For 24 V DC and in power supply duplicator mode)
EMC:A
Note:When being exposed to interference, there may be minimal deviations.
Type:Signal conditioner
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| 65 mA (For 24 V DC and in power supply duplicator mode) | |
| EMC | A |
| Note | When being exposed to interference, there may be minimal deviations. |
| Type | Signal conditioner |
| Color | gray (RAL 7042) |
| Depth | 119.2 mm |
| Width | 6.2 mm |
| Height | 109.81 mm |
| Ripple | < 20 mVPP(500 Ω) |
| Altitude | ≤ 2000 m |
| Comments | Safety measures must be taken to prevent electrostatic discharge. |
| EMC note | EMC: class A product, see manufacturer's declaration in the download area |
| Humidity | B |
| Enclosure | Required protection according to the Rules shall be provided upon installation on board |
| Vibration | A |
| Insulation | Reinforced insulation according to IEC/EN 61010-1 |
| Certificate | CE-compliant |
| Designation | Electromagnetic RF field |
| Temperature | B |
| Product type | Repeater power supply |
| Screw thread | M3 |
| Test voltage | 3 kV AC (50 Hz, 60 s) |
| Assembly note | The DIN rail connector can be used for bridging the supply voltage. It can be snapped onto a 35 mm EN 60715 DIN rail. |
| Configuration | DIP switches |
| HART function | Yes |
| Mounting type | DIN rail mounting |
| Identification | II 3 G Ex ec ic IIC T4 Gc |
| Noise emission | EN 61000-6-4 |
| Noise immunity | EN 61000-6-2 |
| Product family | MINI Analog Pro |
| Status display | Green LED (supply voltage) |
| No. of channels | 2 |
| Article revision | 02 |
| Housing material | PBT |
| Non-load voltage | < 20 V |
| Number of inputs | 1 |
| Pollution degree | 2 |
| Stripping length | 10 mm |
| Connection method | Screw connection |
| Mounting position | any |
| Number of outputs | 2 |
| Power consumption | 1.6 W (at IOUT= 20 mA, 500 Ω load) |
| Tightening torque | 0.5 Nm ... 0.6 Nm |
| Current input signal | 0 mA ... 20 mA (Signal duplicator mode) |
| Degree of protection | IP20 (not assessed by UL) |
| Electrical isolation | 4-way isolation |
| Overvoltage category | II |
| Supply voltage range | 9.6 V DC ... 30 V DC (The DIN rail connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, item no. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail in accordance with EN 60715) |
| Current output signal | 0 mA ... 20 mA (Signal duplicator mode) |
| Ex installation (EPL) | Gc |
| Standards/regulations | EN 61000-4-2 |
| Limit frequency (3 dB) | > 1 kHz |
| Nominal supply voltage | 24 V DC |
| Step response (10-90%) | < 400 µs |
| Description of the input | Sensor circuit |
| Rated insulation voltage | 300 Vrms |
| Max. current output signal | 25 mA |
| Maximum transmission error | 0.05 % (of final value) |
| Transmitter supply voltage | > 19.5 V |
| Conductor cross section AWG | 24 ... 12 (flexible) |
| Typical current consumption | 40 mA (For 24 V DC and in signal duplicator mode) |
| Signal transmission behavior | In = Out |
| Conductor cross section rigid | 0.2 mm² ... 1.5 mm² (with ferrule) |
| Electromagnetic compatibility | Conformance with EMC directive |
| Input resistance current input | 90 Ω (+1.6 V) |
| Ambient temperature (operation) | -40 °C ... 70 °C |
| Load/output load current output | ≤ 500 Ω (per channel) |
| Maximum temperature coefficient | 0.0075 %/K |
| Conductor cross section flexible | 0.14 mm² ... 2.5 mm² |
| Permissible humidity (operation) | 5 % ... 95 % (non-condensing) |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Fire protection for rail vehicles (DIN EN 45545-2) R22 | HL 1 - HL 2 |
| Fire protection for rail vehicles (DIN EN 45545-2) R23 | HL 1 - HL 2 |
| Fire protection for rail vehicles (DIN EN 45545-2) R24 | HL 1 - HL 2 |
Product Description
4-way power duplicator with plug-in connection technology. HART transparency, 0(4) mA input signal ... 20 mA, 0(4) mA output signals ... 20 mA. The device can be used in both signal operating and powe
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
