In Stock Hot Product
MINI MCR-2-RPSS-I-2I-PT
MINI MCR-2-RPSS-I-2I-PT 2905629 PHOENIX CONTACT Repeater power supply
$0.00USD
3200 in stock
Key Specifications
GTIN:4046356999441
Orderkey:2905629
(EMC data):Class I, Zone 2, Group IIC T5
Depth (Note):120.5 mm
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| GTIN | 4046356999441 |
| Orderkey | 2905629 |
| (EMC data) | Class I, Zone 2, Group IIC T5 |
| Depth (Note) | 120.5 mm |
| Packing unit | 1 pc |
| Width (Note) | 6.2 mm |
| (Input data) | 0 mA ... 20 mA (isolator operation) |
| Height (Note) | 110.5 mm |
| (Output data) | 130 mA (at 12 V DC and in repeater power supply operation) |
| ATEX (EMC data) | II 3 G Ex nA IIC T4 Gc X |
| Country of origin | DE (Germany) |
| (Connection data) | Class I, Zone 2, Group IIC T5 |
| Ripple (Input data) | < 20 mVPP(at 500 Ω) |
| Custom tariff number | 85437090 |
| (Ambient conditions) | 0 mA ... 20 mA (isolator operation) |
| DNV GL-EMC (EMC data) | A |
| ATEX (Connection data) | II 3 G Ex nA IIC T4 Gc X |
| Conformance (EMC data) | CE-compliant |
| Designation (EMC data) | Conducted interferences |
| Color (Connection data) | gray |
| Output name (Input data) | Current output |
| Noise emission (EMC data) | EN 61000-6-4 |
| UL, USA/Canada (EMC data) | UL 508 Listed |
| DNV GL-Humidity (EMC data) | B |
| DNV GL-Enclosure (EMC data) | Required protection according to the Rules shall be provided upon installation on board |
| DNV GL-Vibration (EMC data) | A |
| (Standards and Regulations) | For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
| Conformance (Connection data) | CE-compliant |
| DNV GL-Temperature (EMC data) | B |
| Number of outputs (Input data) | 2 |
| Electrical isolation (EMC data) | Reinforced insulation in accordance with IEC 61010-1 |
| Power consumption (Output data) | 1.6 W (at IOUT= 20 mA, 500 Ω load) |
| Stripping length (Power supply) | 10 mm |
| Connection method (Power supply) | Push-in connection |
| Limit frequency (3 dB) (General) | approx. 1 kHz |
| Max. output current (Input data) | 25 mA |
| Noise emission (Connection data) | EN 61000-6-4 |
| Noise immunity (Connection data) | EN 61000-6-2 When being exposed to interference, there may be minimal deviations. |
| Standards/regulations (EMC data) | EN 61000-4-6 |
| UL, USA/Canada (Connection data) | UL 508 Listed |
| No. of channels (Connection data) | 2 |
| Current output signal (Input data) | 4 mA ... 20 mA (repeater power supply and isolator operation) |
| Housing material (Connection data) | PBT |
| Supply voltage range (Output data) | 9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715)) |
| Transmission Behavior (Input data) | 1:1 to input signal |
| Mounting position (Connection data) | any |
| Nominal supply voltage (Output data) | 24 V DC |
| Weight per Piece (excluding packing) | 123.000 g |
| Degree of pollution (Connection data) | 2 |
| Number of inputs (Ambient conditions) | 1 |
| China RoHS (Standards and Regulations) | Environmentally Friendly Use Period = 50 |
| Electrical isolation (Connection data) | Reinforced insulation in accordance with IEC 61010-1 |
| Overvoltage category (Connection data) | II |
| Assembly instructions (Connection data) | The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715. |
| Electromagnetic compatibility (EMC data) | Conformance with EMC directive |
| Limit frequency (3 dB) (Connection data) | > 1 kHz (typ.) |
| Step response (10-90%) (Connection data) | < 400 µs (typ.) |
| Current input signal (Ambient conditions) | 4 mA ... 20 mA (repeater power supply and isolator operation) |
| Designation (Data communication (bypass)) | Conducted interferences |
| Typical current consumption (Output data) | 40 mA (at 24 V DC and in isolator operation) |
| Rated insulation voltage (Connection data) | 300 V |
| Ambient temperature (operation) (Dimensions) | -40 °C ... 70 °C |
| Load/output load current output (Input data) | ≤ 500 Ω (per channel) |
| Maximum transmission error (Connection data) | 0.05 % (of final value) |
| Description of the input (Ambient conditions) | Current input (sensor circuit) |
| Utilization restriction (Key Commercial Data) | EMC: class A product, see manufacturer's declaration in the download area |
| Electromagnetic compatibility (Connection data) | Conformance with EMC directive |
| Transmitter supply voltage (Ambient conditions) | > 19.5 V |
| Maximum temperature coefficient (Connection data) | 0.0075 %/K |
| Input resistance current input (Ambient conditions) | 90 Ω (+1.6 V) |
| Standards/regulations (Data communication (bypass)) | EN 61000-4-6 |
| Test voltage, input/output/supply (Connection data) | 3 kV (50 Hz, 1 min.) |
| Ambient temperature (storage/transport) (Dimensions) | -40 °C ... 85 °C |
| Conductor cross section flexible max. (Power supply) | 2.5 mm² |
| Conductor cross section flexible min. (Power supply) | 0.14 mm² |
| Max. AWG conductor cross section, flexible (Power supply) | 12 |
| Min. AWG conductor cross section, flexible (Power supply) | 24 |
| Fire protection for rail vehicles (DIN EN 45545-2) R22 (EMC data) | HL 1 - HL 2 |
| Fire protection for rail vehicles (DIN EN 45545-2) R23 (EMC data) | HL 1 - HL 2 |
| Fire protection for rail vehicles (DIN EN 45545-2) R24 (EMC data) | HL 1 - HL 2 |
| Fire protection for rail vehicles (DIN EN 45545-2) R22 (Connection data) | HL 1 - HL 2 |
| Fire protection for rail vehicles (DIN EN 45545-2) R23 (Connection data) | HL 1 - HL 2 |
| Fire protection for rail vehicles (DIN EN 45545-2) R24 (Connection data) | HL 1 - HL 2 |
| Single conductor/terminal point, solid, with ferrule, max. (Power supply) | 2.5 mm² |
| Single conductor/terminal point, solid, with ferrule, min. (Power supply) | 0.14 mm² |
| Single conductor/terminal point, solid, without ferrule, max. (Power supply) | 2.5 mm² |
| Single conductor/terminal point, solid, without ferrule, min. (Power supply) | 0.14 mm² |
Product Description
4-way power duplicator with plug-in connection technology. HART transparency, 0(4) mA input signal ... 20 mA, 0(4) mA output signals ... 20 mA. The device can be used in both signal operating and powe
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
