Service time: Monday to Friday 9:00-18:00
MACX MCR-EX-SL-SD-21-60-LP - MACX MCR-EX-SL-SD-21-60-LP 2865515 PHOENIX CONTACT Solenoid driver
In Stock Hot Product

MACX MCR-EX-SL-SD-21-60-LP

MACX MCR-EX-SL-SD-21-60-LP 2865515 PHOENIX CONTACT Solenoid driver

$0.00USD
4670 in stock
Key Specifications
GTIN:4046356160575
Orderkey:2865515
(General):0 (10 years)
Catalog page:Page 163 (C-5-2017)
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support

Technical Specifications

ParameterValue
GTIN4046356160575
Orderkey2865515
(General)0 (10 years)
Catalog pagePage 163 (C-5-2017)
Depth (Note)114.5 mm
Packing unit1 pc
Width (Note)12.5 mm
Height (Note)99 mm
(Output data)Parker Coil VZ95 482160.01 EEx ia IIB T6
(Safety data)IIA
λDD (General)0
λDU (General)0
λSD (General)0
λSU (General)2.84 x 10-7(284 FIT)
Country of originDE (Germany)
(Connection data)Ex nA [ia IIB Ga] IIC T4 Gc
ATEX (Safety data) II (1) G [Ex ia Ga] IIB/IIA
Note (Output data)This is an extract of possible combinations of valves and solenoid drivers.
Group (Safety data)IIB
IECEx (Safety data)[Ex ia Ga] IIB/IIA
Custom tariff number85437090
SIL (Connection data)3
ATEX (Connection data) II (1) G [Ex ia Ga] IIB/IIA
Color (Connection data)gray
IECEx (Connection data)[Ex ia Ga] IIB/IIA
DNV GL-EMC (Safety data)A
Equipment type (General)Type A
Conformance (Safety data)CE-compliant, additionally EN 61326
Noise immunity (Dimensions)EN 61000-6-2
Screw thread (Power supply)M3
(Standards and Regulations)For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”
Noise emission (Safety data)EN 61000-6-4
UL, USA/Canada (Safety data)Class I Div 2; IS for Class I, II, III Div 1
Conformance (Connection data)CE-compliant, additionally EN 61326
DNV GL-Humidity (Safety data)B
Designation (Connection data)Output/input
Maximum altitude (Dimensions)≤ 2000 m
Compatible valve (Output data)ASCO Coil 302 (12 V)
DNV GL-Enclosure (Safety data)Required protection according to the Rules shall be provided upon installation on board
DNV GL-Vibration (Safety data)A
Integrity requirement (General)IEC 61508 - Low demand
Stripping length (Power supply)7 mm
Connection method (Power supply)Screw connection
DNV GL-Temperature (Safety data)B
Status display (Connection data)Yellow LED (switching state / status, lights up when output circuit is active)
UL, USA/Canada (Connection data)Class I Div 2; IS for Class I, II, III Div 1
No. of channels (Connection data)1
Diagnostic coverage (DC) (General)DCS=0 %, DCD=0 %
Group (Safety characteristic data)IIA
Housing material (Connection data)PA 6.6-FR
Response time (Ambient conditions)20 ms
Tightening torque max (Power supply)0.6 Nm
Weight per Piece (excluding packing)120.800 g
Degree of pollution (Connection data)2
Power dissipation (Compatible valves)< 1.325 W
Safe Failure Fraction (SFF) (General)100 %
Tightening torque, min (Power supply)0.5 Nm
China RoHS (Standards and Regulations)Environmentally Friendly Use Period = 50
Electrical isolation (Connection data)375 V (Peak value in accordance with EN 60079-11)
Overvoltage category (Connection data)II
Safety Integrity Level (SIL) (General)3
Interference emission (Connection data)EN 61000-6-4
Electromagnetic compatibility (Safety data)Conformance with EMC directive
Input power Pi (Safety characteristic data)negligible
Ambient temperature (operation) (Dimensions)-40 °C ... 60 °C (any mounting position, pay attention to the derating curve in the data sheet)
Permissible humidity (operation) (Dimensions)10 % ... 95 % (non-condensing)
Utilization restriction (Key Commercial Data)1
Conductor cross section AWG max. (Power supply)14
Conductor cross section AWG min. (Power supply)24
Electromagnetic compatibility (Connection data)Conformance with EMC directive
Conductor cross section solid max. (Power supply)2.5 mm²
Conductor cross section solid min. (Power supply)0.2 mm²
Max. output power Po (Safety characteristic data)1.18 W
Maximum temperature coefficient (Connection data)0.01 %/K
Max. output current Io (Safety characteristic data)188 mA
Max. output voltage Uo (Safety characteristic data)25.1 V
Ambient temperature (storage/transport) (Dimensions)-40 °C ... 80 °C
Conductor cross section flexible max. (Power supply)2.5 mm²
Conductor cross section flexible min. (Power supply)0.2 mm²
Flammability rating according to UL 94 (Safety data)V0
Max. external capacity Co (Safety characteristic data)2.93 µF
Flammability rating according to UL 94 (Connection data)V0
Max. internal inductance Li (Safety characteristic data)negligible
Max. external inductivity Lo (Safety characteristic data)7.5 mH
Max. internal capacitance Ci (Safety characteristic data)negligible
Safety-related maximum voltage Um (Safety characteristic data)253 V AC (125 V DC)
Probability of a hazardous failure on demand (PFDAVG) (General)0 (1 year)
Output characteristic curve: Output resistor (Ambient conditions)133.4 Ω (Internal resistance Ri)

Product Description

Ex i valve control block. For intrinsically safe activation of magnetic Ex i valves, alarm components or LEDs installed in the Ex zone. Current limitation to 58 mA. For gases up to group IIB, loop-fed
Key Features
  • Industrial grade quality
  • RoHS compliant
  • CE certified
  • 1-year warranty

Product Documents

Datasheet

Technical specifications and performance data

User Manual

Installation and operation guide

Top