

| Parameter | Value |
|---|---|
| • WARNING: Only operate products in perfect condition. Regularly check the products for damage. Immediately take out defective products. Replace the damaged products. The item cannot be repaired. | |
| Link | Weld connection |
| note | to a max. connection section |
| Coding | N |
| Application | Signal |
| Flange size | 26 mm x 26 mm |
| Screwing Pg | without |
| Thread type | M23 |
| No. of poles | 12 |
| Product Type | Circular connectors (device side) |
| Clamping Type | For standard and ONECLICK quick locking |
| General notes | Take into account the derating curve. |
| Insertion plan | 12 |
| Contact Material | CuZn |
| Housing Material | GD-Zn |
| Manoeuvring cycles | 100 |
| Degree of pollution | 3 |
| Installation height | 2000 m |
| Safety instructions | WARNING: Connectors must not be connected or disconnected under load. Failure to comply with it and use it in accordance with the rules may result in damage to persons and/or property. |
| Constant temperature | 125 °C (DIN EN 60512-9-2 / 1000 h) |
| Degree of protection | IP68 |
| Overvoltage Category | Iii |
| Direction of rotation | standard |
| Contact Switching Type | female |
| Sizing Impulse Voltage | 2.5 kV |
| Contact Surface Material | Ni/Au |
| Insulation body material | PA 6.6 |
| Rated Voltage Signal Contact | 150 V |
| Degree of protection (engaged) | IP66 / IP68 (2 m / 24 h) |
| Ambient temperature (operating) | -40 °C ... 105 °C (see derating) |
| Contact DiameterSignal contacts | 1 mm |
| Wire sectionSignal contactsMax. | 1 mm² |
| Wire sectionSignal contactsMin. | 0.08 mm² |
| Rated current for each signal contact | 8 A |
| Combustibility class according to UL 94 | V0 |
Technical specifications and performance data
Installation and operation guide