

| Parameter | Value |
|---|---|
| GTIN | 4046356981071 |
| Orderkey | 2702131 |
| Catalog page | Page 168 (C-8-2015) |
| Depth (Note) | 71.5 mm |
| Packing unit | 1 pc |
| Width (Note) | 80 mm |
| (Dimensions) | -40 °C ... 70 °C (Extended, see section “Tested successfully: use under extreme ambient conditions” in the data sheet.) |
| Height (Note) | 119.8 mm |
| Country of origin | DE (Germany) |
| (Connection data) | Failure of the actuator supply Yes |
| (Digital outputs) | Shock in acc. with EN 60068-2-27/IEC 60068-2-27 Operation: 25g, 11 ms duration, semi-sinusoidal shock impulse |
| Custom tariff number | 85389091 |
| Designation (General) | System limits of the bus coupler |
| Note on dimensions (Note) | Specfications with connectors |
| Dimensional drawing (Note) | |
| (Standards and Regulations) | No hazardous substances above threshold values |
| Net weight (Connection data) | 329 g |
| Output name (Digital inputs) | Digital outputs |
| Input name (Inline potentials) | Digital inputs |
| Mounting type (Connection data) | DIN rail |
| Output voltage (Digital inputs) | 24 V DC -1 V (At nominal current) |
| Amount of process data (General) | max. 512 Byte (per station) |
| Designation (Ambient conditions) | Inline connector |
| Degree of protection (Dimensions) | IP20 |
| Input voltage (Inline potentials) | 24 V DC |
| Connection method (Digital inputs) | Inline connector |
| Mechanical tests (Digital outputs) | Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g |
| Number of outputs (Digital inputs) | 4 |
| Protection class (Digital outputs) | III, IEC 61140, EN 61140, VDE 0140-1 |
| (System limits of the bus coupler) | Short-circuit protection of the analog supply |
| Nominal load, lamp (Digital inputs) | 12 W |
| Type of protection (Digital inputs) | Short-circuit and overload protection |
| Nominal load, ohmic (Digital inputs) | 12 W |
| Number of inputs (Inline potentials) | 8 |
| Weight per Piece (excluding packing) | 329.000 g |
| Air pressure (operation) (Dimensions) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| Connection method (Inline potentials) | Inline connector |
| Number of supported devices (General) | max. 63 (per station) |
| Stripping length (Ambient conditions) | 8 mm |
| China RoHS (Standards and Regulations) | Environmentally friendly use period: unlimited = EFUP-e |
| Connection method (Ambient conditions) | Spring-cage connection |
| Connection technology (Digital inputs) | 3-wire |
| Diagnostics messages (Connection data) | Short-circuit / overload of the digital outputs Yes |
| REACh SVHC (Standards and Regulations) | Lead 7439-92-1 |
| Type of protection (Inline potentials) | Reverse polarity protection |
| Nominal output voltage (Digital inputs) | 24 V DC |
| Nominal load, inductive (Digital inputs) | 12 VA (1.2 H, 48 Ω) |
| Connection technology (Inline potentials) | 3-wire |
| Typical response time (Inline potentials) | approx. 500 µs |
| Ambient temperature (operation) (Dimensions) | -25 °C ... 60 °C (Standard) |
| Description of the input (Inline potentials) | EN 61131-2 type 1 |
| Air pressure (storage/transport) (Dimensions) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| Permissible humidity (operation) (Dimensions) | 10 % ... 95 % (non-condensing) |
| Utilization restriction (Key Commercial Data) | 1 |
| Designation (System limits of the bus coupler) | Segment circuit supply (US) |
| Note on weight specifications (Connection data) | with connectors |
| Nominal input current at UIN (Inline potentials) | typ. 3 mA |
| Supply voltage (System limits of the bus coupler) | 24 V DC (via Inline connector) |
| Input voltage range "0" signal (Inline potentials) | -30 V DC ... 5 V DC |
| Input voltage range "1" signal (Inline potentials) | 15 V DC ... 30 V DC |
| Maximum output current per module (Digital inputs) | 2 A |
| Number of devices with parameter channel (General) | max. 8 |
| Maximum output current per channel (Digital inputs) | 500 mA |
| Ambient temperature (storage/transport) (Dimensions) | -40 °C ... 85 °C |
| Power consumption (System limits of the bus coupler) | typ. 3 W (entire device) |
| Power supply unit (System limits of the bus coupler) | max. 8 A DC (sum of UM+ US) |
| Conductor cross section AWG max. (Ambient conditions) | 16 |
| Conductor cross section AWG min. (Ambient conditions) | 28 |
| Permissible humidity (storage/transport) (Dimensions) | 10 % ... 95 % (non-condensing) |
| Type of protection (System limits of the bus coupler) | Short-circuit protection of the communications power |
| Typical input current per channel (Inline potentials) | typ. 3 mA |
| Current consumption (System limits of the bus coupler) | 6 mA (Without connected peripherals) |
| Delay at signal change from 0 to 1 (Inline potentials) | 1.2 ms |
| Delay at signal change from 1 to 0 (Inline potentials) | 1.2 ms |
| Conductor cross section solid max. (Ambient conditions) | 1.5 mm² |
| Conductor cross section solid min. (Ambient conditions) | 0.08 mm² |
| Supply voltage range (System limits of the bus coupler) | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
| Conductor cross section flexible max. (Ambient conditions) | 1.5 mm² |
| Conductor cross section flexible min. (Ambient conditions) | 0.08 mm² |
| Number of local bus devices that can be connected (General) | max. 61 (on board I/Os are two devices) |
| Maximum output current per module / terminal block (Digital inputs) | 2 A |
| Number of supported branch terminals with remote bus branch (General) | 0 |
Technical specifications and performance data
Installation and operation guide