


| Parameter | Value |
|---|---|
| Name (Details) | IDLC-45A-500 |
| State (Details) | New |
| Format (Details) | Box |
| Series (Details) | IDLC-45A |
| Approvals (Details) | CCC, CE, ENEC, UL |
| Power (W) (Details) | 45,00 |
| Regulation (Details) | 0-10V, 1-10V, PWM Signal 10V |
| Subformato (Details) | IP20 |
| Width (mm) (Details) | 75.00 |
| Height (mm) (Details) | 25.00 |
| AC input Max (Details) | 295,00 |
| AC input Min (Details) | 90,00 |
| Applications (Details) | Lighting |
| Manufacturer (Details) | MEAN WELL |
| Product type (Details) | LED Driver |
| Isolation (V) (Details) | 3.750,00 |
| Peak Power (W) (Details) | Forty five |
| Input connector (Details) | Quick Connector |
| Input frequency (Details) | 50 Hz, 60 Hz |
| Long/Background (Details) | 120.00 |
| Long Description (Details) | LED driver dimmable.Specially designed for powering LEDs directly in a steady stream.Format in plastic boxIP20.Input range90-295Vca47-63Hz.Output in constant current500mA.Range of output voltage with current mode constant54 to 90Vccaccording to the number d eLEDs in series.Power:45W.Efficiency typical:85%.Regulation0% to 100% of the output intensity with a slider0-10V / 1-10Vor a PWM signal of 10V with a frequency of 100Hz to 3KHz. With the regulation we can turn off the output, but we need a regulator 0-10V. Regulators 1-10V not arrive to give 0V do not shut down the output.Input class II without grounding.Factor corrector, power>0.92to 230vac at full load.OutputAuxiliary 12V/50mA.Consumption without load <1,2 W.Operating temperature range of caseTcfrom-20ºCup+85ºC.Dimensions (Length x Width x Height):120 x 75 x 25mm.3 years of warranty.Manufacturer: MEAN WELL.The series IDLC are LED drivers designed to work directly with leds (plates LED or COBs), not with LED strips. Must be equipment that is fed in a steady stream. The A version has an outputauxiliaryof12V/50mA.With plastic housing designed for lighting applications in interior.Low ripple current, no flicker (flicker-free).This source works on a Constant Current when we connect the LEDs directly to have a voltage within the Range of Output Voltage mode Constant Current and a working current equal to the output current.These sources can be dimmed with dimmers assets or liabilities of0-10Vor1-10V, signal 10V PWM of 100Hz to 3KHz. Does not work with dimmers Triac dimmer cutting phase.(Not to be confused with regulators TRIACs, cutting phase. This driver cannot be regular with a Triac).With potentiometers assets that you can give 0V to shut down the output without the need of a switch. Dimmers 1-10V we can only reach 10% of regulation without shutting down the output. If you want to regular LED strips, we recommend the series IDLV or PWM.Compatible with any regulator 0-10V or 1-10V-market both assets and liabilities. Some compatible models tested are:MEAN WELL DAP-04S01 (compatible with any push button normally open).SIMON: 75317BJC: 5TC8 425LEGRAND: 0784 04ABB- "NIESSEN": N2260.9SIEMENS: 5TC8424EFAPEL: Model 21210LED BOX: Model LD1160188OSRAM: Model DIM MCUJUNG: Model 240-10We can put about 20 sources for each regulator. The maximum distance is 100 meters between the regulator and the driver. |
| Output connector (Details) | Quick Connector |
| Type of Entry CA (Details) | Single-phase |
| Warranty (Years) (Details) | 3,00 |
| Country of Origin (Details) | China |
| Output current mA (Details) | Five hundred |
| Intensity of Minimum Output (mA) (Details) | 500,00 |
| Intensity of Output Maximum (mA) (Details) | 500,00 |
Technical specifications and performance data
Installation and operation guide