In Stock Hot Product
IC 2,5/ 6-STGF-5,08 BK
IC 2,5/ 6-STGF-5,08 BK 1575229 PHOENIX CONTACT Connector for printed circuit board, nominal section: 2.5 mm²..
$6.24USD
1640 in stock
Key Specifications
:0.2 mm² / flexible / > 10 N
Link:Screw connection with cage
Step:5.08 mm
note:Complies with WEEE/RoHS, no thread-like materials according to IEC 60068-2-82/JEDEC JESD 201
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| 0.2 mm² / flexible / > 10 N | |
| Link | Screw connection with cage |
| Step | 5.08 mm |
| note | Complies with WEEE/RoHS, no thread-like materials according to IEC 60068-2-82/JEDEC JESD 201 |
| type | Reversed |
| Result | Test passed |
| Amplitude | 0.35 mm (10 Hz ... 60.1 Hz) |
| Frequency | 10 - 150 - 10 Hz |
| Packaging | Packed in carton |
| Width [w] | 40.6 mm |
| Height [h] | 15 mm |
| Length [l] | 19.2 mm |
| Shock Form | Semi-sinusoidal |
| Sweep Speed | 1 octave/min |
| Acceleration | 30g |
| Color (Case) | Black (9005) |
| No. of poles | 6 |
| Product Line | COMBICON Connectors M |
| Product Type | Printed circuit board connector |
| Clamping Type | Screw locking |
| Fixing flange | Threaded flange |
| Number of rows | 1 |
| Product Family | CI 2.5/.. -STGF |
| Shock Duration | 18 ms |
| Surface Finish | Galvanic tin plating |
| Test Directions | X, Y and Z axis (pos. and neg.) |
| Connector system | COMBICON MSTB 2.5 |
| Contact Material | Cu Alloy |
| Fixed AC voltage | 2.21 kV |
| Mass Resistivity | 1.8 mΩ |
| Number of cycles | 25 |
| Rated Current IN | 12 A |
| Rated voltage UN | 320 V |
| Tightening torque | 0.3 Nm |
| Manoeuvring cycles | 25 |
| Note for Operation | According to DIN EN 61984, COMBICON connectors are switchable powerless (COC) connectors. For intended use, they must not be plugged in or disconnected when they are still energized or under load. |
| Test Specification | DIN EN 60999-1 (VDE 0609-1):2000-12 |
| Degree of pollution | 3 |
| Dimensioned Drawing | |
| Insulation material | PA |
| Mass Resistivity R1 | 1.8 mΩ |
| Mass Resistivity R2 | 1.7 mΩ |
| Nominal cross-section | 2.5 mm² |
| Sizing voltage (II/2) | 630 V |
| Number of poles tested | 20 |
| Sizing voltage (III/2) | 320 V |
| Sizing voltage (III/3) | 250 V |
| Test duration per axle | 2.5 h |
| Contact Connection Type | Thorn |
| Stress due to corrosion | 0.2 dm3KNOW2on 300 dm3/40 °C/1 cycle |
| Appliance type screw head | Longitudinal slit (L) |
| Insulation Material Group | The |
| Recommended crimping tool | 1212034 CRIMPFOX 6 |
| CTI according to IEC 60112 | 600 |
| Conductor cross-section AWG | 24 ... 12 |
| Rated Impulse Voltage (II/2) | 4 kV |
| Buffer Gauge a x b / diameter | 2.8 mm x 2.0 mm / 2.4 mm |
| Minimum creepage value (II/2) | 3.2 mm |
| Rated impulse voltage (III/2) | 4 kV |
| Rated impulse voltage (III/3) | 4 kV |
| Rigid conductor cross-section | 0.2 mm² ... 2.5 mm² |
| Sizing Impulse Voltage (II/2) | 4 kV |
| Ambient temperature (mounting) | -5 °C ... 100 °C |
| Minimum creepage value (III/2) | 3 mm |
| Minimum creepage value (III/3) | 3.2 mm |
| Rated Isolation Voltage (II/2) | 630 V |
| Sizing Impulse Voltage (III/2) | 4 kV |
| Sizing impulse voltage (III/3) | 4 kV |
| Tensile force per pole approx. | 5 N |
| Ambient temperature (operating) | -40 °C ... 105 °C (depending on the derating curve) |
| Rated Isolation Voltage (III/2) | 320 V |
| Flexible conductor cross-section | 0.2 mm² ... 2.5 mm² |
| Insertion force per pole approx. | 8 N |
| Rated insulation voltage (III/3) | 250 V |
| Stress due to the effect of heat | 105 °C/168 h |
| Conductor/board connection direction | 0 ° |
| Length of the section to be stripped | 7 mm |
| Ambient temperature (storage/transport) | -40 °C ... 70 °C |
| Combustibility class according to UL 94 | V0 |
| Vertical impulse tension above sea level | 4.8 kV |
| Metal surface contact area (middle layer) | Nickel (2 - 3 μm Ni) |
| Relative humidity (transport and storage) | 30 % ... 70 % |
| Metal surface contact zone (surface layer) | Tin (5 - 7 μm Sn) |
| Metal surface connection point (middle layer) | Nickel (2 - 3 μm Ni) |
| 2 conductors of identical cross-section, rigid | 0.2 mm² ... 1 mm² |
| Insulation Resistance Between Contiguous Poles | > 5 MΩ |
| Metal Surface, Connection Point (Surface Layer) | Tin (5 - 7 μm Sn) |
| 2 conductors of identical flexible cross-section | 0.2 mm² ... 1.5 mm² |
| Minimum creepage value - inhomogeneous range (II/2) | 3 mm |
| Minimum creepage value - inhomogeneous range (III/2) | 3 mm |
| Minimum clearance value - inhomogeneous range (III/3) | 3 mm |
| Resistance to surface currents (DIN EN 60112 (VDE 0303-11)) | CTI 600 |
| Brinell hardness test temperature according to EN 60695-10-2 | 125 °C |
| GWIT filament ignition temperature according to EN 60695-2-13 | 775 |
| Flammability index of GWFI filament according to EN 60695-2-12 | 850 |
| Flexible conductor cross-section with mounted lug and plastic collar | 0.25 mm² ... 2.5 mm² |
| Flexible conductor cross-section with cable lug without plastic collar | 0.25 mm² ... 2.5 mm² |
| Conductor cross-section/conductor type/tensile force nominal value/actual value | 0.2 mm² / rigid / > 10 N |
| 2 conductors of the same flexible cross-section with ferrule without plastic collar | 0.25 mm² ... 1 mm² |
| 2 conductors of identical cross-section flexible with TWIN ferrule with plastic collar | 0.5 mm² ... 1.5 mm² |
Product Description
Printed circuit board connector
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
