In Stock Hot Product
IBS RL 480 MLR R DIO6/1-LK2MBD
IBS RL 480 MLR R DIO6/1-LK2MBD 2734497 PHOENIX CONTACT Motor starter
$0.00USD
4276 in stock
Key Specifications
GTIN:4017918974190
Note:Made to Order (non-returnable)
Orderkey:2734497
Catalog page:Page 331 (C-8-2013)
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| GTIN | 4017918974190 |
| Note | Made to Order (non-returnable) |
| Orderkey | 2734497 |
| Catalog page | Page 331 (C-8-2013) |
| Depth (Note) | 138 mm |
| Packing unit | 1 pc |
| Width (Note) | 185.1 mm |
| Height (Note) | 193 mm |
| Country of origin | DE (Germany) |
| (Digital outputs) | Module error during self test Message to the master |
| Ripple (Interfaces) | 3.6 Vpp |
| Custom tariff number | 85389091 |
| Number (Mains connection) | 1 |
| Protection class (General) | I, IEC 61140, EN 61140, VDE 0140-1 |
| Supply voltage (Interfaces) | 24 V DC |
| (Standards and Regulations) | No hazardous substances above threshold values |
| Net weight (Digital outputs) | 3800 g |
| Mounting type (Digital outputs) | on mounting plate |
| Output current (Digital inputs) | 0.5 A |
| Designation (Ambient conditions) | INTERBUS |
| Degree of protection (Dimensions) | IP65/IP67 |
| Input name (Motor starter, brake) | Digital inputs |
| Supply voltage range (Interfaces) | 18.5 V DC ... 32 V DC (including ripple) |
| Switching rate (Mains connection) | 5 cycles per minute, maximum |
| Connection method (Digital inputs) | M12 connector |
| Filter time (Motor starter, brake) | 3 ms |
| Frequency range (Mains connection) | 50 Hz ... 60 kHz |
| Number of outputs (Digital inputs) | 1 |
| Type of contact (Motor monitoring) | Mechanical relay contact |
| Type of protection (Digital inputs) | Electronic short-circuit/overload protection |
| Connection method (Mains connection) | POWER-COMBICON |
| Input voltage (Motor starter, brake) | 24 V DC (DIN EN 61131-2) |
| Number of positions (Digital inputs) | 5 |
| Operating voltage (Mains connection) | 230 V AC ... 480 V AC |
| Weight per Piece (excluding packing) | 3,800.000 g |
| Air pressure (operation) (Dimensions) | 860 hPa ... 1080 hPa (up to 1500 m above sea level) |
| Connection voltage (Motor monitoring) | 12 V AC/DC ... 480 V AC/DC |
| Motor startup time (Mains connection) | 1 s |
| China RoHS (Standards and Regulations) | Environmentally friendly use period: unlimited = EFUP-e |
| Connection method (Ambient conditions) | Fiber optics |
| Diagnostics messages (Digital outputs) | Mains failure, phase failure, blown fuse Error message in diagnostic code (bus) and display by means of the E LED on the motor starter |
| Number of positions (Mains connection) | 8 |
| Pg screw connection (Mains connection) | Pg16 |
| Number of inputs (Motor starter, brake) | 6 |
| Transmission speed (Ambient conditions) | 2 Mbps |
| Utilization category (Mains connection) | On the basis of AC 3 |
| Connection method (Motor starter, brake) | M12 connector |
| Connection technology (Motor monitoring) | POWER-COMBICON terminal strips |
| Nominal current range (Mains connection) | 0.2 A ... 8 A (parameterizable, observe derating) |
| Parameterization (Motor starter, output) | Via INTERBUS |
| Continuous load current (Motor monitoring) | max. 1 A |
| Number of positions (Motor starter, brake) | 5 |
| Overspeed tripping (Motor starter, output) | ≥ 40 A (after 1 second at Inom> 3.6 A) |
| Ambient temperature (operation) (Dimensions) | 0 °C ... 55 °C |
| Connection technology (Motor starter, brake) | 3, 4-wire |
| Air pressure (storage/transport) (Dimensions) | 660 hPa ... 1080 hPa (up to 3500 m above sea level) |
| Permissible humidity (operation) (Dimensions) | 100 % |
| Utilization restriction (Key Commercial Data) | 1 |
| Air clearances and creepage distances (General) | according to EN 50178: 1998 |
| Designation connection point (Mains connection) | X10 |
| Power supply for sensors (Motor starter, brake) | UINI= US1minus 1 V 50 mA Protected against inductive reverse voltages, electronically protected against short-circuiting |
| Designation (Power supply for module electronics) | Mains connection |
| Ambient temperature (storage/transport) (Dimensions) | -25 °C ... 70 °C |
| Input voltage range "0" signal (Motor starter, brake) | 0 V ... 5 V |
| Input voltage range "1" signal (Motor starter, brake) | 11 V ... 30 V |
| Permissible humidity (storage/transport) (Dimensions) | 95 % (non-condensing) |
| Connection method (Power supply for module electronics) | POWER-COMBICON with silver contacts |
| Operating voltage (Power supply for module electronics) | 230 V AC ... 480 V AC ±10 % (conductor voltage) |
| Typical input current per channel (Motor starter, brake) | 5 mA (for US1= 24 V) |
| Number of positions (Power supply for module electronics) | 4 |
| Minimum output voltage with nominal current (Digital inputs) | US1minus 2 V |
| Designation connection point (Power supply for module electronics) | Terminal strip X11 and X12 |
| Max. current carrying capacity (Power supply for module electronics) | 20 A |
| Permissible conductor cross section (Power supply for module electronics) | 2.5 mm² ... 4 mm² |
Product Description
Electromechanical inverter starter controller for INTERBUS; Fibre optic technology with 2 Mbaud, inputs (24 V DC), integrated motor guard relay (220 V AC to 480 V AC, max. 8 A), sensor connection via
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
