

| Parameter | Value |
|---|---|
| UM, US | |
| Fuse | SI 5 x 20 6, 300 AT (in scope of delivery) |
| Type | modular |
| Depth | 71.5 mm |
| Width | 12.2 mm |
| Height | 119.8 mm |
| I/O voltage | 24 V DC |
| Product type | I/O component |
| Test section | 5 V supply, incoming remote bus/7.5 V supply (bus logics) 500 V AC 50 Hz 1 min. |
| ID code (hex) | none |
| Mounting type | DIN rail mounting |
| ID code (dec.) | none |
| Product family | Inline |
| Supply voltage | 24 V DC (via Inline connector) |
| Connection name | Inline connector |
| Number of plugs | 1 |
| Register length | 0 bit |
| Residual ripple | ± ±5 % |
| Article revision | 05 |
| Protection class | III (IEC 61140, EN 61140, VDE 0140-1) |
| Stripping length | 8 mm |
| Connection method | Inline data jumper |
| I/O voltage range | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
| Protective circuit | Polarity protection, surge protection |
| Special properties | 24 V DC |
| Transmission speed | 500 kbps / 2 Mbps |
| Dimensional drawing | |
| Note on application | Only for industrial use |
| Degree of protection | IP20 |
| Number of interfaces | 2 |
| Supply voltage range | 19.2 V ... 30 V (including all tolerances, including ripple) |
| Communications power UL | 7.5 V DC |
| Required parameter data | 0 Byte |
| Air pressure (operation) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| Max. current consumption | 6 A (8 A) |
| Conductor cross section AWG | 28 ... 16 |
| Required configuration data | 0 Byte |
| Conductor cross section rigid | 0.08 mm² ... 1.5 mm² |
| Conductor cross section, rigid | 0.08 mm² ... 1.5 mm² |
| Ambient temperature (operation) | -25 °C ... 55 °C |
| Air pressure (storage/transport) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| Conductor cross section flexible | 0.08 mm² ... 1.5 mm² |
| Permissible humidity (operation) | 10 % ... 95 % (according to DIN EN 61131-2) |
| Conductor cross section, flexible | 0.08 mm² ... 1.5 mm² |
| Ambient temperature (storage/transport) | -25 °C ... 85 °C |
| Permissible humidity (storage/transport) | 10 % ... 95 % (according to DIN EN 61131-2) |
Technical specifications and performance data
Installation and operation guide