

| Parameter | Value |
|---|---|
| GTIN | 4046356418416 |
| Note | Made to Order (non-returnable) |
| Orderkey | 2692733 |
| Catalog page | Page 214 (AX-2011) |
| Depth (Note) | 71.5 mm |
| Packing unit | 1 pc |
| Width (Note) | 48.8 mm |
| (Interfaces) | max. 52 mA (without load) |
| Height (Note) | 119.8 mm |
| Country of origin | DE (Germany) |
| (Digital outputs) | 7.5 V supply (bus logics) / functional earth ground 500 V DC 50 Hz 1 min. |
| (Inline potentials) | 3 ms |
| Custom tariff number | 85389091 |
| (Ambient conditions) | Sensor supply overload No |
| Designation (General) | Inline local bus |
| Designation (Interfaces) | Segment circuit supply (US) |
| No. of channels (General) | 2 |
| Dimensional drawing (Note) | |
| Connection method (General) | Inline data jumper |
| Supply voltage (Interfaces) | 24 V DC (via voltage jumper) |
| (Standards and Regulations) | No hazardous substances above threshold values |
| Transmission speed (General) | 2 Mbps |
| Input name (Inline potentials) | Digital inputs |
| Test section (Digital outputs) | 24 V supply US(IO-Link and digital inputs) / functional earth ground 500 V DC 50 Hz 1 min. |
| Net weight (Ambient conditions) | 200 g |
| Current consumption (Interfaces) | max. 2 A (with load and port supply) |
| Signal delay (Inline potentials) | 3 ms |
| Degree of protection (Dimensions) | IP20 |
| Supply voltage range (Interfaces) | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
| Mounting type (Ambient conditions) | DIN rail |
| Number of outputs (Digital inputs) | max. 4 |
| Type of protection (Digital inputs) | Short-circuit protection |
| Number of inputs (Inline potentials) | max. 4 |
| Weight per Piece (excluding packing) | 200.000 g |
| Air pressure (operation) (Dimensions) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| Connection method (Inline potentials) | Inline connector |
| China RoHS (Standards and Regulations) | Environmentally friendly use period: unlimited = EFUP-e |
| REACh SVHC (Standards and Regulations) | Lead 7439-92-1 |
| Behavior with overload (Digital inputs) | Output may be damaged |
| Input voltage range (Inline potentials) | 0 V ... 30 V |
| Protection class (Electrical isolation) | III, IEC 61140, EN 61140, VDE 0140-1 |
| Connection technology (Inline potentials) | 3-wire |
| Diagnostics messages (Ambient conditions) | Short-circuit of a digital output in the SIO mode Yes |
| Nominal input current (Inline potentials) | 5.5 mA (at 24 V DC) |
| Ambient temperature (operation) (Dimensions) | -25 °C ... 55 °C |
| Description of the input (Inline potentials) | IEC 61131-2 type 1 |
| Nominal current per channel (Digital inputs) | max. 200 mA (INominal) |
| Permissible cable length (Inline potentials) | 20 m |
| Air pressure (storage/transport) (Dimensions) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| Permissible humidity (operation) (Dimensions) | 10 % ... 95 % (according to DIN EN 61131-2) |
| Utilization restriction (Key Commercial Data) | 1 |
| Nominal input current at UIN (Inline potentials) | 2.2 mA |
| Behavior in case of short-circuit (Digital inputs) | Short-circuit protection |
| Input voltage range "0" signal (Inline potentials) | < 5 V (typ.) |
| Input voltage range "1" signal (Inline potentials) | > 11 V DC (typ.) |
| Maximum total current consumption (Digital inputs) | max. 800 mA |
| Note on weight specifications (Ambient conditions) | with connectors |
| Ambient temperature (storage/transport) (Dimensions) | -25 °C ... 85 °C |
| Permissible humidity (storage/transport) (Dimensions) | 10 % ... 95 % (according to DIN EN 61131-2) |
| Delay at signal change from 0 to 1 (Inline potentials) | 3 ms |
| Delay at signal change from 1 to 0 (Inline potentials) | 3 ms |
| Limitation of the voltage induced on circuit interruption (Digital inputs) | approx. -1 V |
Technical specifications and performance data
Installation and operation guide