In Stock Hot Product
HC-Q05-I-CT-M
HC-Q05-I-CT-M 1406538 PHOENIX CONTACT HEAVYCON plug insert, Q5 series, 5-pos., crimp connection
$0.00USD
3993 in stock
Key Specifications
:400 V (Conductor-Conductor)
Type:D7
Width:21 mm
Height:39.5 mm
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| 400 V (Conductor-Conductor) | |
| Type | D7 |
| Width | 21 mm |
| Height | 39.5 mm |
| Length | 21 mm |
| Series | HC-Q |
| General | for HC-D7 housing, CK2,5-ED crimp contacts (crimp contacts not included in scope of supply) |
| Application | Power |
| Product type | Contact insert with a fixed no. of positions |
| Assembly note | To ensure correct use, installation in housing with IP54 protection or better is required |
| Rated current | 20 A (power contacts) |
| Seal material | NBR, conductive |
| Article revision | 06 |
| Contact diameter | 2.5 mm |
| Contact material | Copper alloy |
| Contact numbering | 1 - 5 |
| Tightening torque | 0.5 Nm ... 0.8 Nm (Mounting screws for mounting in the HEAVYCON housing) |
| Connection profile | 5+PE |
| Degree of pollution | 3 |
| Dimensional drawing | |
| Number of positions | 5 |
| Rated surge voltage | 4 kV |
| Overvoltage category | III |
| Connection technology | Crimp connection |
| Contact material type | turned |
| Rated voltage (III/3) | 230 V (Conductor-PE) |
| Standards/regulations | PC: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3) |
| Conductor cross section | 0.5 mm² ... 2.5 mm² (The cross section specification refers to the geometric cross section of the cable used) |
| Contact carrier material | PC |
| Contact surface material | Ag (alternatively Au) |
| Insertion/withdrawal cycles | ≥ 500 |
| Connection cross section AWG | 20 ... 14 |
| Ambient temperature (operation) | -40 °C ... 125 °C (including heating up of contacts) |
| Connection in acc. with standard | IEC / EN |
| Rated voltage for power contacts | 230/400 V |
| Number of connections per position | 1 |
| Connection cross section PE contact | 0.5 mm² ... 2.5 mm² |
| Flammability rating according to UL 94 | V0 |
| Connection cross section PE contact AWG | 20 ... 14 |
| Stripping length of the individual wire | 7.5 mm |
Product Description
Contact insert, number of poles: 5+PE, size: D7, number of connections per pole: 1, Male, Crimped connection, 230 V/400 V, 20 A, 0.5 mm² ... 2.5 mm², Application: Power
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
