

| Parameter | Value |
|---|---|
| rolled | |
| Width | 34.2 mm |
| Height | 34 mm |
| Length | 14.6 mm |
| Series | HC-M-17 |
| General | For HEAVYCON housing type B6 to B48, HC-M-B...MF-... hinged module carrier frame required, CK1,6-ED... crimp contacts, crimp contacts not supplied as standard. |
| Application | Signal |
| Product type | Modular contact insert |
| Assembly note | To ensure correct use, installation in housing with IP54 protection or better is required |
| Rated current | 10 A |
| Article revision | 03 |
| Contact diameter | 1.6 mm |
| Contact material | Copper alloy |
| Contact numbering | 1 - 17 |
| Connection profile | 17 |
| Degree of pollution | 3 |
| Dimensional drawing | |
| Number of positions | 17 |
| Rated surge voltage | 2.5 kV |
| Overvoltage category | III |
| Connection technology | Crimp connection |
| Contact material type | turned |
| No. of power contacts | 0 |
| Rated voltage (III/3) | 63 V |
| Standards/regulations | PC: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3) |
| Minimum housing height | 52 mm |
| Number of module slots | 1 |
| Conductor cross section | 0.14 mm² ... 2.5 mm² |
| No. of control contacts | 17 |
| Contact carrier material | PC |
| Contact surface material | Ag (alternatively Au) |
| Insertion/withdrawal cycles | ≥ 500 |
| Connection cross section AWG | 26 ... 14 |
| Rated voltage (III/2) contacts | 160 V |
| Ambient temperature (operation) | -40 °C ... 125 °C |
| Flammability rating according to UL 94 | V0 |
| Stripping length of the individual wire | 8 mm (6 mm with 2.5 mm²) |
Technical specifications and performance data
Installation and operation guide