

| Parameter | Value |
|---|---|
| 0.14 mm² ... 2.5 mm² (with ferrule) | |
| Type | B16 |
| Width | 53 mm |
| Height | 124 mm |
| Length | 114 mm |
| Series | HC-B |
| Cable outlet | straight |
| Housing type | Complete housing |
| Locking type | Latch |
| Product type | Connector set |
| Assembly note | Coding also using the CP-HC (1686478) coding profiles. HC-B6../ HC-B10..for two coding profiles. HC-B16../ HC-B24..for four coding profiles. |
| Rated current | 16 A |
| Impact strength | IK09 |
| Article revision | 06 |
| Contact material | Copper alloy |
| Housing material | PA |
| Protective cover | no |
| Stripping length | 8 mm ... 10 mm |
| Connection method | Push-in connection |
| Contact numbering | 1 - 16 |
| Tightening torque | 0.8 Nm ... 1.2 Nm (PE connection) |
| Connection profile | 16+PE |
| Degree of pollution | 3 |
| Dimensional drawing | |
| Number of positions | 16 |
| Pg screw connection | none |
| Rated surge voltage | 6 kV |
| Degree of protection | IP66 |
| No. of cable outlets | 1 |
| Overvoltage category | III |
| Connection technology | Push-in connection |
| Rated voltage (III/3) | 500 V |
| Locking latch material | PA |
| Conductor cross section | 0.14 mm² ... 2.5 mm² (with ferrule) |
| Enclosure rating (NEMA) | 12 (UL 50e) |
| External cable diameter | 9 mm ... 17 mm |
| Contact carrier material | PA |
| Contact surface material | Ag |
| Seal material Flat gasket | NBR |
| Insertion/withdrawal cycles | ≥ 500 |
| Connection cross section AWG | 26 ... 14 (with ferrule) |
| Seal material Profile gasket | NBR |
| Type of the screw connection | 1x M25 |
| Width of the assembly cutout | 35 mm |
| Drill hole distance, vertical | 32 mm |
| Length of the assembly cutout | 86 mm |
| Ambient temperature (operation) | -40 °C ... 100 °C |
| Drill hole distance, horizontal | 103 mm |
| Connection in acc. with standard | IEC / EN |
| Flammability rating according to UL 94 | V0 |
Technical specifications and performance data
Installation and operation guide