HC-A 10-ESTC

Parameter	Value
	0.5 Nm ... 0.8 Nm (Mounting screws for mounting in the HEAVYCON housing)
Type	D15
Tests	DIN VDE 0627/86
Width	23 mm
Height	33 mm
Length	56.5 mm
Series	HC-A
General	for flexible conductors with or without ferrules
Product type	Contact insert with a fixed no. of positions
Assembly note	To ensure correct use, installation in housing with IP54 protection or better is required
Rated current	16 A
Article revision	04
Contact diameter	2.5 mm
Contact material	Copper alloy
Contact numbering	1 - 10
Tightening torque	0.7 Nm ... 1 Nm (PE connection)
Connection profile	10+PE
Degree of pollution	3
Dimensional drawing
Number of positions	10
Rated surge voltage	4 kV
Overvoltage category	III
Connection technology	Crimp connection
Contact material type	turned
Rated voltage (III/3)	250 V
Conductor cross section	0.5 mm² ... 4 mm²
Contact carrier material	PA
Contact surface material	Ag (alternatively Au)
Insertion/withdrawal cycles	≥ 500
Connection cross section AWG	20 ... 12
Drill hole distance, vertical	16 mm
Ambient temperature (operation)	-40 °C ... 125 °C (including heating up of contacts)
Drill hole distance, horizontal	49.5 mm
Connection in acc. with standard	IEC / EN
Number of connections per position	1
Constructional and testing regulations	DIN VDE 0627/86
Flammability rating according to UL 94	V0
Stripping length of the individual wire	8 mm

HEAVYCON male insert, A10 series, 10 poles, set connection

Technical specifications and performance data

Installation and operation guide

HC-A 10-ESTC 1676996 PHOENIX CONTACT Contact insert