

| Parameter | Value |
|---|---|
| 7 Nm (Support: EN 62444) | |
| Color | Brass color |
| Shielded | yes |
| Application | EMC |
| Halogen-free | no |
| Manufacturer | BIMED |
| Product type | Cable screw gland |
| Thread pitch | 1.5 mm |
| Assembly note | Method 1Cut the outer sheath, but do not remove it. Feed the cable through the screw connection and then remove the outer sheath. Now pull the cable back until the connection is established between the cable shield and the contact spring.Method 2Push the braided shield back around 15 ... 20 mm over the outer sheath. Insert the cables into the screw connection until the connection is established between the cable shield and the contact spring. |
| Hole diameter | 16.1 mm ... 16.2 mm |
| Article revision | 00 |
| Tightening torque | 7 Nm (Union nut) |
| Dimensional drawing | |
| Degree of protection | IP68 (5 bar, 30 minutes) |
| Seal material O-ring | Perbunan |
| Wrench size, support | 20 mm |
| Design, Strain relief | A |
| Wrench size, union nut | 20 mm |
| Enclosure rating (NEMA) | 4X |
| External cable diameter | 5 mm ... 10 mm |
| Category of shock impact | 6 |
| Manufacturer Designation | BMEM-E1 |
| Seal material Cable seal | CR |
| Hexagon angular dimension | 22 mm |
| Material Compression ring | PA 6 |
| Thread type connection side | M16 x 1.5 |
| Material for screw connection | Brass, nickel-plated |
| Execution of the strain relief | A |
| Ambient temperature (operation) | -40 °C ... 100 °C (static) |
| Length of the connecting thread | 7 mm |
| Cable diameter without cable sheath | 4 mm (Diameter of braided shield) |
| Clamping range of the strain relief clip | 6.00 mm ... 10.00 mm (for UL 514 B) |
Technical specifications and performance data
Installation and operation guide