In Stock Hot Product
FMC 1,5/ 7-STF-3,81 BK
FMC 1,5/ 7-STF-3,81 BK 1571960 PHOENIX CONTACT Connector for printed circuit board, nominal section: 1.5 mm²..
$0.00USD
4233 in stock
Key Specifications
:Cross-section: 0.34 mm²; Length: 7 mm
Link:Push-in spring connection
Step:3.81 mm
note:Complies with WEEE/RoHS, no thread-like materials according to IEC 60068-2-82/JEDEC JESD 201
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| Cross-section: 0.34 mm²; Length: 7 mm | |
| Link | Push-in spring connection |
| Step | 3.81 mm |
| note | Complies with WEEE/RoHS, no thread-like materials according to IEC 60068-2-82/JEDEC JESD 201 |
| type | Standard |
| Result | Test passed |
| Amplitude | 0.35 mm (10 Hz ... 60.1 Hz) |
| Frequency | 10 - 150 - 10 Hz |
| Packaging | Packed in carton |
| Width [w] | 36.76 mm |
| Height [h] | 7.8 mm |
| Length [l] | 22.9 mm |
| Shock Form | Semi-sinusoidal |
| Sweep Speed | 1 octave/min |
| Acceleration | 30g |
| Color (Case) | Black (9005) |
| No. of poles | 7 |
| Product Line | COMBICON Connectors S |
| Product Type | Printed circuit board connector |
| Clamping Type | Screw locking |
| Fixing flange | Screw flange |
| Number of rows | 1 |
| Product Family | FMC 1.5/.. -STF |
| Shock Duration | 18 ms |
| Surface Finish | Hot-dip galvanizing |
| Test Directions | X, Y and Z axis (pos. and neg.) |
| Connector system | COMBICON MC 1.5 |
| Contact Material | Cu Alloy |
| Fixed AC voltage | 1.39 kV |
| Mass Resistivity | 1.8 mΩ |
| Number of cycles | 25 |
| Rated Current IN | 8 A |
| Rated voltage UN | 160 V |
| Tightening torque | 0.3 Nm |
| Manoeuvring cycles | 25 |
| Test Specification | DIN EN 60999-1 (VDE 0609-1):2000-12 |
| Degree of pollution | 3 |
| Dimensioned Drawing | |
| Insulation material | PA |
| Mass Resistivity R1 | 1.8 mΩ |
| Mass Resistivity R2 | 1.9 mΩ |
| Nominal cross-section | 1.5 mm² |
| Sizing voltage (II/2) | 320 V |
| Number of poles tested | 20 |
| Sizing voltage (III/2) | 160 V |
| Sizing voltage (III/3) | 160 V |
| Test duration per axle | 2.5 h |
| Contact Connection Type | female |
| Stress due to corrosion | 0.2 dm3KNOW2on 300 dm3/40 °C/1 cycle |
| Insulation Material Group | The |
| Recommended crimping tool | 1212034 CRIMPFOX 6 |
| CTI according to IEC 60112 | 600 |
| Conductor cross-section AWG | 24 ... 16 |
| Rated Impulse Voltage (II/2) | 2.5 kV |
| Buffer Gauge a x b / diameter | 2.4 mm x 1.5 mm / 1.6 mm |
| Minimum creepage value (II/2) | 1.6 mm |
| Rated impulse voltage (III/2) | 2.5 kV |
| Rated impulse voltage (III/3) | 2.5 kV |
| Rigid conductor cross-section | 0.2 mm² ... 1.5 mm² |
| Sizing Impulse Voltage (II/2) | 2.5 kV |
| Ambient temperature (mounting) | -5 °C ... 100 °C |
| Minimum creepage value (III/2) | 1.5 mm |
| Minimum creepage value (III/3) | 2 mm |
| Rated Isolation Voltage (II/2) | 320 V |
| Sizing Impulse Voltage (III/2) | 2.5 kV |
| Sizing impulse voltage (III/3) | 2.5 kV |
| Tensile force per pole approx. | 6 N |
| Ambient temperature (operating) | -40 °C ... 105 °C (depending on the derating curve) |
| Rated Isolation Voltage (III/2) | 160 V |
| Flexible conductor cross-section | 0.2 mm² ... 1.5 mm² |
| Insertion force per pole approx. | 8 N |
| Rated insulation voltage (III/3) | 160 V |
| Stress due to the effect of heat | 105 °C/168 h |
| Conductor/board connection direction | 0 ° |
| Length of the section to be stripped | 10 mm |
| Ambient temperature (storage/transport) | -40 °C ... 70 °C |
| Combustibility class according to UL 94 | V0 |
| Vertical impulse tension above sea level | 2.95 kV |
| Relative humidity (transport and storage) | 30 % ... 70 % |
| Metal surface contact zone (surface layer) | Tin (4 - 8 μm Sn) |
| Insulation Resistance Between Contiguous Poles | > 5 MΩ |
| Metal Surface, Connection Point (Surface Layer) | Tin (4 - 8 μm Sn) |
| Minimum creepage value - inhomogeneous range (II/2) | 1.5 mm |
| Minimum creepage value - inhomogeneous range (III/2) | 1.5 mm |
| Minimum clearance value - inhomogeneous range (III/3) | 1.5 mm |
| Resistance to surface currents (DIN EN 60112 (VDE 0303-11)) | CTI 600 |
| Brinell hardness test temperature according to EN 60695-10-2 | 125 °C |
| GWIT filament ignition temperature according to EN 60695-2-13 | 775 |
| Flammability index of GWFI filament according to EN 60695-2-12 | 850 |
| cable lug with insulating collar, in accordance with DIN 46228-4 | Cross-section: 0.14 mm²; Length: 8 mm |
| cable lug without insulating collar, in accordance with DIN 46228-1 | Cross-section: 0.25 mm²; Length: 7 mm |
| Flexible conductor cross-section with mounted lug and plastic collar | 0.14 mm² ... 0.75 mm² |
| Flexible conductor cross-section with cable lug without plastic collar | 0.25 mm² ... 1.5 mm² |
| Conductor cross-section/conductor type/tensile force nominal value/actual value | 0.2 mm² / rigid / > 10 N |
Product Description
PCB connector, nominal cross-section: 1.5 mm², colour: black, nominal current: 8 A, nominal voltage (III/2): 160 V, surface contacts: Tin, contact type: Female, number of rows: 1, number of poles: 7,
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
