In Stock Hot Product
FL WLAN 2100
FL WLAN 2100 2702535 PHOENIX CONTACT Wireless module
$0.00USD
4958 in stock
Key Specifications
GTIN:4055626278926
Orderkey:2702535
(General):± 1 kV (asymmetrical)
Packing unit:1 pc
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| GTIN | 4055626278926 |
| Orderkey | 2702535 |
| (General) | ± 1 kV (asymmetrical) |
| Packing unit | 1 pc |
| (Dimensions) | IP68 |
| Signal (General) | ± 0.5 kV (symmetrical) |
| Type (Functions) | IEEE 802.11 a/b/g/n 2.4 GHz and 5 GHz to 300 Mbps |
| Country of origin | DE (Germany) |
| Note (Dimensions) | Degree of protection when installed |
| Voltage (General) | 10 V |
| (Connection data) | Japan |
| Comments (General) | ± 2.2 kV |
| Number (Functions) | 1 |
| Interface (Antenna) | Ethernet (RJ45) |
| Custom tariff number | 85176200 |
| Gain (Wireless card) | 5 dBi |
| (Ambient conditions) | 5 GHz |
| (Ethernet interface) | max. 400 mA (at 9 V DC) |
| (Wireless interface) | MAC filter |
| Test result (General) | Class B |
| Note (Connection data) | Degree of protection when installed |
| Number (Wireless card) | 2 |
| Frequency range (General) | 0.15 MHz ... 80 MHz |
| Mechanical tests (General) | Shock in acc. with EN 60068-2-27/IEC 60068-2-27 30g, 11 ms half-sine shock pulse |
| Connection method (Antenna) | RJ45 |
| Contact discharge (General) | ± 4 kV |
| Depth (Key Commercial Data) | 113.2 mm |
| Width (Key Commercial Data) | 62.8 mm |
| Height (Key Commercial Data) | 36.5 mm |
| Indirect discharge (General) | ± 6 kV |
| Net weight (Connection data) | 370.2 g |
| Transmission speed (Antenna) | 10/100 Mbps |
| Security (Wireless interface) | 802.11i |
| Transmission length (Antenna) | 100 m (per segment) |
| Number of interfaces (Antenna) | 1 |
| Transmission physics (Antenna) | Copper |
| Mounting type (Connection data) | Single-hole mounting |
| Standards/regulations (General) | EN 61000-4-6 |
| Designation (Ambient conditions) | Wireless LAN |
| Designation (Ethernet interface) | 1966101 FMC 1,5/ 3-STF-3,5 |
| Assembly instructions (Functions) | Permanently installed |
| Connection method (Wireless card) | permanently installed |
| Degree of protection (Dimensions) | IP65 |
| Configuration (Wireless interface) | Web-based management, automated CLI |
| Frequency band (Ambient conditions) | 2.4 GHz |
| Supply current (Ethernet interface) | typ. 120 mA (at 24 V DC) |
| Supply voltage (Ethernet interface) | 24 V DC (SELV) |
| Wireless licences (Connection data) | Belgium |
| Wireless licenses (Connection data) | EU, more countries in e-shop |
| Operating modes (Wireless interface) | Access Point / Client Adapter / Repeater |
| Weight per Piece (excluding packing) | 370.200 g |
| Air pressure (operation) (Dimensions) | 800 hPa ... 1080 hPa (up to 2000 m above sea level) |
| Assembly instructions (Wireless card) | Internal antenna |
| Connection method (Ethernet interface) | Push-in spring connection |
| Wireless standard (Ambient conditions) | IEEE 802.11 |
| Note on the connection method (Antenna) | Auto negotiation and autocrossing |
| Transmission power (Ambient conditions) | max. 20 dBm (EIRP) |
| Current consumption (Ethernet interface) | max. 250 mA (at 18 V DC) |
| Note on dimensions (Key Commercial Data) | Outside dimensions |
| Number of positions (Ethernet interface) | 3 |
| Supply voltage range (Ethernet interface) | 18 V DC ... 32 V DC (PELV/SELV) |
| Ambient temperature (operation) (Dimensions) | -40 °C ... 60 °C |
| Cross section range AWG (Ethernet interface) | 24 ... 16 (Use copper wires rated 75° C (UL)) |
| Air pressure (storage/transport) (Dimensions) | 660 hPa ... 1080 hPa (up to 3500 m above sea level) |
| Note on the connection method (Wireless card) | MIMO |
| Permissible humidity (operation) (Dimensions) | 5 % ... 95 % (non-condensing) |
| Quality of service (QoS) (Wireless interface) | Yes |
| Antenna connection method (Ambient conditions) | (Internal) |
| Designation (Power supply for module electronics) | 1966101 FMC 1,5/ 3-STF-3,5 |
| Note on the connection method (Ethernet interface) | Recommended conductor cross section: 0.75 mm² |
| Number of wireless interfaces (Ambient conditions) | 1 IEEE 802. 11 a/b/g/n |
| Ambient temperature (storage/transport) (Dimensions) | -40 °C ... 70 °C |
| Permissible humidity (storage/transport) (Dimensions) | 5 % ... 95 % (non-condensing) |
| Stripping length (Power supply for module electronics) | 10 mm |
| Connection method (Power supply for module electronics) | Push-in spring connection |
| Wireless modules that can be connected (Ambient conditions) | 60 |
| Conductor cross section AWG max. (Power supply for module electronics) | 16 |
| Conductor cross section AWG min. (Power supply for module electronics) | 24 |
| Conductor cross section solid max. (Power supply for module electronics) | 1.5 mm² |
| Conductor cross section solid min. (Power supply for module electronics) | 0.2 mm² |
| Conductor cross section flexible max. (Power supply for module electronics) | 1.5 mm² |
| Conductor cross section flexible min. (Power supply for module electronics) | 0.2 mm² |
Product Description
WLAN access point, client with two internal antennas (MIMO) for single-hole mounting, IP66/68, WLAN 802.11 a, b, g, n, frequency: 2.4 GHz, 5 GHz (incl. DFS channels), connections: COMBICON 9 ... 32V D
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
