

| Parameter | Value |
|---|---|
| N:1-Portmirroring | |
| Type | Block design |
| Color | gray aluminum |
| Depth | 69 mm |
| Width | 128 mm |
| Height | 110 mm |
| Management | Web-based management (HTTP) |
| Redundancy | MRP (Media Redundancy Protocol) |
| Signal LEDs | Supply voltage, data transmission, error, link, activity |
| Product type | Switch |
| Test section | 500 V DC 1 min. |
| Mounting type | DIN rail mounting |
| Noise emission | EN 61000-6-3 +A11 |
| Noise immunity | EN 61000-6-2:2005 |
| Product family | Managed Switch SMCS |
| Status display | LEDs: US1, US2 (power supply), Fail (alarm contact), 2 LEDs per Ethernet port (Link and switchable Activity/Speed/Duplex) |
| Basic functions | Store-and-forward switch complies with IEEE 802.3 4 priority classes in acc. with IEEE 802.1 P TCP/IP protocol, BootP-capable, port-mirroring, integrated web server function, multicast filtering, IGMP snooping, VLAN, Rapid Spanning Tree (RSTP), PROFINET Device, Media Redundancy Protocol (MRP). |
| No. of channels | 8 (RJ45 ports) |
| Residual ripple | 3.6 VPP(within the permitted voltage range) |
| Article revision | 13 |
| Filter functions | Quality of Service (4 priority classes) |
| Protection class | III (VDE 0106) |
| Stripping length | 7 mm |
| Connection method | RJ45 |
| Local diagnostics | US1/2 Supply voltage US1, US2 Green LED |
| MAC address table | 4000 |
| Supported browsers | Internet Explorer 5.5 or higher |
| Transmission speed | 10/100 Mbps |
| Current consumption | 600 mA |
| Supply voltage (DC) | 24 V DC (redundant) |
| Transmission length | 100 m (per segment) |
| Transmission medium | Copper |
| Additional functions | BootP |
| Degree of protection | IP20 |
| Diagnostic functions | RMON History |
| Supply voltage range | 18 V DC ... 32 V DC |
| Time synchronization | SNTP |
| Transmission physics | Copper |
| Vibration (operation) | in accordance with IEC 60068-2-6: 5g, 10 Hz ... 150 Hz |
| Power supply connection | Via COMBICON, max. conductor cross section 2.5 mm² |
| Air pressure (operation) | 86 kPa ... 108 kPa (2000 m above mean sea level) |
| PROFINET device function | PROFINET device |
| PROFINET conformance class | Conformance-Class B |
| Conductor cross section AWG | 24 ... 12 |
| Typical current consumption | 240 mA (at US= 24 V DC) |
| Electromagnetic compatibility | Conformance with EMC Directive 2014/30/EU |
| Note on the connection method | Auto negotiation and autocrossing |
| Conductor cross section, rigid | 0.2 mm² ... 2.5 mm² |
| Signal contact control current | 600 mA (maximum) |
| Signal contact control voltage | 24 V (typical) |
| Ambient temperature (operation) | 0 °C ... 55 °C (non-condensing) |
| Conformance with EMC directives | IEC 61000-6-2 IEC 61000-4-2 (ESD) Criterion A |
| Air pressure (storage/transport) | 66 kPa ... 108 kPa (3500 m above sea level) |
| Permissible humidity (operation) | 5 % ... 95 % (non-condensing) |
| Status and diagnostic indicators | LEDs: US1, US2 (power supply), Fail (alarm contact), 2 LEDs per Ethernet port (Link and switchable Activity/Speed/Duplex) |
| Conductor cross section, flexible | 0.2 mm² ... 2.5 mm² |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Permissible humidity (storage/transport) | 5 % ... 95 % (non-condensing) |
| Maximum power dissipation for nominal condition | 14.4 W |
| Free from substances that could impair the application of coating | Yes |
Technical specifications and performance data
Installation and operation guide