

| Parameter | Value |
|---|---|
| PoDL Power Class 11 | |
| MTTF | 185.12 Years (SN 29500 standard, temperature 25 °C, duty cycle 21%) |
| Depth | 119 mm |
| Width | 45 mm |
| Height | 130 mm |
| General | Telephone and on-site support (for a fee) |
| Management | Web-based management (HTTP/HTTPS) |
| Redundancy | MRP (Media Redundancy Protocol) |
| Signal LEDs | Data Receiving, Link Status |
| Construction | Sample book |
| Product Type | Switch |
| Signal Delay | ≥ 1.9 μs (Store-and-Forward mode, 10/100/1000 MBit/s, depending on frame size) |
| Test voltage | 500 V DC |
| Port Security | MAC-based, RADIUS (IEEE 802.1X), MAC Authentication Bypass |
| Product Family | Managed Switch 2000 |
| Shell material | Fiber-reinforced polycarbonate |
| Supply voltage | 20 V DC ... 32 V DC |
| Connection type | RJ45 |
| Local diagnosis | US1/2 Supply Voltage US1, US2 Green LED |
| Other Functions | MMS & GOOSE Transmission (IEC 61850-8-1) |
| Residual ripple | 3.6 VPP(within the permissible voltage range) |
| Dimension Scheme | |
| Filter Functions | Quality of Service (8 priority classes) |
| Power connection | via COMBICON, max. conductor cross-section 1.5 mm² |
| Protection Index | IP20 |
| Special Features | Extended temperature range, Single Pair Ethernet ports with PoDL |
| Type of mounting | Rail mounting |
| MAC Address Table | 8k |
| Power Consumption | 65 W (Vin= max, tAMB= Max, IPSE= 8x IPoDLmax, 100% data traffic on all connected ports) |
| Status Indication | LEDs: US1, US2 (Power Supply), Fail (Alarm Contact), 2 LEDs for each Ethernet port (Link/Activity and Speed) |
| Verification path | 1 minute at FE 500 V DC |
| Kind of protection | III (VDE 0106) |
| Number of channels | 3 (RJ45 ports) |
| Transmission speed | 10/100/1000 MBit/s |
| Basic Functionality | Switch Store and Forward, IEEE 802.3 compliant |
| Degree of pollution | 2 |
| IP Parameterization | DHCP-Client |
| Supply voltage (DC) | 24 V DC (Simultaneous PoDL power supply according to IEEE 802.3cg) |
| Transmission Length | 100 m (per segment) |
| Transmission Medium | copper |
| Vibration (service) | according to IEC 60068-2-6: 5g, 150 Hz |
| Crashes (in service) | 30g (EN 60068-2-27) |
| Diagnostic functions | RMON History |
| Time Synchronization | SNTP (Simple Network Time Protocol) |
| Transmission Physics | copper |
| AWG Conductor Section | 24 ... 16 |
| Interference emission | EN 61000-6-4 |
| Air Pressure (Service) | 80 kPa ... 110 kPa up to 2000 m above sea level (No derating) |
| Interference resistance | EN 61000-6-2 |
| Rigid conductor section | 0.25 mm² ... 1.5 mm² |
| Length to be de-insulated | 9 mm |
| PROFINET conformity class | Conformance-Class B |
| Flexible conductor section | 0.25 mm² ... 1.5 mm² |
| Maximum Current Absorption | 2.2 A (Us= Min, TAMB= Max, SPE = 8x max. PoDL Power, 100% data traffic on all connected ports) |
| Typical Current Absorption | 1.03 A (to Us= Nom, TAMB= 25°C, SPE = 4x max. PoDL Power, 100% data traffic on all connected ports) |
| Ambient Temperature (Service) | -40 °C ... 70 °C |
| Electromagnetic compatibility | Compliance with EMC Directive 2014/30/EU |
| Compliance with EMC directives | EN 61000-6-2 EN 61000-4-2 (ESD) Criterion B |
| Note about the connection type | Autonegoation and Autocrossing |
| Function of the PROFINET module | PROFINET Device |
| Air Pressure (Storage/Transport) | 79 kPa ... 108 kPa up to 2000 m above sea level (No derating) |
| Status and Diagnostic Indications | LEDs: US1, US2 (Power Supply), Fail (Alarm Contact), 2 LEDs for each Ethernet port (Link/Activity and Speed) |
| Permissible air humidity (service) | 10 % ... 95% (non-condensing) |
| Ambient Temperature (Storage/Transport) | -40 °C ... 85 °C |
| Permissible air humidity (storage/transport) | 10 % ... 95% (non-condensing) |
| Free of disturbing varnish wetting substances | Yes |
| Maximum Dissipated Power with Nominal Condition | 12 W (Vin= max, tAMB= Max, IPSE= 8x IPoDLmax, 100% data traffic on all connected ports) |
Technical specifications and performance data
Installation and operation guide