

| Parameter | Value |
|---|---|
| max. 174 Mbps (Stealth mode, default firewall rules, bidirectional throughput) | |
| Type | Stand-Alone |
| Color | gray aluminum |
| Depth | 69 mm |
| Shock | DIN EN 60068-2-27 |
| Width | 128 mm |
| Height | 110 mm |
| Routing | Standard routing, NAT, 1:1-NAT, port forwarding |
| Filtering | MAC and IP addresses, ports, protocols |
| Signal LEDs | Supply voltage, data transmission, error, link, activity |
| Product type | Security router for the DIN rail |
| Test section | 500 V DC 1 min. |
| Mounting type | DIN rail mounting |
| Authentication | X.509v3 certificates with RSA or PSK |
| Data integrity | MD5, SHA-1, SHA 256, SHA-512 |
| Firewall rules | Configurable stateful inspection firewall |
| Noise emission | EN 61000-6-4 |
| Noise immunity | EN 61000-6-2:2005 |
| Status display | LEDs: LNK, Mode, Inf, ACT, SPD, FD, US1, US2, Fail, and 7-segment display |
| Basic functions | Router with intelligent firewall and Gigabit connectivity and VPN |
| No. of channels | 2 (Combo ports) |
| Residual ripple | 3.6 VPP(within the permitted voltage range) |
| Article revision | 09 |
| Housing material | Metal |
| Protection class | III (IEC 61140, EN 61140, VDE 0140-1) |
| Connection method | SFP/RJ45 |
| Power consumption | 6.5 W |
| Encryption methods | DES, 3DES, AES-128, -192, -256 |
| Protection against | IP spoofing, DoS and Syn Flood Protection |
| Transmission speed | 10/100/1000 Mbps (SFP module: 100/1000 Mbps) |
| Note on application | Only for industrial use |
| Supply voltage (DC) | 24 V DC (redundant) |
| Transmission length | 100 m (per segment) |
| Degree of protection | IP20 |
| Supply voltage range | 18 V DC ... 32 V DC |
| Transmission physics | Copper or SFP module |
| Number of VPN tunnels | 10 (up to 250 tunnels with additional license as an option) |
| Remote Syslog Logging | on externals server |
| Vibration (operation) | in accordance with IEC 60068-2-6: 5g, 10 Hz ... 150 Hz |
| Power supply connection | Via COMBICON, max. conductor cross section 2.5 mm² |
| Air pressure (operation) | 86 hPa ... 108 kPa (1500 m above sea level) |
| Firewall data throughput | max. 417 Mbps (Router mode, default firewall rules, bidirectional throughput) |
| Max. current consumption | 270 mA |
| Typical current consumption | 270 mA (at US= 24 V DC) |
| Electromagnetic compatibility | Conformance with EMC Directive 2014/30/EU |
| Note on the connection method | Either SFP port or RJ45 port active |
| Signal contact control current | 270 mA (typical) |
| Signal contact control voltage | 24 V DC (typical) |
| Ambient temperature (operation) | -20 °C ... 60 °C |
| Conformance with EMC directives | IEC 61000-6-2 IEC 61000-4-2 (ESD) 6 kV contact discharge, 8 kV air discharge |
| Air pressure (storage/transport) | 66 hPa ... 108 kPa (3500 m above sea level) |
| Permissible humidity (operation) | 5 % ... 95 % (non-condensing) |
| Network Time Protocol (NTP) client | Client |
| Link Layer Discovery Protocol (LLDP) | As per protocol 802.2 |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Internet Protocol Security (IPsec) mode | ESP tunnel / ESP transport |
| Permissible humidity (storage/transport) | 5 % ... 95 % (non-condensing) |
| Virtual private network (VPN) throughput | max. 106 Mbps (Router mode, VPN bidirectional throughput) |
| Maximum power dissipation for nominal condition | typ. 6.48 W |
| 1:1 Network Address Translation (NAT) in the VPN | supported |
| Dynamic Host Configuration Protocol (DHCP) support | Server or Relay Agent |
| Free from substances that could impair the application of coating | In acc. with VW specification |
Technical specifications and performance data
Installation and operation guide