In Stock Hot Product
FL MC EF 1300 MM ST
FL MC EF 1300 MM ST 2902854 PHOENIX CONTACT FO converters
$0.00USD
4803 in stock
Key Specifications
:599 Years (SN 29500 standard, temperature 40°C, operating cycle 34.25%)
EMC:B
MTBF:492 Years (Telcordia standard, 25°C temperature, 21% operating cycle (5 days a week, 8 hours a day))
MTTF:1400 Years (SN 29500 standard, temperature 25°C, operating cycle 21%)
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| 599 Years (SN 29500 standard, temperature 40°C, operating cycle 34.25%) | |
| EMC | B |
| MTBF | 492 Years (Telcordia standard, 25°C temperature, 21% operating cycle (5 days a week, 8 hours a day)) |
| MTTF | 1400 Years (SN 29500 standard, temperature 25°C, operating cycle 21%) |
| Note | Please follow the special installation instructions in the documentation! |
| Depth | 114.5 mm |
| Input | ± 2 kV (Test Level 3) |
| Width | 22.5 mm |
| Height | 99 mm |
| Signal | Ethernet |
| Voltage | 10 V |
| Altitude | ≤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation) |
| Comments | Criterion B |
| Humidity | A |
| Enclosure | Required protection according to the Rules shall be provided upon installation on board |
| Vibration | A |
| CCCex note | Use in potentially explosive areas is not permitted in China. |
| Wavelength | 1300 nm |
| Certificate | CE-compliant |
| Criterion A | Normal operating behavior within the specified limits. |
| Criterion B | Temporary impairment to operational behavior that is corrected by the device itself. |
| Fiber types | 50/125 µm |
| Signal LEDs | Activity, link status, 10/100 Mbps |
| Temperature | B |
| Link through | Link fault pass through |
| Product type | Media converter |
| Signal delay | ± 1.3 µs (Store and Forward mode, 10/100 Mbps, depending on the frame size) |
| Mounting type | DIN rail mounting |
| Identification | II 3 G Ex nA IIC T4 Gc X |
| Basic functions | Store-and-forward media converter |
| Color (Housing) | green (RAL 6021) |
| Field intensity | 10 V/m |
| Frequency range | 80 MHz ... 3 GHz (Test Level 3) |
| No. of channels | 1 |
| Article revision | 12 |
| Discharge in air | ± 8 kV (Test Level 3) |
| Stripping length | 7.00 mm |
| Connection method | Plug-in screw terminal block (COMBICON), redundancy possible |
| Contact discharge | ± 6 kV (Test Level 3) |
| Tightening torque | 0.56 Nm ... 0.79 Nm |
| Indirect discharge | ± 6 kV |
| Material (Housing) | PA 6.6-FR |
| Protective circuit | Reverse polarity protection |
| Transmission speed | 10/100 Mbps |
| Dimensional drawing | |
| Note on application | Only for industrial use |
| Transmission length | 100 m (shielded twisted pair) |
| Transmission medium | Multi-mode fiberglass |
| Degree of protection | IP20 |
| Electrical isolation | according to IEEE 802.3 |
| Supply voltage range | 18 V DC ... 30 V DC (Screw connection) |
| MDI-/MDI-X switchover | Auto-MDI(X) |
| Standards/regulations | EN 61000-4-2 |
| Auto-negotiation modes | Auto |
| Transmit capacity, maximum | ≤ -14 dBm ((50/125 µm) dynamic in link mode (average)) |
| Transmit capacity, minimum | ≥ -23.5 dBm ((50/125 µm) dynamic in link mode (average)) |
| Typical current consumption | < 100 mA (24 V DC) |
| Maximum receiver sensitivity | -14 dBm (dynamic in link mode (average)) |
| Minimum receiver sensitivity | -31 dBm (dynamic in link mode (average)) |
| Electromagnetic compatibility | Conformance with EMC Directive 2014/30/EU |
| Ambient temperature (operation) | -40 °C ... 65 °C |
| Permissible humidity (operation) | 5 % ... 95 % (non-condensing) |
| Single-wire/terminal point, flexible | 0.2 mm² ... 2.5 mm² |
| Single conductor/terminal point, rigid | 0.2 mm² ... 2.5 mm² |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Conductor cross section, flexible [AWG] | 24 ... 14 |
| Permissible humidity (storage/transport) | 5 % ... 95 % (non-condensing) |
| Test voltage data interface/power supply | 0.5 kVrms(50 Hz, 1 min.) |
| Transmission length incl. 3 dB system reserve | 6.4 km (F-G 50/125 0.7 dB/km F 1000) |
| Maximum power dissipation for nominal condition | 2.4 W |
| Free from substances that could impair the application of coating | VDMA 24364:2018-05 |
Product Description
Fiber optic converter with connection for fiber optic B-FOC (ST)® (1300nm), for the conversion of 10/100Base-T(X) into multimode fiberglass (50/125μm). Autonegotiation and auto-MDI(X) function. Extens
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
