

| Parameter | Value |
|---|---|
| 879 Years (SN 29500 standard, temperature 40°C, operating cycle 34.25%) | |
| MTBF | 666 Years (Telcordia standard, 25°C temperature, 21% operating cycle (5 days a week, 8 hours a day)) |
| MTTF | 2013 Years (SN 29500 standard, temperature 25°C, operating cycle 21%) |
| Note | Please follow the special installation instructions in the documentation! |
| Depth | 116 mm |
| Input | 2 kV (5 kHz) |
| Width | 22.5 mm |
| Height | 99 mm |
| Signal | Ethernet |
| Voltage | 10 V |
| Altitude | ≤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation) |
| Comments | Criterion B |
| CCCex note | Use in potentially explosive areas is not permitted in China. |
| Management | Web-based management, SNMP, emergency exit with Telnet and serial |
| Web server | yes |
| Application | TCP, UDP, Modbus gateway, PPP |
| Certificate | CE-compliant |
| Criterion A | Normal operating behavior within the specified limits. |
| Criterion B | Temporary impairment to operational behavior that is corrected by the device itself. |
| Product type | Interface converter |
| Assembly note | The product can be snapped onto all 35 mm DIN rails in accordance with EN 60715. |
| Mounting type | DIN rail mounting |
| Identification | II 3 G Ex ec IIC T4 Gc |
| Noise emission | EN 61000-6-4 |
| Noise immunity | EN 61000-6-2:2005 |
| Pin assignment | DTE/DCE switchover via web-based management |
| Color (Housing) | green (RAL 6021) |
| Field intensity | 10 V/m |
| No. of channels | 1 |
| Article revision | 10 |
| Discharge in air | ± 8 kV |
| Stripping length | 7.00 mm |
| Connection method | RJ45 jack, shielded |
| Contact discharge | ± 6 kV |
| Tightening torque | 0.5 Nm ... 0.6 Nm |
| File format/coding | UART/NRZ: 7/8 Bit Data, 1/2 Bit Stopp, None/Even/Odd Parity |
| Material (Housing) | PA 6.6-FR |
| Supported browsers | Netscape Communicator versions 4.5 and up or Internet Explorer versions 5.5 and up |
| Auxiliary protocols | ARP, DHCP, BOOTP, SNMP, RIP, RARP, HTTP, TFTP, ICMP |
| Note on application | Only for industrial use |
| Protocols supported | TCP/IP, UDP, Modbus (TCP, RTU/ASCII), PPP |
| Transmission length | ≤ 100 m (shielded twisted pair) |
| Degree of protection | IP20 |
| Electrical isolation | VCC // Ethernet // Serial |
| Supply voltage range | 19.2 V AC/DC ... 28.8 V AC/DC (via pluggable COMBICON screw terminal block) |
| Termination resistor | 390 Ω (configurable) |
| Standards/regulations | EN 61000-4-2 |
| Serial transmission speed | 10/100 Mbps, auto negotiation |
| Data flow control/protocols | Modbus/TCP |
| Typical current consumption | 100 mA (24 V DC) |
| Number of Modbus/TCP clients | 8 |
| Electromagnetic compatibility | Conformance with EMC Directive 2014/30/EU |
| Ambient temperature (operation) | -25 °C ... 60 °C |
| Permissible humidity (operation) | 10 % ... 95 % (non-condensing) |
| Status and diagnostic indicators | LEDs: UL (logic voltage), TD + RD (data activity serial), FD (full duplex), 100 (100 Mbps mode), Link (Ethernet), Activity (Ethernet), ERR (error) |
| Single-wire/terminal point, flexible | 0.2 mm² ... 2.5 mm² |
| Single conductor/terminal point, rigid | 0.2 mm² ... 2.5 mm² |
| Ambient temperature (storage/transport) | -25 °C ... 70 °C |
| Permissible humidity (storage/transport) | 5 % ... 95 % (non-condensing) |
| Test voltage data interface/power supply | 1.5 kVrms(50 Hz, 1 min.) |
| Test voltage data interface/data interface | 1.5 kVrms(50 Hz, 1 min.) |
| Maximum power dissipation for nominal condition | 2.4 W |
| Free from substances that could impair the application of coating | VDMA 24364:2018-05 |
Technical specifications and performance data
Installation and operation guide