In Stock Hot Product
EXTENDER 2010 ETH TP-G
EXTENDER 2010 ETH TP-G 1319322 PHOENIX CONTACT Gigabit Ethernet extender, network expansion via twisted-pair..
$563.60USD
67 in stock
Key Specifications
:128 Years (SN 29500 standard, temperature 40°C, operating cycle 34.25%)
MTTF:268 Years (SN 29500 standard, temperature 25°C, operating cycle 21%)
Depth:115 mm
Input:± 2.2 kV
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| 128 Years (SN 29500 standard, temperature 40°C, operating cycle 34.25%) | |
| MTTF | 268 Years (SN 29500 standard, temperature 25°C, operating cycle 21%) |
| Depth | 115 mm |
| Input | ± 2.2 kV |
| Width | 23 mm |
| Height | 101 mm |
| Signal | Ethernet |
| Voltage | 10 V |
| Altitude | ≤ 2000 m |
| Comments | Criterion B |
| Material | PA 6.6-FR |
| Mains type | Permanent line |
| Certificate | CE-compliant |
| Criterion A | Normal operating behavior within the specified limits. |
| Criterion B | Temporary impairment to operational behavior that is corrected by the device itself. |
| Output power | ≤ 74 W (With PoL) |
| Product type | Ethernet extenders |
| Mounting type | DIN rail mounting |
| Identification | ISA-S71.04-1985 G3 Harsh Group A |
| Noise emission | EN 61000-6-4, Class A, industrial area of application |
| Noise immunity | EN 55035 |
| Basic functions | Gigabit Ethernet extender in accordance with ITU G.9960 |
| Field intensity | 10 V/m |
| Frequency range | 80 MHz ... 3 GHz (80% amplitude modulation with 1 kHz) |
| No. of channels | 1 |
| Discharge in air | ± 8 kV |
| Pollution degree | 2 |
| Stripping length | 10 mm |
| Connection method | Push-in spring connection |
| Contact discharge | ± 6 kV |
| Cross section AWG | (converted acc. to IEC) |
| Mounting position | Vertical (horizontal DIN rail) |
| Power consumption | ≤ 7.5 W (Without PoL, without PoE) |
| Indirect discharge | ± 6 kV |
| Protective circuit | Overload protection, protection against polarity reversal; Internal device protection: 2x 5 AF, internal series diode |
| Transmission speed | ≤ 1000 Mbps (Depending on the quality of the data line) |
| Protocols supported | Protocol-transparent for TCP/IP, IPv4, and IPv6 |
| Transmission length | < 100 m (shielded twisted pair) |
| Transmission method | QAM (quadrature amplitude modulation) carrier frequency method |
| Degree of protection | IP20 |
| Electrical isolation | VCC (US+GND) // Ethernet (PoE) // G.hn (without PoL) // FE |
| Maximum output power | 15 W (at ≤55°C) |
| Supply voltage range | 18 V DC ... 57 V DC |
| Assembly instructions | To allow for air circulation, mount the device freestanding, with a clearance of at least one centimeter on all sides to other devices. |
| Standards/regulations | EN 61000-4-2 |
| Nominal supply voltage | 24 V DC (Without PoL, without PoE) |
| Conducted noise emission | Class B, domain of use: residential and small commercial |
| Serial transmission speed | 10/100/1000 Mbps |
| Electromagnetic compatibility | Conformance with EMC Directive 2014/30/EU |
| Ambient temperature (operation) | -40 °C ... 60 °C (Free standing, without PoE) |
| Permissible humidity (operation) | 10 % ... 95 % (non-condensing) |
| Single-wire/terminal point, flexible | 0.2 mm² ... 2.5 mm² |
| Flammability rating according to UL 94 | V0 |
| Single conductor/terminal point, rigid | 0.2 mm² ... 2.5 mm² |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Conductor cross section, flexible [AWG] | 24 ... 16 |
| Permissible humidity (storage/transport) | 10 % ... 95 % (non-condensing) |
| Test voltage data interface/power supply | 1.5 kV AC (50 Hz, 1 min.) |
| Max. AWG conductor cross section, flexible | 16 |
| Min. AWG conductor cross section, flexible | 24 |
| Conductor cross section, flexible, with ferrule, with plastic sleeve | 0.2 mm² ... 2.5 mm² |
| Conductor cross section flexible, with ferrule without plastic sleeve | 0.2 mm² ... 2.5 mm² |
| 2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve | 0.5 mm² ... 1.5 mm² |
Product Description
More details
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
