In Stock Hot Product
EV-T2MBIE12-3ACDC-INFRA
EV-T2MBIE12-3ACDC-INFRA 1623492 PHOENIX CONTACT Vehicle Connector test adapter
$0.00USD
4120 in stock
Key Specifications
:Combined Charging System
Type:Accessories
Number:7 (L1, L2, L3, N, PE, DC+, DC-)
Altitude:5000 m (above sea level)
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| Combined Charging System | |
| Type | Accessories |
| Number | 7 (L1, L2, L3, N, PE, DC+, DC-) |
| Altitude | 5000 m (above sea level) |
| Application | as a test adapter for charging station tests |
| Coefficient | 3850 ppm/K |
| Sensor type | Pt 1000 |
| Cable length | 0.5 m |
| Product type | Vehicle Connector test adapter |
| Charging mode | Mode 2, 3, 4 |
| Rated current | 125 A DC |
| Rated voltage | 250 V AC |
| Charging power | 26.6 kW |
| Product family | CHARX connect |
| Bore dimensions | 116 mm x 46 mm / 116 mm x 70 mm |
| Cable structure | 4 x 0.5 mm² |
| Insertion force | < 100 N |
| Attachment point | 2 sensors for the DC contacts |
| Charging current | 32 A |
| Lock recognition | available |
| Withdrawal force | < 100 N |
| Charging standard | CCS type 2 |
| Operating voltage | 12 V |
| Ambient temperature | -50 °C ... 130 °C (Operation) |
| Dimensional drawing | |
| Long-term stability | 0.06 % (after 1000 hours at 130 °C) |
| Insulation resistance | > 5 kΩ |
| Standards/regulations | DIN EN 60751 |
| Mounting hole diameter | 6.80 mm (ø) |
| Switch-off temperature | 90 °C ±1 K (equivalent to a Pt 1000 value of 1346.5 Ω) |
| Temperature monitoring | 2x Pt 1000 |
| Note number of positions | 4-pos. |
| Type of charging current | AC 3-phase |
| Insertion/withdrawal cycles | > 10000 |
| Recommended adaptation time | 600 ms |
| Type of signal transmission | Pulse width modulation with modulated Powerline communication in accordance with ISO/IEC 15118 / DIN SPEC 70121 |
| Mechanical emergency release | available |
| Recommended measured current | 1 mA (1 V at 0°C) |
| Reverse current of the motor | max. 1 A |
| Note on the connection method | Crimp connection, cannot be disconnected |
| Service life insertion cycles | > 10000 load cycles |
| Ambient temperature (operation) | -30 °C ... 50 °C |
| Position of the locking actuator | left-side |
| Typical motor current for locking | 0.2 A |
| Pause time after entry or exit path | 3 s |
| Max. dwell time with reverse current | 1000 ms |
| Mounting type Vehicle charging inlet | Front and rear mounting (0 to 90 degree frontal inclination possible) |
| Maximum voltage for locking detection | 30 V |
| Ambient temperature (storage/transport) | -40 °C ... 80 °C |
| Possible power supply range at the motor | 9 V ... 16 V |
Product Description
CHARX connect, Vehicle Connector test adapter, Accessories, as a test adapter for charging station tests, CCS type 2, IEC 62196-3, 125 A / 850 V (DC), 20 A / 250 V (AC), length: 2 m, locking actuator:
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
