

| Parameter | Value |
|---|---|
| 85 W (at 48 V DC) | |
| Color | green (RAL 6021) |
| Depth | 55 mm |
| Width | 90 mm |
| Height | 75 mm |
| Altitude | ≤ 2000 m |
| Insulation | Basic insulation |
| Product type | Relay Module |
| Mounting type | DIN rail mounting |
| Article revision | 03 |
| Contact material | AgNi |
| Pollution degree | 2 |
| Connection method | Screw connection |
| Mounting position | any |
| Protective circuit | Free-wheeling diode, polarity protection diode, resistor |
| Input voltage range | 176 V DC ... 242 V DC (20 °C) |
| Rated surge voltage | 2.3 kV (1.2/50 μs) |
| Degree of protection | IP20 |
| Overvoltage category | III |
| Typical release time | 10 ms |
| Standards/regulations | DIN EN 50178: 1998-04 |
| Typical response time | 9 ms |
| Contact switching type | Single contact, 6 N/O contacts |
| Mechanical service life | 3x 107cycles |
| Nominal input voltage UN | 220 V DC |
| Rated insulation voltage | 260 V |
| Maximum switching voltage | 250 V AC/DC |
| Conductor cross section AWG | 24 ... 12 |
| Limiting continuous current | 6 A |
| Typical input current at UN | 4 mA |
| Date of last data management | 02.05.2024 |
| Conductor cross section rigid | 0.2 mm² ... 4 mm² |
| Ambient temperature (operation) | -20 °C ... 50 °C |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Interrupting rating (ohmic load) max. | 140 W (at 24 V DC) |
| Degree of protection (Installation location) | ≥ IP54 (Installation location) |
Technical specifications and performance data
Installation and operation guide