

| Parameter | Value |
|---|---|
| Surge protection; Varistor | |
| Note | the following values are applicable if a gold layer is destroyed |
| Color | green (RAL 6021) |
| Depth | 62.5 mm |
| Width | 25 mm |
| Height | 75 mm |
| EMC note | EMC: class A product, see manufacturer's declaration in the download area |
| Application | Filter to prevent interference |
| Product type | Relay Module |
| Screw thread | M3 |
| Mounting type | DIN rail mounting |
| Product family | EMG |
| Article revision | 04 |
| Contact material | Ag, gold-flashed |
| Drive (polarity) | polarized |
| Pollution degree | 2 |
| Stripping length | 8 mm |
| Connection method | Screw connection |
| Mounting position | any |
| Drive and function | monostable |
| Protective circuit | Bridge rectifier; Bridge rectifier |
| Input voltage range | 207 V AC/DC ... 253 V AC/DC (20 °C) |
| Overvoltage category | III |
| Typical release time | 8 ms |
| Standards/regulations | IEC 60664 |
| Typical response time | 10 ms |
| Contact switching type | 2 changeover contacts |
| Maximum inrush current | 0.2 A |
| Type of switch contact | Single contact |
| Mechanical service life | approx. 2x 107cycles |
| Nominal input voltage UN | 230 V AC/DC |
| Maximum switching voltage | 24 V AC/DC |
| Operating voltage display | Yellow LED |
| Conductor cross section AWG | 24 ... 12 |
| Limiting continuous current | 0.5 A |
| Typical input current at UN | 18 mA |
| Date of last data management | 06.05.2024 |
| Conductor cross section rigid | 0.2 mm² ... 4 mm² |
| Test voltage (Winding/contact) | 2.5 kV AC (50 Hz, 1 min., winding/contact) |
| Ambient temperature (operation) | -20 °C ... 40 °C |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Interrupting rating (ohmic load) max. | 5 W |
| Ambient temperature (storage/transport) | -20 °C ... 70 °C |
| Maximum power dissipation for nominal condition | 4.14 W |
Technical specifications and performance data
Installation and operation guide