

| Parameter | Value |
|---|---|
| GTIN | 4017918079840 |
| Note | Made to Order (non-returnable) |
| Orderkey | 2940061 |
| (Coil side) | |
| Catalog page | Page 444 (C-5-2017) |
| Depth (Note) | 62.5 mm |
| Packing unit | 10 pc |
| Width (Note) | 22.5 mm |
| Height (Note) | 75 mm |
| (Contact side) | 29 W (at 60 V DC) |
| Country of origin | DE (Germany) |
| Custom tariff number | 85364900 |
| (Ambient conditions) | RC element RC element |
| Screw thread (General) | M3 |
| Contact type (Coil side) | Double contact, 1 PDT |
| Connection name (General) | Coil side |
| Stripping length (General) | 8 mm |
| Connection method (General) | Screw connection |
| (Standards and Regulations) | For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
| Contact material (Coil side) | AgPd60, hard gold-plated |
| (Connection data output side) | EN 50178 |
| Maximum inrush current (Coil side) | 0.2 A |
| Type of switch contact (Coil side) | Double contact |
| Weight per Piece (excluding packing) | 70.370 g |
| Conductor cross section AWG (General) | 24 ... 12 |
| Maximum inrush current (Contact side) | 2 A |
| Maximum switching voltage (Coil side) | 30 V AC |
| China RoHS (Standards and Regulations) | Environmentally Friendly Use Period = 50 |
| Conductor cross section solid (General) | 0.2 mm² ... 4 mm² |
| Limiting continuous current (Coil side) | 0.5 A |
| Protective circuit (Ambient conditions) | Bridge rectifier Bridge rectifier |
| Insulation (Connection data output side) | Basic insulation |
| Maximum switching voltage (Contact side) | 125 V AC |
| Screw thread (Connection data input side) | M3 |
| Typical release time (Ambient conditions) | 8 ms |
| Conductor cross section flexible (General) | 0.2 mm² ... 2.5 mm² |
| Limiting continuous current (Contact side) | 2 A |
| Typical response time (Ambient conditions) | 10 ms |
| Ambient temperature (operation) (Dimensions) | -20 °C ... 40 °C |
| Connection name (Connection data input side) | Contact side |
| Nominal input voltage UN (Ambient conditions) | 230 V AC |
| Stripping length (Connection data input side) | 8 mm |
| Utilization restriction (Key Commercial Data) | EMC: class A product, see manufacturer's declaration in the download area |
| Connection method (Connection data input side) | Screw connection |
| Operating voltage display (Ambient conditions) | Yellow LED |
| Typical input current at UN (Ambient conditions) | 18 mA |
| Degree of pollution (Connection data output side) | 2 |
| Interrupting rating (ohmic load) max. (Coil side) | 5 W (at 24 V DC) |
| Overvoltage category (Connection data output side) | III |
| Standards/regulations (Connection data output side) | IEC 60664 |
| Ambient temperature (storage/transport) (Dimensions) | -20 °C ... 70 °C |
| Interrupting rating (ohmic load) max. (Contact side) | 29 W (at 24 V DC) |
| Conductor cross section AWG (Connection data input side) | 24 ... 12 |
| Conductor cross section solid (Connection data input side) | 0.2 mm² ... 4 mm² |
| Input voltage range in reference to UN (Ambient conditions) | 0.9 ... 1.1 |
| Net weight (SAP) (Contact side (with destroyed gold layer)) | 70.37 g |
| Mounting position (Contact side (with destroyed gold layer)) | any |
| Power dissipation for nominal condition (Ambient conditions) | 4.14 W |
| Conductor cross section flexible (Connection data input side) | 0.2 mm² ... 2.5 mm² |
| Mechanical service life (Contact side (with destroyed gold layer)) | approx. 2x 107cycles |
| Test voltage relay winding/relay contact (Contact side (with destroyed gold layer)) | 2.5 kV AC (50 Hz, 1 min.) |
Technical specifications and performance data
Installation and operation guide