

| Parameter | Value |
|---|---|
| 58 W (at 48 V DC) | |
| Color | green (RAL 6021) |
| Depth | 62.5 mm |
| Width | 17.5 mm |
| Height | 75 mm |
| Altitude | ≤ 2000 m |
| EMC note | EMC: class A product, see manufacturer's declaration in the download area |
| Insulation | Reinforced insulation |
| Product type | Relay Module |
| Screw thread | M3 |
| Mounting type | DIN rail mounting |
| Article revision | 13 |
| Contact material | AgNi |
| Pollution degree | 2 |
| Stripping length | 8 mm |
| Connection method | Screw connection |
| Mounting position | any |
| Protective circuit | Bridge rectifier; Bridge rectifier |
| Input voltage range | 184 V AC ... 253 V AC (20 °C) |
| Rated surge voltage | 6 kV (1.2/50 μs) |
| Degree of protection | IP20 |
| Overvoltage category | III |
| Typical release time | 10 ms |
| Standards/regulations | DIN EN 50178: 1998-04 |
| Typical response time | 7 ms |
| Contact switching type | Single contact, 1 changeover contact |
| Maximum inrush current | 15 A (max. 4 seconds up to a duty ratio of 10%) |
| Type of switch contact | Single contact |
| Mechanical service life | 3x 107cycles |
| Nominal input voltage UN | 230 V AC |
| Rated insulation voltage | 250 V |
| Maximum switching voltage | 250 V AC/DC |
| Operating voltage display | Yellow LED |
| Conductor cross section AWG | 24 ... 12 |
| Limiting continuous current | 6 A |
| Typical input current at UN | 4.5 mA |
| Date of last data management | 02.05.2024 |
| Conductor cross section rigid | 0.2 mm² ... 4 mm² |
| Ambient temperature (operation) | -20 °C ... 50 °C |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Interrupting rating (ohmic load) max. | 144 W (at 24 V DC) |
| Degree of protection (Installation location) | ≥ IP54 (Installation location) |
| Maximum power dissipation for nominal condition | 1.15 W |
Technical specifications and performance data
Installation and operation guide