

| Parameter | Value |
|---|---|
| Surge protection | |
| Depth | 102 mm |
| Width | 17.5 mm |
| Height | 75 mm |
| Indication | Red LED |
| Screw thread | M3 |
| Operating mode | 100% operating factor |
| Output circuit | 3-conductor, ground-referenced |
| Status display | Yellow LED |
| Connection name | Input side |
| Leakage current | 150 µA |
| Pollution degree | 2 |
| Stripping length | 8 mm |
| Connection method | Screw connection |
| Mounting position | any |
| Type of protection | Protection against polarity reversal |
| Degree of protection | IP20 |
| Output voltage range | 10 V DC ... 30 V DC |
| Overvoltage category | III |
| Assembly instructions | In rows with zero spacing |
| Peak offstate voltage | 33 V DC (Collector-emitter reverse voltage) |
| Standards/regulations | IEC 60664 |
| Typical response time | 50 ms |
| Typical turn-off time | 12 ms |
| Output nominal voltage | 24 V DC |
| Transmission frequency | 10 Hz |
| Nominal input voltage UN | 230 V AC |
| Test voltage input/output | 2.5 kV AC |
| Conductor cross section AWG | 24 ... 12 |
| Limiting continuous current | 2 A (see derating curve) |
| Typical input current at UN | 2 mA |
| Protective circuit/component | Polarity protection diode |
| Conductor cross section solid | 0.2 mm² ... 4 mm² |
| Rated surge voltage/insulation | Basic insulation |
| Ambient temperature (operation) | -20 °C ... 60 °C |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Current limitation at short-circuits | > 2 A (short-circuit resistant) |
| Flammability rating according to UL 94 | V0 |
| Input voltage range in reference to UN | 0.8 ... 1.2 |
| Ambient temperature (storage/transport) | -20 °C ... 70 °C |
| Voltage drop at max. limiting continuous current | ≤ 0.3 V |
| Switching threshold "0" signal in reference to UN | ≤ 0.4 |
| Switching threshold "1" signal in reference to UN | ≥ 0.8 |
Technical specifications and performance data
Installation and operation guide