

| Parameter | Value |
|---|---|
| Surge protection | |
| Depth | 114.5 mm |
| Width | 40 mm |
| Height | 99 mm |
| Indication | Red LED |
| Input name | Device supply |
| Insulation | Basic insulation |
| Designation | Air clearances and creepage distances between the power circuits |
| Output name | AC output |
| Screw thread | M3 |
| Surge current | 200 A (t = 10 ms) |
| Operating mode | 100% operating factor |
| Status display | Yellow LED |
| Connection name | Control circuits |
| Leakage current | 6 mA |
| Mains frequency | 50 Hz |
| Max. load value | 250 A2s |
| Pollution degree | 2 |
| Residual voltage | < 1.5 V |
| Stripping length | 8 mm |
| Connection method | Screw connection |
| Mounting position | Vertical (horizontal DIN rail) |
| Protective circuit | Protection against polarity reversal Suppressor diode |
| Type of protection | RCV circuit |
| Switching frequency | ≤ 10 Hz |
| Switching threshold | 9.6 V (“0” signal) |
| Degree of protection | IP20 |
| Overvoltage category | III |
| Assembly instructions | Can be aligned with spacing = 20 mm |
| Standards/regulations | DIN EN 50178 |
| Nominal output voltage | 500 V AC |
| Surge voltage protection | > 575 V AC |
| Test voltage input/output | 5 kVrms |
| Rated actuating current IC | 8.3 mA |
| Rated actuating voltage UC | 24 V DC |
| Conductor cross section AWG | 24 ... 14 |
| Nominal output voltage range | 48 V AC ... 575 V AC |
| Conductor cross section solid | 0.2 mm² ... 2.5 mm² |
| Periodic peak reverse voltage | 1200 V |
| Ambient temperature (operation) | -25 °C ... 70 °C |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Rated operating current at AC-51 | 2 A |
| Rated operating current at AC-53a | 2 A |
| Voltage range with reference to UC | 0.8 ... 1.25 |
| Ambient temperature (storage/transport) | -25 °C ... 70 °C |
Technical specifications and performance data
Installation and operation guide