In Stock Hot Product
EASY223-SWIRE
EASY223-SWIRE 106950 EATON ELECTRIC Gateway CANopen-easyNet/SmartWire
$0.00USD
3409 in stock
Key Specifications
:>>>>>>>
Solid:
Weight:
Storage:
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| >>>>>>> | |
| Solid | |
| Weight | |
| Storage | |
| Mounting | |
| Standards | |
| Baud rates | |
| at 24 V DC | |
| Description | |
| Condensation | |
| Feature Name | Feature Value |
| Signal lines | |
| Supply cable | |
| Voltage dips | |
| Air discharge | |
| Bus addresses | |
| 10.2.5 Lifting | |
| Residual ripple | |
| Admissible range | |
| Depth (EF000049) | 101.2 mm |
| Width (EF000008) | 35 mm |
| AS-I power supply | |
| Contact discharge | |
| Height (EF000040) | 90 mm |
| IEC/EN 60068-2-42 | 4 days SO2 |
| IEC/EN 60068-2-43 | 4 days H2S |
| Mounting position | |
| 10.2.7 Inscriptions | |
| Potential isolation | |
| Corrosion resistance | |
| Standard screwdriver | |
| Flexible with ferrule | |
| Insulation resistance | |
| 10.10 Temperature rise | |
| Dimensions (W x H x D) | |
| Max. tightening torque | |
| 10.2.6 Mechanical impact | |
| Air pressure (operation) | |
| 10.13 Mechanical function | |
| Bus terminating resistors | |
| Constant acceleration 2 g | |
| Drop to IEC/EN 60068-2-31 | Drop height |
| Heat dissipation capacity | Pdiss |
| IO link master (EF007298) | No |
| Rated operational voltage | Ue |
| easy‐NET operating mode | |
| 10.11 Short-circuit rating | |
| 10.9 Insulation properties | |
| Constant amplitude 0.15 mm | |
| 10.2.2 Corrosion resistance | |
| Heat dissipation at 24 V DC | |
| System accessory (EF004118) | No |
| Operating ambient temperature | |
| Radio standard GSM (EF008524) | No |
| Radio standard LTE (EF009709) | No |
| Vibrations (IEC/EN 60068-2-6) | |
| Radio interference suppression | |
| Radio standard GPRS (EF008523) | No |
| Radio standard UMTS (EF008525) | No |
| Radio standard eGPRS (EF009703) | No |
| 10.9.3 Impulse withstand voltage | |
| IEC/EN 61439 design verification | |
| Rack-assembly possible (EF007018) | No |
| Front built-in possible (EF007016) | No |
| 10.12 Electromagnetic compatibility | |
| Radio standard Bluetooth (EF007178) | No |
| 10.2 Strength of materials and parts | |
| With potential separation (EF003272) | No |
| Overvoltage category/pollution degree | |
| Radio standard WLAN 802.11 (EF007179) | No |
| Suitable for rail mounting (EF003972) | No |
| 10.4 Clearances and creepage distances | |
| 10.5 Protection against electric shock | |
| Supporting protocol for ASI (EF003051) | No |
| Supporting protocol for CAN (EF003053) | No |
| Supporting protocol for KNX (EF003055) | No |
| Supporting protocol for LON (EF003017) | No |
| Technical data for design verification | |
| 10.3 Degree of protection of ASSEMBLIES | |
| Clearance in air and creepage distances | |
| Free fall, packaged (IEC/EN 60068-2-32) | |
| 10.8 Connections for external conductors | |
| 10.9.2 Power-frequency electric strength | |
| Suitable for safety functions (EF001597) | No |
| Wall mounting/direct mounting (EF007020) | No |
| Burst Impulse (IEC/EN 61000-4-4, Level 3) | |
| Supporting protocol for Modbus (EF003057) | No |
| Supporting protocol for SERCOS (EF006657) | No |
| Supporting protocol for TCP/IP (EF003050) | No |
| Supporting protocol for SUCONET (EF003060) | No |
| Supporting protocol for EtherCAT (EF017564) | No |
| Supporting protocol for INTERBUS (EF003054) | No |
| Supporting protocol for PROFIBUS (EF003052) | No |
| Appendant operation agent (Ex ia) (EF004141) | No |
| Appendant operation agent (Ex ib) (EF004142) | No |
| Heat dissipation per pole, current-dependent | Pvid |
| Supporting protocol for DeviceNet (EF003059) | No |
| Supporting protocol for PROFIsafe (EF007526) | No |
| Equipment heat dissipation, current-dependent | Pvid |
| Protection type (IEC/EN 60529, EN50178, VBG 4) | |
| Static heat dissipation, non-current-dependent | Pvs |
| Supporting protocol for EtherNet/IP (EF007521) | No |
| Supporting protocol for PROFINET IO (EF007525) | No |
| Supporting protocol for SafetyBUS p (EF007527) | No |
| Supporting protocol for Data-Highway (EF003058) | No |
| Supporting protocol for PROFINET CBA (EF007524) | No |
| 10.2.4 Resistance to ultra-violet (UV) radiation | |
| Electromagnetic fields (RFI) to IEC EN 61000-4-3 | |
| power pulses (surge) (IEC/EN 61000-4-5, level 2) | |
| 10.7 Internal electrical circuits and connections | |
| Supporting protocol for INTERBUS-Safety (EF006662) | No |
| Supporting protocol for DeviceNet Safety (EF007520) | No |
| Supporting protocol for other bus systems (EF003062) | No |
| Relative humidity, non-condensing (IEC/EN 60068-2-30) | |
| 10.6 Incorporation of switching devices and components | |
| Certified for UL hazardous location class I (EF017622) | No |
| Supporting protocol for Foundation Fieldbus (EF007522) | No |
| Certified for UL hazardous location class II (EF017625) | No |
| 10.2.3.1 Verification of thermal stability of enclosures | |
| 10.9.4 Testing of enclosures made of insulating material | |
| Certified for UL hazardous location class III (EF017627) | No |
| Electrostatic discharge (IEC/EN 61000-4-2, Level 3, ESD) | |
| Rated operational current for specified heat dissipation | In |
| Certified for UL hazardous location division 1 (EF017628) | No |
| Certified for UL hazardous location division 2 (EF017629) | No |
| Immunity to line-conducted interference to (IEC/EN 61000-4-6) | |
| Supporting protocol for AS-Interface Safety at Work (EF007519) | No |
| Certified for UL hazardous location group D (propane) (EF017636) | No |
| Certified for UL hazardous location group B (hydrogen) (EF017633) | No |
| Certified for UL hazardous location group C (ethylene) (EF017635) | No |
| Fieldbus connection over separate bus coupler possible (EF004002) | No |
| Certified for UL hazardous location group A (acetylene) (EF017632) | No |
| Certified for UL hazardous location group E (metal dusts) (EF017637) | No |
| 10.2.3.2 Verification of resistance of insulating materials to normal heat | |
| Mechanical shock resistance (IEC/EN 60068-2-27) semi-sinusoidal 15 g/11 ms | |
| Certified for UL hazardous location group F (carbonaceous dusts) (EF017638) | No |
| Certified for UL hazardous location group G (non-conductive dusts) (EF017639) | No |
| 10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects | |
| In easy-NET mode the gateway acts as a station on easy-NET and the SmartWire master at the same time. Up to 8 stations on the easy‐NET can be intelligently connected with each other. | |
| Noteseasy‐NET operating modeCANopen® operating modeIn easy-NET mode the gateway acts as a station on easy-NET and the SmartWire master at the same time. Up to 8 stations on the easy‐NET can be intelligently connected with each other.CANopen® mode allows communication between SmartWire modules and controllers with CANopen® interface such as EC4‐200 or XC100/200. In addition to standard fieldbus modules such as remote I/O systems or visualisation devices, this allows a number of switchgear devices can be networked directly with the PLC. Up to 126 stations can be connected to a CANopen® network, depending on the performance level of the CANopen® fieldbus master.GeneralStandardsEN 55011, EN 55022, IEC/EN 61000-4, IEC/EN 60068-2-27, EN 50325Dimensions (W x H x D)mm35.5 x 90 x 58 (2 PE)Weightkg0.15MountingTop-hat rail IEC/EN 60715, 35 mm or screw fixing using fixing brackets ZB4-101-GF1 (accessories)Terminal capacitiesSolidmm20.34 - 1.5 (AWG 22 - 16)Flexible with ferrulemm20.34 - 1.5 (AWG 22 - 16)Standard screwdrivermm3.5 x 0.8Max. tightening torqueNm0.6Climatic environmental conditionsOperating ambient temperature°C-25 to 55, cold as per IEC 60068-2-1, heat as per IEC 60068-2-2CondensationTake appropriate measures to prevent condensationStorage°C- 25 - 70Relative humidity, non-condensing (IEC/EN 60068-2-30)%5 - 95Air pressure (operation)hPa795 - 1080Corrosion resistancecm³/m³IEC/EN 60068-2-424 days SO2cm3/m310IEC/EN 60068-2-434 days H2Scm3/m31Ambient conditions, mechanicalProtection type (IEC/EN 60529, EN50178, VBG 4)IP20Vibrations (IEC/EN 60068-2-6)HzConstant amplitude 0.15 mmHz10 - 57Constant acceleration 2 gHz57 - 150Mechanical shock resistance (IEC/EN 60068-2-27) semi-sinusoidal 15 g/11 msImpacts18Drop to IEC/EN 60068-2-31Drop heightmm50Free fall, packaged (IEC/EN 60068-2-32)m1Mounting positionVertical (on horizontal top-hat rail)Electromagnetic compatibility (EMC)Overvoltage category/pollution degreeII/2Electrostatic discharge (IEC/EN 61000-4-2, Level 3, ESD)kVAir dischargekV8Contact dischargekV4Electromagnetic fields (RFI) to IEC EN 61000-4-3V/m10Radio interference suppressionEN 55011 Class B, EN 55022 Class BBurst Impulse (IEC/EN 61000-4-4, Level 3)Supply cablekV2Signal lineskV2power pulses (surge) (IEC/EN 61000-4-5, level 2)kV0.5 (supply cables, symmetrical)Immunity to line-conducted interference to (IEC/EN 61000-4-6)V10Insulation resistanceClearance in air and creepage distancesEN 50178, UL 508, CSA C22.2, No. 142Insulation resistanceEN 50178Power supplyRated operational voltageUeV24 (-15/+20 %)Admissible rangeV DC20.4 - 28.8Residual ripple%< 5at 24 V DCmANormally 200Voltage dipsms≤ 10Heat dissipation at 24 V DCW2Protection against polarity reversalAS-I power supplyYesPROFIBUS DPPotential isolationYes, for UAUX, UGATEWAY, SmartWireBaud rates1000 (6 m) … 10 kBit/s (1000 m) easyNet: adjustable via easyNet configuration (station 1) or terminal mode with CANopen®: automaticBus terminating resistorsExternal, first and last stationBus addresseseasyNet: 2 … 8, adjustable via easyNet configutarion (station 1) or terminal mode CANopen®: 1 … 126, adjustable via DIP switchesDesign verification as per IEC/EN 61439(Show features)(Hide features)Technical data for design verificationRated operational current for specified heat dissipationInA0Heat dissipation per pole, current-dependentPvidW0Equipment heat dissipation, current-dependentPvidW0Static heat dissipation, non-current-dependentPvsW2Heat dissipation capacityPdissW0IEC/EN 61439 design verification10.2 Strength of materials and parts10.2.2 Corrosion resistanceMeets the product standard's requirements.10.2.3.1 Verification of thermal stability of enclosuresMeets the product standard's requirements.10.2.3.2 Verification of resistance of insulating materials to normal heatMeets the product standard's requirements.10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effectsMeets the product standard's requirements.10.2.4 Resistance to ultra-violet (UV) radiationMeets the product standard's requirements.10.2.5 LiftingDoes not apply, since the entire switchgear needs to be evaluated.10.2.6 Mechanical impactDoes not apply, since the entire switchgear needs to be evaluated.10.2.7 InscriptionsMeets the product standard's requirements.10.3 Degree of protection of ASSEMBLIESMeets the product standard's requirements.10.4 Clearances and creepage distancesMeets the product standard's requirements.10.5 Protection against electric shockDoes not apply, since the entire switchgear needs to be evaluated.10.6 Incorporation of switching devices and componentsDoes not apply, since the entire switchgear needs to be evaluated.10.7 Internal electrical circuits and connectionsIs the panel builder's responsibility.10.8 Connections for external conductorsIs the panel builder's responsibility.10.9 Insulation properties10.9.2 Power-frequency electric strengthIs the panel builder's responsibility.10.9.3 Impulse withstand voltageIs the panel builder's responsibility.10.9.4 Testing of enclosures made of insulating materialIs the panel builder's responsibility.10.10 Temperature riseThe panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.10.11 Short-circuit ratingIs the panel builder's responsibility.10.12 Electromagnetic compatibilityIs the panel builder's responsibility.10.13 Mechanical functionThe device meets the requirements, provided the information in the instruction leaflet (IL) is observed.DimensionsIL05013003Z (AWA2528+1251-2355) Connection system SmartWire: Gateway easyNet/CANopen>>>>>>> | easy‐NET operating mode |
Product Description
SmartWire-DT gateway for connection to the field bus and for supply of the SmartWire-DT card and switchgears.
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Technical Details
easy‐NET operating mode
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
