


| Parameter | Value |
|---|---|
| (Mounting) | |
| M3 (Mounting) | E3T-SL22M 2M |
| 1 m (Mounting) | Light-ON |
| Flat (Mounting) | Side-view |
| Item (Mounting) | Diffuse-reflective |
| Lens (Mounting) | Denatured polyarylate |
| 300 mm (Mounting) | Light-ON |
| Dark-ON (Mounting) | M2 |
| E3T-FD1 (Mounting) | E3T-SL1 |
| Storage (Mounting) | -40 to 70°C (with no icing or condensation) |
| Material (Mounting) | Case |
| Side-view (Mounting) | Flat |
| 1 to 30 mm (Mounting) | Light-ON |
| 5 to 30 mm (Mounting) | Light-ON |
| Sensor type (Mounting) | Sensing distance |
| Through-beam (Mounting) | 500 mm |
| Response time (Mounting) | 1 ms max. |
| Display window (Mounting) | Denatured polyarylate |
| Retro-reflective (Mounting) | 30 to 200 mmon reflectors/10 to 100 mmon reflective foils |
| Sensing distance (Mounting) | 5 to 30 mm |
| Black/white error (Mounting) | - |
| Diffuse-reflective (Mounting) | 5 to 30 mm |
| Limited-reflective (Mounting) | 5 to 15 mm |
| Ambient temperature (Mounting) | Operating |
| Protective circuits (Mounting) | Power supply and control output reverse polarity protectionOutput short-circuit protection, Mutual interference prevention |
| Degree of protection (Mounting) | IEC60529 IP67 |
| Power supply voltage (Mounting) | 12 to 24 VDC±10%, ripple (p-p) 10% max. |
| E3T-ST1E3T-ST2E3T-ST3 (Mounting) | E3T-FT1E3T-FT2 |
| Light source (wave length) (Mounting) | Red LED (“Pin-point” LED) λ = 650 nm |
| Diffuse-reflective(background suppression) (Mounting) | 1 to 15 mm |
Technical specifications and performance data
Installation and operation guide