In Stock Hot Product
DEK-OE-5DC/ 48DC/100
DEK-OE- 5DC/ 48DC/100 2940223 PHOENIX CONTACT Solid-state relay terminal block
$0.00USD
4573 in stock
Key Specifications
GTIN:4017918079925
Orderkey:2940223
(General):EN 50178
Catalog page:Page 440 (C-5-2017)
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| GTIN | 4017918079925 |
| Orderkey | 2940223 |
| (General) | EN 50178 |
| Catalog page | Page 440 (C-5-2017) |
| Depth (Note) | 56 mm |
| Packing unit | 10 pc |
| Width (Note) | 6.2 mm |
| (Input data) | Damping diode |
| Height (Note) | 80 mm |
| Country of origin | CN (China) |
| Custom tariff number | 85364190 |
| Insulation (General) | Basic insulation |
| Torque (Output data) | 0.5 Nm |
| Designation (General) | Standards/regulations |
| Screw thread (Output data) | M3 |
| Output circuit (Input data) | 2-conductor floating, 3-conductor ground-referenced |
| (Standards and Regulations) | For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
| Output resistor (Input data) | approx. 22 kΩ (for 3-wire operation) |
| Connection name (Output data) | Input side |
| Degree of pollution (General) | 2 |
| Overvoltage category (General) | III |
| Stripping length (Output data) | 8 mm |
| (Connection data, output side) | EN 50178 |
| Connection method (Output data) | Screw connection |
| Standards/regulations (General) | IEC 60664 |
| Type of protection (Input data) | Reverse polarity protection |
| Output voltage range (Input data) | 3 V DC ... 48 V DC |
| Note (Connection data, output side) | Use of EB 80-DIK... bridges in the DEK terminal blocks: Absorption of humidity from the ambient air as well as an unfavorable tolerance between a larger number of DEK terminal blocks and the EB 80-DIK... bridge may cause (minor) expansion of the DEK housing. When the EB 80-DIK... bridges are used, therefore, it is recommended that these be disconnected after about 10 to 12 DEK terminal blocks and a wire bridge to the next DEK terminal block be inserted in their place. |
| Torque (Connection data, input side) | 0.5 Nm |
| Weight per Piece (excluding packing) | 20.600 g |
| China RoHS (Standards and Regulations) | Environmentally Friendly Use Period = 50 |
| Type of protection (Ambient conditions) | Reverse polarity protection |
| Input voltage range (Ambient conditions) | 4.5 V DC ... 5.5 V DC |
| Limiting continuous current (Input data) | 100 mA |
| Conductor cross section AWG (Output data) | 24 ... 14 |
| Protective circuit/component (Input data) | Polarity protection diode |
| Designation (Connection data, output side) | Standards/regulations |
| Screw thread (Connection data, input side) | M3 |
| Typical response time (Ambient conditions) | 20 µs |
| Typical turn-off time (Ambient conditions) | 200 µs |
| Conductor cross section solid (Output data) | 0.2 mm² ... 2.5 mm² |
| Transmission frequency (Ambient conditions) | 300 Hz |
| Type of note (Connection data, output side) | Note on application |
| Ambient temperature (operation) (Dimensions) | -20 °C ... 60 °C |
| Connection name (Connection data, input side) | Output side |
| Nominal input voltage UN (Ambient conditions) | 5 V DC |
| Operating mode (Connection data, output side) | 100% operating factor |
| Utilization restriction (Key Commercial Data) | EMC: class A product, see manufacturer's declaration in the download area |
| Conductor cross section flexible (Output data) | 0.2 mm² ... 2.5 mm² |
| Operating voltage display (Ambient conditions) | Yellow LED |
| Stripping length (Connection data, input side) | 8 mm |
| Connection method (Connection data, input side) | Screw connection |
| Mounting position (Connection data, output side) | any |
| Typical input current at UN (Ambient conditions) | 6.5 mA |
| Degree of pollution (Connection data, output side) | 2 |
| Overvoltage category (Connection data, output side) | III |
| Ambient temperature (storage/transport) (Dimensions) | -20 °C ... 70 °C |
| Assembly instructions (Connection data, output side) | In rows with zero spacing |
| Standards/regulations (Connection data, output side) | IEC 60664 |
| Test voltage input/output (Connection data, output side) | 2.5 kV AC |
| Conductor cross section AWG (Connection data, input side) | 24 ... 14 |
| Conductor cross section solid (Connection data, input side) | 0.2 mm² ... 2.5 mm² |
| Input voltage range in reference to UN (Ambient conditions) | 0.9 ... 1.1 |
| Voltage drop at max. limiting continuous current (Input data) | ≤ 0.9 V |
| Conductor cross section flexible (Connection data, input side) | 0.2 mm² ... 2.5 mm² |
| Switching threshold "0" signal in reference to UN (Ambient conditions) | ≤ 0.4 |
| Switching threshold "1" signal in reference to UN (Ambient conditions) | ≥ 0.8 |
Product Description
Input solid-state relay terminal, input: 5 V DC, output: 3 - 48 V DC/ 100 mA, terminal width 6.2 mm
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
