In Stock Hot Product
DD32H 2,2/ 8-V-5,08-XX
DD32H 2,2/ 8-V-5,08-XX 1378276 PHOENIX CONTACT Printed circuit board base case, color: black, rated current:..
$2.68USD
3763 in stock
Key Specifications
:2 mm
Step:5.08 mm
note:Complies with WEEE/RoHS, no thread-like materials according to IEC 60068-2-82/JEDEC JESD 201
Result:Test passed
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| 2 mm | |
| Step | 5.08 mm |
| note | Complies with WEEE/RoHS, no thread-like materials according to IEC 60068-2-82/JEDEC JESD 201 |
| Result | Test passed |
| Amplitude | 0.35 mm (10 Hz ... 60.1 Hz) |
| Frequency | 10 - 150 - 10 Hz |
| Packaging | Packed in carton |
| Width [w] | 29.24 mm |
| Height [h] | 25.4 mm |
| Length [l] | 16.97 mm |
| Pin Layout | Linear Pinning |
| Shock Form | Semi-sinusoidal |
| Sweep Speed | 1 octave/min |
| Acceleration | 30g |
| Color (Case) | Black (9005) |
| No. of poles | 8 |
| Product Line | CONNEXIS Connectors M |
| Product Type | Basic socket for printed circuit boards |
| Bore diameter | 1.1 mm |
| Mounting type | Wave Soldering |
| Number of rows | 2 |
| Product Family | DD32H 2,2/.. -V |
| Shock Duration | 11 ms |
| Surface Finish | Galvanic tin plating |
| Test Directions | X, Y and Z axis (pos. and neg.) |
| Contact Material | Cu Alloy |
| Fixed AC voltage | 2.21 kV |
| Mass Resistivity | 0.9 mΩ |
| Number of cycles | 25 |
| Rated Current IN | 8 A |
| Rated voltage UN | 320 V |
| Manoeuvring cycles | 25 |
| Test Specification | DIN EN 60512-1-1:2003-01 |
| Contact Information | According to DIN EN 61984, these connectors have no switching power (COC). For intended use, they must not be plugged in or disconnected while they are still live or under load. |
| Degree of pollution | 3 |
| Dimensioned Drawing | |
| Installation Height | 21.6 mm |
| Insulation material | PBT |
| Mass Resistivity R1 | 0.9 mΩ |
| Mass Resistivity R2 | 1 mΩ |
| Sizing voltage (II/2) | 600 V |
| Weld Shank Length [P] | 3.8 mm |
| Number of poles tested | 20 |
| Sizing voltage (III/2) | 320 V |
| Sizing voltage (III/3) | 250 V |
| Test duration per axle | 2.5 h |
| Stress due to corrosion | 0.2 dm3KNOW2on 300 dm3/40 °C/1 cycle |
| Insulation Material Group | II |
| CTI according to IEC 60112 | 400 ≤ CTI |
| Rated Impulse Voltage (II/2) | 4 kV |
| Minimum creepage value (II/2) | 4.5 mm |
| Rated impulse voltage (III/2) | 4 kV |
| Rated impulse voltage (III/3) | 4 kV |
| Sizing Impulse Voltage (II/2) | 4 kV |
| Ambient temperature (mounting) | -5 °C ... 100 °C |
| Minimum creepage value (III/2) | 3 mm |
| Minimum creepage value (III/3) | 3.6 mm |
| Rated Isolation Voltage (II/2) | 600 V |
| Sizing Impulse Voltage (III/2) | 4 kV |
| Sizing impulse voltage (III/3) | 4 kV |
| Tensile force per pole approx. | 4 N |
| Ambient temperature (operating) | -55 °C ... 105 °C (depending on the derating curve) |
| Rated Isolation Voltage (III/2) | 320 V |
| Insertion force per pole approx. | 4 N |
| Rated insulation voltage (III/3) | 250 V |
| Stress due to the effect of heat | 105 °C/168 h |
| Number of Welding Pins per Potential | 2 |
| Metal Surface Weld Area (Middle Layer) | Nickel (1.3 - 3 μm Ni) |
| Ambient temperature (storage/transport) | -40 °C ... 70 °C |
| Combustibility class according to UL 94 | V0 |
| Vertical impulse tension above sea level | 4.8 kV |
| Metal surface contact area (middle layer) | Nickel (1.3 - 3 μm Ni) |
| Relative humidity (transport and storage) | 30 % ... 70 % |
| Metal Surface Welding Area (Surface Layer) | Tin (3 - 5 μm Sn) |
| Metal surface contact zone (surface layer) | Tin (3 - 5 μm Sn) |
| Insulation Resistance Between Contiguous Poles | > 5 MΩ |
| Minimum creepage value - inhomogeneous range (II/2) | 3 mm |
| Minimum creepage value - inhomogeneous range (III/2) | 3 mm |
| Minimum clearance value - inhomogeneous range (III/3) | 3 mm |
| Areas of application for contact holdersApplication >20 N | Test passed |
| Resistance to surface currents (DIN EN 60112 (VDE 0303-11)) | CTI ≥400 up to <600 |
Product Description
PCB base housing, color: black, rated current: 8 A, rated voltage (III/2): 320 V, surface contacts: tin, contact type: Male, number of rows: 2, number of poles: 8, item family: DD32H 2,2/.. -V, pitch:
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
